Proceedings of the 2017 2nd International Conference on Electrical, Automation and Mechanical Engineering (EAME 2017)
Session: Mechanical Engineering and Applied Mechanics
17 articles
Proceedings Article
Gradual Change Reliability Sensitivity Design for Components with Arbitrary Distribution Parameters Based on Measured Information
Xingang Wang, Baoyan Wang, Miaoxin Chang, Mingming Yan
Reliability design of mechanical components mostly focused on establishing pure theoretical mathematical model at present, without involving measured information for working components and gradual characteristics of parameters into theoretical model, which caused some error for reliability design of...
Proceedings Article
Research on Global Structure for Digital Quality Testing Based on Manufacturing Factory
Mengqing Tanli, Yan Jiang, Xiang Wang, Yulin Wang, Rushu Peng
This paper discusses the global structure of the digital quality testing, and briefly investigates the arrangement of testing equipment and hardware, the composition of software, the responsible branch and personnel, the control structure of quality data and information, and the arrangement of measuring...
Proceedings Article
Improvement Method Optimization of Automobile Warranty Quality Issue
Hongliang Du, Junyi Lv, Zikun Ye, Rui Miao
Automotive warranty quality issues from all aspects of quality control. In this paper, through the analysis of the existing automobile warranty problem solving process and the status of project quality management, combined with the current warranty quality problem solving challenges, expounds the current...
Proceedings Article
Mechanical Design of a Wheelchair with Multi-Posture Characteristics
Duojin Wang, Hongliu Yu
At present, an electrical wheelchair cannot meet the needs of patients, like paralyzed patients, who spend most of their time on beds. This paper presents a mechanical design of a wheelchair which can transform to a sitting, lying and standing posture. The standing posture can help patients to reach...
Proceedings Article
Soft Robotic Hand Exoskeleton Systems: Review and Challenges Surrounding the Technology
Qiaoling Meng, Shichuan Xiang, Hongliu Yu
Soft robotic hand exoskeleton systems are taken into account to solve the problems happened in the hand rehabilitation, such as long-term training for stroke patients and heavy workload for physicians. These systems are one of the hot issues in recent robotic research because that they are not only applied...
Proceedings Article
Constraint Solving Order in Position Based Dynamics
Yufeng Gu, Kejian Yang, Cong Lu
In order to solve the problem that the adjustment sequence depends only on the data structure in the process of constraint satisfaction, a method of propagating from the fixed points is proposed. The method analyzes the internal force of fabrics in the real world, sorts the particles in ascending order...
Proceedings Article
Model of Torque in Disc-Type Magnetorheological Brake Driven by Shape Memory Alloy
Jianzuo Ma, Baisen Zhao, Tian Fu
A magnetorheological brake driven by shape memory alloy is presented in this paper. The shape memory alloy spring is used to push the magnetorheological fluid into the working gap under thermal effect. Herschel-Bulkley model is used to describe the constitutive characteristics of magnetorheological fluids...
Proceedings Article
Hazard Analysis and Error Proofing in Spacecraft General Assembly
Botao Xu, Zhikai Fang, Yugang Liu, Tao Guo, Zhengyi Xiao, Bin Zhang, Weibing Dai
The paper analyzes occurrence of hazardous factors in spacecraft general assembly process, and analyzes the level and effect of hazards in various general assembly units. The methodology of designing error proofing for general assembly is discussed, a database of error control elements is established....
Proceedings Article
Study of the Method to Capture the Loose Particles inside the Device Cavity
Xuan Pei, Shanbin Xi, Zhaofeng Gao, Kui Zhang
The paper introduced the method to capture the particles inside the devices cavity in detail. The method included several steps, which were as follows: particles detection, grinding cover plate, cleaning cover plate, holing cover plate, capturing particles and particles analysis. The particles would...
Proceedings Article
Experimental Study for Evacuated Tube Solar Collector with/without a Compound Parabolic Concentrator
Xu Jia, Guoxin Wu, Tzer-Ming Jeng, Sheng-Chung Tzeng, Weikai Huang
This paper explored the thermal performance of evacuated tube solar collector with/without a semicircular compound parabolic concentrator (CPC). The configurations of tested systems were: (1) the system without CPC, (2) the system with Model A CPC (3) the system with Model B CPC. This work investigated...
Proceedings Article
A Comprehensive Evaluation on Coupling Interaction Characteristics of Generalized Load
Han Shu, Dezhi Li, Yongxiu He
In order to characterize the interaction between the generalized load and the distribution network in the future, this paper summarizes the interactive mode between the generalized load and the distribution network under the environment of smart power supply first. Then, the evaluation index system and...
Proceedings Article
Research Status of Steel - Aluminum Joining Technology for Automobile Parts
Kai Xu, Qirui Cui, Guoqiang Li, Shuquan Zhang
Lightweight is an inevitable trend for the future development of automobile bodies. There are several suitable for steel-aluminum lap connection technology, with the application of steel-aluminum hybrid body. Mechanical connection technology, welding technology and adhesive riveting composite connection...
Proceedings Article
Linear ODE Based Geometric Modelling for Compressor Blades
Guanying Huo, Xin Jiang, Danlei Ye, Cheng Su, Zehong Lu, Bolun Wang, Zhiming Zheng
Geometric modeling based on physical environment of the objects has been emerging as a powerful modeling technique and started to gain popularity for surface modeling and design. These methods usually allow the geometric objects to be defined and governed by a set of differential equations. In this paper,...
Proceedings Article
A Tool Path Generation Method for Sculptured Surface Based on the Vector Field of Maximum Strip Width
Cheng Su, Xin Jiang, Guanying Huo, Danlei Ye, Zehong Lu, Bolun Wang, Zhiming Zheng
For three-axis sculptured surface machining, a tool path generation method based on the feed directions of maximum machining strip width is proposed. We use a B-Spline stream function to reconstruct the vector field of feed directions, and give the initial tool path by one of the iso-lines of the stream...
Proceedings Article
Development and Research of the Comprehensive Performance Test Platform of the Spindle Parts
Xiangjuan Bai, Jiyuan Li, Weidong Gou, Zhaoshun Liang
In order to simultaneously obtain the comprehensive performance and mechanical characteristics of spindle parts of CNC machine tools, In this paper, through analyzing the testing technology of spindle parts performance, we designed a testing platform. It considers multiple types of spindle parts and...
Proceedings Article
Research on the Sealing Performance of Metal Rubber Material in High Thermal Environment
Hui Yan, Wei Yao, Yalei Zhao, Xiang Bi, Shengbo Li, Hongyuan Jiang
Based on the research on elastomer contact mechanics theory and percolation theory, this paper analyzes the sealing performance of metal rubber from the micro perspective of sealing coupling surface topography. By constructing the function of contacting rough surface height, the leakage model of metal...
Proceedings Article
Accuracy Investigation of Features Produced by Additive Technology
Katarina Monkova, Peter Monka
The article deals with investigation of accuracy of shaped features produced by additive technology. Within the study, a complex component was designed so to include many specific geometrical features that represent the most used shaped units of technical parts. During presented research, deviations...