Proceedings of the 5th International Conference on Civil Engineering and Transportation 2015
1098 authors
- Li, Hua
- Failure Analysis of Welding Insulation Cyliender
- Li, Huaijian
- Application of Prestressed Concrete Composite Box-girder Bridges with Corrugated Steel Webs
- Li, Huifang
- Design and Implementation of Strain Strengthening Automation Control System for Austenitic Stainless Steel Pressure Vessels
- Li, Jiachun
- Along the river road water damage control and slope
- Li, Jiachun
- loess area roadbed water damage and prevention measures
- Li, Jiachun
- Analysis of soft soil subgrade construction
- Li, Jianbin
- Finite element analysis on mechanical properties of new section of aluminium alloy members under bending moment
- Li, Jingjing
- Research on Different coupling methods in Jack-up Simulation
- Li, Jinping
- Study on New Thermal Drying Methods for Sewage Sludge Using Microwave and its Mechanism
- Li, Junpeng
- A review of operational barriers and causes within industrial chain for construction waste recycling in China
- Li, Junzhe
- Research on iron ore tailing improving Compressive Strength of Alkali-activated Slag Foamed concrete
- Li, Junzhe
- Experimental study on hydraulic rock damage
- Li, Ke-Xin
- Stress analysis of the through arch bridge double boom system
- Li, Li
- Vehicle Classification Based on Locational Matrix and Edge Region Minimization
- Li, Li
- The application of Bayesian filter and neural networks in lane changing prediction
- Li, Liang
- 3D graphic computation and cost analysis of the underground substation
- Li, Lin
- Seismic Response Analysis for Shallow Buried and Unsymmetrical Loading Tunnel
- Li, Longbin
- DEM Simulation and Analysis for Drop-Weight Experiments of Barite Concrete Beam
- Li, Midan
- Effect of the mould pressure on tribological property of carbon/phenolic resin composites
- Li, Ming
- Application of Prestressed Concrete Composite Box-girder Bridges with Corrugated Steel Webs
- Li, Minggao
- Through Station Capacity Calculation Models for Through Operation between Urban Rail Transit and Suburban Railway
- Li, Mingzhen
- Effect of environmental atmosphere and stress-loading storage on the intrinsic stress and its distribution in polycarbonate screw cap
- Li, Mujun
- Optimization Design Combined Thermal & Deformation Evaluation for a Precision Hot-pressing Furnace
- Li, Peng
- Numerical Study of Effects of Different Base on Asphalt Pavement Responses Using FEM
- Li, Qinghua
- Application Study of 300mm Large Size Angle Steel in ±1100kV Ultra-high Voltage Tower Transmission Tower
- Li, Ran
- Damage identification method of suspension bridge structure based on wavelet - artificial immune algorithm
- Li, Ronghui
- Study on the Influence of Fast-growing Eucalyptus Planting on Reservoir Water Quality in Guangxi Based on N Stable Isotope Tracer Technology
- Li, Shaokang
- The research on physical simulation of land subsidence in China
- Li, Shengxiao
- The Unique Charm of the Context to the Architectural Environment
- Li, Shengxiao
- Discussion on Architecture Conception
- Li, Shengxiao
- Low Carbon City and Analysis of its Guidance to Urban Planning
- Li, Shengxiao
- The Theory of Practice and Prospect of the Low Carbon City Planning
- Li, Shi-Feng
- Optimal Design of Truss Structures based on the New Improved Ant Colony Optimization Algorithm
- Li, Shimin
- Higher Order Crack Tip Fields for Physical Weak-Discontinuous Crack of Linear FGMs Plate with Reissner’s Effect
- Li, Shouju
- Numerical simulations for allocations of internal forces on double-layer linings of shield tunnel
- Li, Shuchen
- Experimental Study on Deformation and Destruction of Post-peak Fractured Rock Mass
- Li, Tonglin
- Analysis on Behavior of web buckling of Hexagonal Castellated Beams with Transverse Stiffeners Under Uniform Loads
- Li, Tonglu
- Forming Mechanism of the Loess Landslides Triggered by Irrigation and Seasonal Freezing
- Li, Wanheng
- Damage assessment of the longitudinal connection of simple supported-to-continuous girder bridges constructed with hollow slabs
- Li, Wei Jie
- Research on the Protection of Industrial Heritage under the Cultural and Creative Industries
- Li, Weimin
- A demand-oriented examination of local park services: Park types, sizes, features and actual use in the City of Los Angeles
- Li, Xian
- Effect of Recycled Waste Brick Fine Aggregate on Compressive Strength and Flexural Strength of Mortar
- Li, Xian
- Mechanical properties of concrete made from aggregate saturated in concrete interfacial agent
- Li, Xiao-Mei
- Flexural vibration reduction of phononic crystal floating bridge
- Li, Xiao-Mei
- The state-dependent dilatancy properties of rockfills considering the influence of gradation
- Li, Xiaoli
- Review of Application Research of BRBs in Seismic
- Li, Xin-Xin
- Evaluation of Equilibrium State of China Real Estate Market Based On AHP
- Li, Xiu
- Study of three-dimensional NMR forward modeling using finite element method
- Li, Xuguang
- The Numerical Analysis of Landslide Anti-slide Pile Mechanism under the Condition of Rainfall
- Li, Y.G.
- Fabrication of Micro Solid Metal Needles by Electroplating from PMMA Mold
- Li, Yan
- Analysis and Forecast of Construction Waste Based on ARIMA Model
- Li, Yan
- Design and optimization of the pipe fixed supports in the super high-rise building
- Li, Yang
- Progress in the Research of Virtual Trial Assembly
- Li, Yang
- Automatic control system of automobile suspension
- Li, Yijiang
- Heat treatment furnace area cover crane girder factory owner durability analysis of a cold rolling plant
- Li, Ying
- The Research on Stress Intensity Factor of Steel Bridge Members Based on Finite Element Method
- Li, Ying
- Through Station Capacity Calculation Models for Through Operation between Urban Rail Transit and Suburban Railway
- Li, Yong-Feng
- The effect of the external carbon source on each stages of A2/O process for simultaneously removing nitrogen and phosphorus
- Li, Youyun
- Research on surrounding rock phase change effect to the initial supporting in cold region tunnels
- Li, Yuanyuan
- Study on bearing capacity of the reinforced concrete beam with CFRP experimental
- Li, Yulong
- Stochastic Reliability Analysis for Drum System of Hang Type Centrifuge
- Li, Yupeng
- Synchronous detection technology optics surface microstructure Research and characterization methods
- Li, Zhaojun
- Stochastic Reliability Analysis for Drum System of Hang Type Centrifuge
- Li, Zhe
- The Structural Characteristics and Planning Strategy of the Urban and Rural Elderly Facility System
- Li, Zhiqiang
- Study On the Beam Bending Test of Basalt Fiber and Wood Composite Board
- Li, Zhiyong
- Preliminary Experimental Study on Heat Transfer Characteristics of Wall with Automatic Adjustment of Heat Transfer Coefficient
- Liang, Benliang
- Experimental Study on Seismic Behavior of High Strength Concrete Short Columns with High Axial Load Ratio
- Liang, Benliang
- Experimental Study on Seismic Behavior of High Strength Reinforced Concrete Frame Columns with High Axial Pressing Ratio
- Liang, Bin
- Mechanical Characteristics of Concrete Bottom Slab in Elevated Pile Cap Steel Boxed Cofferdam in a Bridge
- Liang, Bin
- Study on the Influence Factors of Cast-in-situ Bored Pile Bearing Capacity under Karst Geology Condition
- Liang, Bin
- Analysis on Local Stress of Steel-concrete Joint Section of Weihe Grand Bridge
- Liang, Bin
- Research on Structure of Steel-concrete Joint Section in Hybrid Girder of a Grand Bridge
- Liang, Hong
- Research of Optical Cable Overhead Laying Automation
- Liang, Juxia
- A Comparative Study on Literature of Urban Park Research Published During 1983-2013
- Liang, Rui
- Green Building Assessment of the Desertification Rural Area in Northwest China
- Liang, Xiaoyong
- Analysis on the production situation of new wall materials in each region of Hebei Province
- Liao, Xian
- Analysis on Static Performance of KT Type Circular Steel Pipe’s Tubular Joint
- Liao, Yiping
- Effect of glass powder instead of mineral powder on asphalt mixture
- Lin, Jinmei
- Failure Analysis of Welding Insulation Cyliender
- Lin, Ning
- Automated EDM-Based Center-Punching Systems for Pipe Production Lines
- Lin, Wei
- Multiple Adaptive Fading Cubature Kalman Filter for INS/GPS Integrated Navigation
- Lin, Wenjuan
- A Life Prediction Model for Structure under HCF-LCF Interaction Loading
- Lin, Yuan
- Maintenance Scheduling Optimization for 30kt Heavy Haul Combined Train in Daqin Railway
- Ling, Xiaohong
- Defining Accessibility of Open Space in Relation to Urban configuration: Case Study of Wanchai, Hong Kong
- Ling, Xiaohong
- Morphological Transformation of the Wanchai District of Hong Kong
- Liu, Ben-Xue
- The design of Mechanical automatic processing equipment for refractory brick
- Liu, Bo
- Seismic Response Analysis of Medium Pressure Vertical Multilayer Pipe Support System in High-rise Building
- Liu, Bo
- The Uniformity Tests of A Rainfall Generator
- Liu, Boquan
- Experimental Study on Seismic Behavior of High Strength Concrete Short Columns with High Axial Load Ratio
- Liu, Boquan
- Experimental Study on Seismic Behavior of High Strength Reinforced Concrete Frame Columns with High Axial Pressing Ratio
- Liu, Dan
- Design and Experimental Research on Natural Ventilation Windows Based on Active and Passive Noise Reduction Technologies
- Liu, Deming
- Simulation to Interior Microclimate of Swimming Hall under Different Seat Arrangements and Partition
- Liu, Gaoping
- Study on the creep and fatigue interaction of a Nimonic Alloy 75 under multiaxial nonproportional loading
- Liu, Guo-Liang
- Mechanical properties of concrete made from aggregate saturated in concrete interfacial agent
- Liu, Guoqiang
- Influences of Recycled Concrete Aggregate and Flyash on Properties of GRC
- Liu, Haixiang
- An Adaptive Smith-Fuzzy PID Control Design for Steering and Speed Control System of Electric Vehicle
- Liu, Han
- Effect of the mould pressure on tribological property of carbon/phenolic resin composites
- Liu, Han Fang
- Research on the Protection of Industrial Heritage under the Cultural and Creative Industries
- Liu, Hongbin
- Heat treatment furnace area cover crane girder factory owner durability analysis of a cold rolling plant
- Liu, Hongbin
- Test and analysis of the main crane girder stress and the dynamic characteristics of column