Daily traffic volume surveys for the planning and supervision of manual paving require work, time and are not cheap. Furthermore, the accuracy and speed of data collection are not timely. This study aims to bring a smart survey model that automatically collects and processes data on the daily volume...

Infrastructure is one of the important elements in the development of a country. The number of bridge infrastructure projects that can increase the growth of the construction industry in Indonesia must be supported by construction technology as well as the use of precast box girders. Problems arise due...

Nowadays, there are many solar tracking applications using photodiode sensors and Solar Position Algorithm. This tracking depends on the power of light and natural conditions. Inaccurate sun tracking causes the heat concentration to become weak and miss focus on heat-receiving objects. We developed a...

Along with intensive people activities in different places, the demand on transportation increases. For some dense road, motorcycle might be the better choice due to its ability to move flexibly. This may lead to massive use of motorcycle powered by fossil fuel engine. Beside causing severe air pollution,...

Petroleum residue is a by-product of oil refineries that has not been utilized optimally so that it accumulates in the stockpile tank causing disruption of the processing of petroleum into motor vehicle fuel. The catalytic conversion of oil and gas residue into liquid fuel has been carried out using...

The functionalized graphene with epoxy was applied on carbon steel pipes ASTM A53 grade B. The corrosion properties of coated and uncoated carbon steels were evaluated using a three-electrode cell system in NaCl solution at room temperature. The findings suggest a shift of corrosion potential value,...

The depleting reserves of fossil fuels encourage the arrangement of biodiesel as an increasingly popular alternative. The energy is also more environmentally friendly, and at the same time, low in emission content. The biodiesel feedstock source is also easily found in Indonesia’s tropical forests, yet...

Daily monitoring of symptoms of high fever and contact tracing are the main steps in early detection of COVID-19 transmission. A person who is suspected of being infected with COVID-19 with symptoms of a high fever based on a record of his body temperature scan, must as soon as possible get activity...

The tourism sector, especially in Samarinda and its surroundings, is a sector that is experiencing quite dynamic development in supporting economic growth in the area. Apart from being one of the centers of education, Samarinda is also part of a tourist destination city in East Kalimantan. The objectives...

The Micro, Small and Medium Enterprises (MSMEs) still have low involvement in being environmentally friendly. Production processes that are associated with environmental pollution, such as the use of hazardous materials, and produce waste that are not properly managed, threaten sustainability. This study...

This article describes an experimental study of the effect of using sawdust as a mixture of concrete pipe on water absorption and compressive strength. This research was inspired by the amount of sawdust waste from sawmills that had not been utilized. For this purpose, 18 specimens were made with four...

Green space as one of the indicators of sustainable city in riverside area is very important to Banjarmasin, the city of thousands river. However, due to the limited space, no other form of urban green space founded in the riverside area of the city other than greeneries. This research aimed to identify...

Geothermal energy is one of the environmentally friendly energies to generate electricity. Heat energy in the form of steam and hot water in the earth is flowed to the surface and into production facilities and generators to produce electrical energy. Currently there are many types of power plants for...

This journal will describe how the kick handling time is reduced from the actual condition by applying Drillers The method in Well X. This well is an exploration well with the main objective at the 9,000 ft range of depth in Kujung Formation, which has been identified as a gas hydrocarbon reservoir zone....

This paper purpose to design a system in the form of a PV (module) - Wind Turbine Mobile container for the first solution of the disaster area application in the Cepu city of Blora, Central Java. The solution given is to make a mobile container that can assemble a short time as an independent renewable...

Mechanical properties identification of rubber is important to predict rubber performance. Identification of rubber mechanical properties is more difficult to do than it is on metals due to hyper-elastic and nonlinear properties of rubber behavior. Mechanical properties of rubber are often expressed...

Chemical injection using Polymer is expected to increase the pressing efficiency and sweeping efficiency so that the oil recovery can increase after the flood of water from the initial oil reserve (OOIP) in the reservoir. This research will carry out the stages of making polymers that are hygroscopic...

The R-101 reactor is one of the units in the Catalytic Condensation Unit (CCU), XXX Refinery. This reactor functions to reprocess the mixed C4 feed originating from the RCC Complex processing to have a higher selling value such as propylene and LPG. In this reactor, there is a polymerization reaction...

A Long residue is a bottom product of an atmospheric distillation unit of crude oil. Generally this product is further processed in a refinery secondary unit to produce more yield. In case there is no refinery secondary process this bottom product is mixed with chemicals to produce marine fuel oil. This...

Wood is a material used by man to meet his life needs, both as building materials and other tools. Conditions as a construction component require large size, one that can be by making lamina wood. This study is the influence of lamina on physical properties, mechanical properties, healthy classes using...

Diesel Fuel is a liquid fuel used in diesel engines. Diesel fuel is a petroleum fraction that has gone through a series of fraction separations. Petroleum is a mixture of hydrocarbons that are formed naturally. In general, in the liquid phase which is stored in the fuel sotrage tank under certain conditions....

Latterly, the polycarbonare urethane (PCU) has suggested a viable substitude to conventional bearings. The aim of this study is to determine the von Mises stress and contact pressure as a function of different of acetabular cup thickness. The analysis of this study was conducted by the finite element...

Floods in Samarinda occur every year. It’s because the infiltration area is getting narrower, the drainage conditions are full of garbage, high rainfall, and the behaviour of people who litter. So, it needs improvement technology to reduce these problems. One way is to make porous paving that can absorb...

Hard anodization was a method that can enhance aluminium alloy surface characteristics by growing an aluminum anodic oxide (AAO) film on it surface. This method was very applicable to obtain a thick and hard coating. This process was carried out at galvanostatic-potentiostatic mode at high current densities...

Stemming is a process to determine basic word with some rules. In Bahasa Indonesia, the way is to eliminate prefixes, infixes, suffixes, or combination of prefixes and suffixes in derivative words. Several stemming algorithms for Bahasa Indonesia have been developed. But their effectiveness has not been...

This paper has shown that simulation experiment to predict the critical friction area of acetabular liner component on hip joint replacement implant during movement. With the simulation method, that can help find the friction and stress area. The results of the friction simulation, the area friction...

Public education about disaster mitigation in Indonesia needs to be done comprehensively. One of them is through learning at school. This study aims to integrate disaster mitigation in physics learning using a pedagogical approach and teaching materials based on higher-order thinking skills. This research...

Beef is an agro-industrial product that is perishable has a high risk in the pandemic era. The Covid-19 pandemic impacts decreasing consumption of products in various sectors, including beef, with the closure of restaurants and cafes, will affect the accumulation of beef supplies so that the quality...

Online learning and learning literacy during the Covid 19 pandemic is very important and very necessary. Online Learning through smartphones is the leading media for students in the Learning and teaching process. Therefore, learning physics material for optical tools requires the use of interesting and...

The value of Green Open Space is often overlooked or underestimated by policymakers, leaders and developers including animal slaughterhouse industry developers. One of the biggest environmental concerns associated with slaughterhouses is wastewater, water contamination, and air pollution. Therefore,...

Increased load support performance can be achieved by adding texture on the bearing surfaces. A study on the high textured effect on the hydrodynamic thrust bearing by cavitation is presented in this paper. The textured surface is applied in rectangular geometric with several dimension. The single-textured...

Research about hydrodynamic thrust bearing has been developed, the most concern is case about texture with several configuration. Numerical approaches using Reynolds equations and CFD simulation based on Navier-Stokes equations are a common method that used to analyze bearing performance. It is necessary...

Written batik is a work of art that is recognized worldwide as an original Indonesian cultural heritage. The production process of written batik is carried out traditionally and from generation to generation in Solo and Yogyakarta as the oldest batik development areas in Indonesia. Making written batik...

A problem that often occurs in industrial areas is roads damage that are caused by the low carrying capacity of their subgrade as well as by over capacity of heavy vehicles passing through those roads. A lot of waste that is produced in industrial areas, which also another problem, can be used as soil...

The aim of this study was 1) to develop learning media based on android using crossword puzzles to improve vocabulary skills, 2) determine the feasibility of learning media based on android using English crossword puzzles from material experts, media experts, and English learning, 3) Knowing the response...

Layer boundary analysis is an important process in determining the net pay value. Although the layer boundary can be determined manually through mud log data, it can also be determined automatically by signal analysis using wavelet transform. This analysis uses the gamma ray (GR) log data and the resistivity...

Monitoring of environmental pollution level on campus is very important to do. According to UI Green Metric 2018 data, there are 719 campuses to participate in the developing of green campus and issues of sustainability. One of assessment is implementation of smart system to solve environmental problems...

Rubber is a material that easily deforms when subjected to friction, such as in tires, seals and transmission belts. It is very important to understand the relationship of deformation to its stress and friction contact on the rubber. The stress and friction force are closely related to the strength and...

Indonesia is the largest archipelago state is therefore also called Nusantara. Almost every region in Indonesia has a characteristic landmark that describes each area that has tremendous potential in form of lore and attraction. The tremendous potential of this must be backed up with a nice introduction....

A vertical car parking automatic control system using PLC is a prototype system which is intended to minimise the use of car parking size. This prototype is created with a maximum capacity of six cars which will be parked vertically. The vertical car parking automatic control system will use a Mitsubishi...

Problem-solving abilities is one of the competencies that students must have. However, the level of student abilities to address problems related to real-life is still low. This study analyzes the students’ mathematical problem-solving abilities after implementing learning using the MEAs approach in...

The development of bionic aids for paralyzed patients leads to the Brain-Computer Interface (BCI) implementation with various obstacles, especially in interpreting brain signals as triggers for the bionic organ. The reading of electrical signal activity in the brain in the BCI system uses electroencephalography...

The improvement of the student learning process in higher education is of course determined by technological developments. semiconductor technology that can be integrated with various systems such as electronics and informatics. In the teaching and learning process, the implementation of conventional...

Building construction is one of the most complex construction hence construction delay is always happened. Substructure work is the first stage of building construction work. If a delay occurs in the substructure work stage, it will cause a snowball effect which can cause all of the building construction...

At the time of typing the website address (URL), the users often make mistakes (typos) that are unable to visit the desired website. The situation becomes worse when the wrong URL pointing to other websites that do not wish to be visited by the user and may be made available for the aim of cyber-crime....

The railway infrastructure development is being a concern to the government of Indonesia nowadays. One of construction methods mostly applied in building the railway infrastructure is box girder erection with launching gantry. After observing several big projects with this construction method, some problems...

In Indonesia, people have long been produced Eichhornia Crassipes Plant (ECP) stalks as raw materials for handicraft products. Other research has demonstrated that the tensile testing of individual fibers provides relevant data to assess their integrity in drilling mud. Whilst data on the mechanical...

The Covid-19 pandemic has an impact on the tourism sector. Virtual tours become an alternative to adapt to the Covid-19 pandemic. The Geotourism Festival held online in June 2020. However, the environmental conditions such as endemic flora, fauna, landscapes, and ecosystem services could not be covered...

The carbon dioxide is a common impurity to the natural gas production which causing equipment failures due to corrosion and natural gas calorific content decreased. Gathering Station of PT Pertamina EP Asset XY has significant carbon dioxide concentration on its natural gas production. However, installing...

The Gas Turbine Generator (GTG) is an important part of the utility unit at a private company PT. XYZ, namely as a supplier of electricity for the entire plant. The performance of the control system needs to be considered because it is related to efficiency factors, especially to regulate the amount...

User opinions on high-volume social media and various themes provide relevant information for sentiment analysis. This information can be collected and analyzed using a natural language processing with a monitoring system to support classification of criticism and hate speech. Regarding monitoring results,...

Data on the number of motorbikes theft cases each year is quite high, this is related to the number of parties involved in the stolen vehicle business. To ensure the safety of motorbikes, the following research offers a module design that doubles as a hand brake and a fuel cut-off relay. The module works...

This research is a follow-up research to improve performance of Smart Control Electrical Energy (SiSCE) at idle time. In previous research, device serves to control consumption of electrical energy outside from operational hours of the institution. In this study, device performance is improved to be...

Critical land is land that is caused by a decrease in the quality of the land as a medium for vegetation and a medium for water management, which causes the land to be degraded due to various types of land resource use that do not pay attention to the land. continuity. This study aims to analyze and...

As we know, proven oil reserves in the world have decreased, as well as in Indonesia. Currently, proven oil reserves in Indonesia is about 2.483,97 MMSTB in 2019. Assuming a constant production without the discovery of new reserves, then in the next 10 to 11 years Indonesia will not be able to produce...

The source of drinking water for most of the villagers in Malang Regency, East Java comes from springs. 60 springs in Malang Regency; 3 points for surface water, 41 springs and 16 points for deep wells; experience shrinkage. Water protection / conservation by government and non-government is a prerequisite...

Rhizome plants are often used as ingredients or traditional ingredients such as temuireng, temulawak and temumangga. Such rhizomes have the same color, shape, and smell characteristics. In this study, the types of rhizomes were classified based on their color into three classes, namely temuireng, temulawak,...

Squid, known with scientific name Loligo sp, is a group of cephalopods or a type of Mollusca living in the sea, with horizontal distribution area from coast to open sea and vertical distribution area from sea surface to thousands of meters under sea surface in water column. Until now, squid production...

The patients of artificial hip joint are recommended to limit the extreme movements that could cause damage of the device, such as salat movement. As many studies performed the simulation by neglecting the presence of synovial fluid, in this study, we examined the performance of artificial hip joint...

Development of electronic learning (E-learnings), learning resources are teaching materials and a variety of information developed and packaged in various forms based on information and communication technology and used in the learning process. For this reason, special techniques for subject design,...

Solar energy is an energy source that is widely used because it is free energy, eco-friendly and very abundant, especially in tropical countries. However, the energy obtained from solar energy is inconsistent and is heavily influenced by environmental factors. Recently, many researchers have developed...

East Kalimantan is an area which rich in natural resources, as a Mahakam sand and local stones. They also have coconut fiber waste to increase the flexural strength of concrete. This material is still underutilized by the people of East Kalimantan. But, they prefer to use materials from Palu, Sulawesi,...

Argo Bibit is a local business in Magelang District which is engaged in selling fruit seeds by providing various types of durian fruit. Currently, the process of buying and selling seeds is carried out conventionally, prospective buyers must come to the nursery to select seeds to buy and make transactions....

Piles of medical record data in hospitals or health clinics are personal information of a patient. The data is a patient’s medical history that is recorded and stored in the hospital. Hospitals can use this data if at any time the patient returns to the hospital or is used for referrals to other hospitals....

Some people who have foot deformities such as diabetes often experience pain and difficulty wearing shoes. The optimization of advanced manufacturing based on CAM - CNC with EVA rubber foam material has not been optimal. Two new materials are proposed in this paper for manufacturing optimization through...

The progress of the manufacturing industry is very dependent on the development of science and technology. The current industrial revolution 4.0 encourages people to think more creatively in developing their business units. The creative economy helps the government of the Republic of Indonesia to increase...

Currently, the national ceramic industry has developed products based on culture and the creative economy. This product is increasingly in demand by local and foreign consumers. Design development is carried out to face competition in the ASEAN Economic Community (AEC) so that there is no decrease in...

The energy crisis will be come soon and one of the very potentials of renewable energy is the energy usage of water for micro hydro power plant (PLTMH). A centrifugal pump is used for water turbine from the pump channels. The purpose of the study is knowing the influence of modelling the geometry on...

The purpose of this paper is to reveal the effect of fuel injection pressure on the power and torque of a diesel engine. The research method used is the experimental method. Pressure variations of 110 kg/cm2, 120 kg/cm2 and 130 kg/cm2 were applied to a 1981 Chevrolet LUV diesel car. From the experimental...

The paper presents the digital economy strengthening that acted as a stabilizer in the economic sector during the Covid-19 outbreak. In the lockdown period, most interactions between customers and suppliers must occur virtually. Although it still makes exceptions, digital operating is the only way to...

Researchers conducted research at PMI (Indonesian Red Cross) in Tegal City. After visiting PMI, the researchers found that PMI often held blood donor activities in various places. However, the efforts made are still unable to cover the blood needs that are needed each month. PMI has made efforts to send...

Valorisation of glycerol as a by-product of biodiesel production is the main reason researchers to synthesis acetin. It is known as a cold flow improver and emission CO reducer of petrodiesel. Generally, it can be applied as a supplement to diesel and biodiesel. Another route to synthesis it is trans-esterification...

Communication contains two dimensions, verbal and non-verbal. Non-verbal communication behavior was evaluated using the feature extract calculation of the Gray Level Co-Occurrence Matrix (GLCM). Extraction formula consists of feature, contrast, energy, entropy and homogeneity at rotation 00, 450, 900...

Covid-19 has become an important note for the revolution of human civilization, various speculations that discuss the negative impact more intensively than the positive impact of this problem (a case study of a private university in West Manggarai, East Nusa Tenggara). The use and utilization of technology...

The many college graduates who work not by their field of knowledge. Obtained show that the horizontal alignment of < 80% in the last three years has not reached the ideal value. The question that often arises is why this can happen and what influences can determine the quality result of graduates...

Coffee is one of the favorite drinks in Indonesia. The way of making coffee is brewing and using a machine. Most coffee machines use a manual system, so they are less efficient and less attractive. The purpose of this study was to design a coffee machine using a robotic arm. This coffee machine can a...

In the process of painting a product, it commonly occur defect results including corrugated painting, perforated, less smooth, speckled and uneven surface of painting. This can occur due to the setting parameters in the process of painting is not appropriate. This research is done to reduce the high...

This study was to determine the determination of the Cost of Goods Sold for natural gas produced by the Central Processing Plant in Blora District. Total production of natural gas distribution in 2019 through the Natural Gas Distribution Network is 2.36 MMCFD. The cost of natural gas products which has...

In recent years, ZigBee technology has received many significant developments and high attention as the license free ISM frequency spectrum is available for commercial communications and applications. ZigBee’s attractive nature coupled with rapid growth in wireless communication systems has turned ZigBee...

Dengue is a viral infection transmitted by Aedes mosquitos. This disease mostly spread in the tropical and sub-tropical countries and according to WHO, the dengue outbreaks has increased 30-fold over the last five decades. The disease is still an ongoing burden of throughout the world. In Indonesia,...

Home industry handicraft products continue to survive in the current Covid-19 pandemic conditions. One way to survive in this condition is to innovate products to increase profits. This innovation can be made through the use of existing raw materials to produce products that are different from before....

QuillBot will write your text for you. Paste or write something here and then press the Paraphrase button. Climate change is marked by frequent occurrences of drought and huge waves, which affect agriculture and fisheries. These sectors are the major means of livelihood of the majority of households...

Greenhouse gas emissions increase with the use of diesel fuel. The reduction of greenhouse gas emissions can be done by using the desulphuration method. However, low sulfur in diesel fuel causes low lubricity values. One of solutions to this problem is by adding a bio-additive compound. In this research,...

The performance every mmotorcycles is influenced by several factors as usual, including the usage of fuel typed. The study aim was to determine the effect fuels such as pertalite, pertamax, and pertamax-turbo type toward the power performance, torque and exhaust emissions produced by a 4-stroke motorbike....

Nonlinear system is always become interesting topic to be researched. Level system is the one of them. Deadtime, changeable dynamics, etc make the conventional controller like PID have to be improved and optimized to face this system. In this paper, we propose a comparative study about PID control which...

Yogyakarta City has a high population density and is classified as a large city. During its development, the increase in population led to the development of a city that expanded beyond administrative boundaries. In addition, differences and concentrations of economic activities in Yogyakarta City indicate...

Video streaming over Bluetooth network as a medium of learning at higher education in the world began in 2004, in Indonesia, it began in 2012. Unfortunately, the development of video streaming using Bluetooth network has not been used optimally in the field of higher education, especially at client-server...

This study was an effort to obtain high yield of quercetin extraction from kenikir leaves employing several extraction methods, which were maceration, percolation, soxhlet, and reflux, using methanol as solvent followed by quercetin incorporation into a Nanoemulsion system with Rice bran oil (RBO) as...

Coconut (Cocos nucifera) is a plant belonging to the Arecaceae family with a myriad of uses. Virgin coconut oil (VCO) is one of the products that can be derived from this plant. The free fatty acid content, especially lauric acid, determines the quality of VCO. There are several methods of VCO production,...

Teaching and learning activities often have problems with the absence of lecturers from class in the teaching and learning process even though the lecturers’ attendance is recorded. The RFID presence system which has been widely researched does not perform the presence of the two objects, namely lecturers...

Pectin is usually isolated using the conventional extraction methods are time consuming. Pectin from sentul peel has been successfully isolated by using Microwave Assisted Extraction (MAE). This method has a short processing time and little solvent needed. This study is aimed to determine the effect...