Proceedings of the International Conference on Computer Information Systems and Industrial Applications

+ Advanced search
272 articles

Simulation Algorithm of Shortest Match Path Based on Time Series

M.J Wu
Two new corresponding algorithmsare proposed based on the analysis of several classicalalgorithms to solve the problem of the shortest match path based on time series.Experiments show formatting reverse branch algorithm with high execution efficiency can obtain all matching path. Dynamic path matching...

The Research of Voltage Flicker Detection Based on IRPT and Mitigation Based on BESS

T. Yan, Z.Z Qu, P.Y Jia, Y.J Liu, J. Hu, D. Hui, X. K Lai
This paper analysis the PCC voltage fluctuation from the perspective of active and reactive load, and points out that voltage flicker mitigation needs both active and reactive power compensation. Battery energy storage system designed by this paper adopts the current feedforward decoupling control, energy...

Spatial Error Modeling and Simulation on Sheet Metal Assembly in Single Station

D.Z Yu, W.P Lv, L.H Zhou, X.H Xu
Based on analyzing error model of Sheet Metal Assembly, namely SMA, at home and abroad, this paper establishes the propagation model of spatial error of SMA in single station, and founds the rigid error model by differential motion theory and coordinate conversion theory. On condition of satisfying the...

Longitudinal Effects of Entry-Level Truck Driver Training Methods

R. J Hanowski, J. F Morgan
This study evaluated the effectiveness of utilizing a driving simulator for entry-level truck driver training and testing. The 107 participants were from one of four groups: conventional 8-week certified course, conventional 8-week certified course with 60 percent of driving in a simulator, informal...

Computer Simulation of Spacecraft Onboard Equipment

L. Nozhenkova, O. Isaeva, E. Gruzenko
This article presents the results of application of the computer simulation technology for intellectual support of spacecraft onboard equipment design. Methods and instruments allowing construction of informational and graphical models were developed describing architecture of onboard systems and configuration...

The Research on Flatness Control Simulation for Cold Tandem Rolling Mills

X.M Zhou, X.X Yue
The cold tandem rolling of metal strip presents a significant control challenge because of nonlinearities and process complexities. Flatness control system is a hot topic on cold tandem rolling process. The process parameters and state variables cannot be measured due to the rolling process complexities....

Simulation of Two Stages Cascode LNA Using Ladder Matching Networks for WiMAX Applications

A.B Ibrahim
This paper presents a simulation of two stages Cascode LNA using ladder matching network applicable for WiMAX applications. It’s using the FHX76LP Low Noise SuperHEMT FET transistor. The LNA designed used Ladder-matching network consisting of lump reactive element at the input and the T-matching network...

Optimization Design of Pile Supported Embankment on Soft Soil Ground

J.B Zhao, J. Zhang
To optimization design of pile supported embankment on the soft soil ground, the numerical simulation is carried out to investigate the performance of pile supported embankment. The four embankments investigated include supported by piles only case, supported by caped piles only case, supported by both...

An Optimized Particle Swarm Optimization (PSO) Algorithm Smoothing the Output of Wind Power

X.Y Zhang, N. Zhu, M.L Yuan, J.Y Xu, H.T Dai
The output power of wind turbine caused by the variation of wind fluctuates badly, which causes instability of the Power Grid. To smooth the output of wind power to Grid, an Energy Storage System (ESS) solves this problem by absorbing and releasing the wind turbine energy. The smooth performance depends...

Simulation Analysis of the Orientation Ability for Galileo in Asia-pacific Region

L.L Cui, Y.L Lu, M. Liao
On the base of satellites' circulate rule, Galileo system simulation software is exploited and operated in the paper. The capability of Galileo navigation and positioning is analyzed and validated thought positioning precision in five different areas is computed. These demonstrates clear know about good...

Comparison between Three Different Types of Variable Step-Size P&O MPPT Technique

B.R Peng, J.H Chen, Y.H Liu, Y.H Chiu
The P-V curve of solar cell is nonlinear, depending on both illuminance and temperature. The MPPT technique is compulsory in order to maintain the output power of the solar cell at its maximum value. P&O MPPT technique is the most commonly used in the industry; however, the main problem is to strike...

Adaptive Fuzzy Sliding Mode Control for PMSM System

J.T Fei, Y. Wang, Y.C Xue
This paper investigates the position regulation problem of permanent magnet synchronous motor (PMSM) servo system based on adaptive fuzzy sliding mode control (AFSMC) method. Adaptive fuzzy sliding mode control is designed by using sliding surface as input of fuzzy controller, and adaptive fuzzy controller...

A Single-Stage Dimmable Multi-String HB-LED Driver with High Power Factor and Temperature Compensation

Y.H Chiu, Y.H Liu, Y.L. Chen, S.C Wang
This paper proposes a single-stage constant-current driver with power factor correction (PFC) and temperature rise compensation for igniting multi-string high-brightness light-emitting diodes (HB-LEDs) in parallel connection. The devised dimmable LED driver is composed of a coupled inductor single-ended...

Expression of Relation of Medical Institutions and the Simulation of the Relation Recovery for Disaster

S. Mizuno, M. Seki, Y. Fujisawa, A. Kakehi
The present medical institution cooperate each other, such as specialty skills or regional peculiarity. However, when disasters, such as an earthquake, an institution may not have function as a medical institution and the balance of the medical service at the time will usually unstable. Restoring medical...

Building Energy Efficiency Improvement via Smart Building Solutions: Introduction to Methodologies

D. Woradechjumroen, H. Li
Because of the increase of the commercial sector in energy consumption and greenhouse gas emission, any successful response to the threats for achieving energy and environmental sustainability must be significantly considered. Specifically, air-conditioning systems presently consume around 60 percentages...

Multivariable Statistical Correlation Measure Applied to Association Rules Mining

J. Hu, H.F Jian, J.H Sun
Correlation is usually used in the context of real-valued sequences. However, in data mining, the values range may be of various types-real, nominal or ordinal. Regardless of their type, the methods on measuring correlation between multivariable sequences of data are reviewed. In particular, a new method...

The Influence of Bird’s Shape and Attitude on Bird-strike Analysis of Structure

J.F Kou, F. Xu
In order to research the influence of bird shape and attitude on structure for bird strike, bird-strike on elastic panel investigated with various length-to-diameter aspect ratio and different attitude angle of bird through numerical simulation. The results indicate that aspect ratio of bird strongly...

Deployment Analysis of a Deployable Truss Structure

X.K Wang, B. Cai, H.F Fang, X.F Ma
The deployment of a tetrahedral truss structure with spring driving system is a fast process. A deployment experiment of the tetrahedral truss structure has been designed to study the deployment dynamic characteristics of this tetrahedral truss structure. Using a high-speed camera and a force transducer,...

Modelling Kinetic Indentation in Topocomposite Surface of Elastic Rigid-plastic Solid Bodies

N. Voronin
The mechanics of a rigid sphere contact interaction with the topocomposite surface of elastic rigid- plastic solids is analyzed. Analytic dependencies are obtained describing both the character of load changing on rigid pyramidal and spherical indenters versus the depth of indentation in a topocomposite...

Analysis of Multi Aerial Targets Threaten Degree on Terminal Defense System

L.G Chen, X.L Liu, Y. Zhang
The characteristics of incoming aerial target are multi batches and multi azimuths in modern war. The influence of target threaten degree have many kinds of factors also. Due to this, the paper analysed the factors influencing the threatendegree of aerial targetsand established the membership functions...

Molecular Dynamic Studies of the Vacancies Interaction with the Grain Boundaries

A.S. Dragunov, A.V Weckman, B.F Demyanov
In this paper the method of molecular dynamics used to studythe interaction of lattice vacancies with symmetric tilt grain boundaries (GBs) in aluminum. A linear dependence between the numberof captured vacancies and the distance to the GB’s plane was found. The average rate of vacancy migration to the...

Hydrodynamic Peculiarities of Fluid Flows in a Human Sigmoid Sinus by Data of Phase Contrast MR-angiography

A. Tulupov, V. Gorev
A model of a human sigmoid sinus was studied using magnetic resonance imaging. MRI images were obtained in three transverse and two longitudinal sections at different levels. The findings indicate that, at the exit of the cranial cavity, this venous vascular structure forms a flow pattern with highly...