Proceedings of the 2016 International Conference on Engineering and Advanced Technology

Session: Mechanics,Electronic and Control Engineering

21 articles
Proceedings Article

Characterisation of the multi-junction solar cell with dish-style photovoltaic concentration system

Zilong Wang, Huajie Huang, Hua Zhang, Yankun Wang, Yankang Chen, Siyue Tang
A paraboloidal concentrator with homogenizer was developed for a three-junction GaP/InGaAs/Ge solar cell. The concentration ratio of this system was 200X and the photovoltaic cell was cooled by heat pipe. According to the experiment result, when the average direct solar radiation and the ambient temperature...
Proceedings Article

The Single-vector Compressed Storage of Tangent Matrix

Yongyan Hou, Zhiguo Ren, Lanqing Wu
Matrix is a mathematical object, commonly used in scientific computing and engineering calculation. In the data structure we are not interested in data itself, but how to store the elements in the matrix, and make the various operations can run effectively. The main purpose of the compressed storage...
Proceedings Article

The Finite Element Strength Calculation of 70T Concentrated Nitric Acid Tank

Song Cang
In this paper, the static load of 70t aluminum railway tank is calculated by the calculation of the FEM in different working conditions. It describes the selection of allowable stress about Aluminum material 1050A which used in stress analysis intensity calculation of Aluminum railway tank. The results...
Proceedings Article

The Finite Element Analysis of EBZ160 Running Mechanism of Road Header

HongDong Ding
Through analyzing the force of the machine running gear and the calculation of its driving force, the strength of drive wheels is checked. To analyze the stress distribution and deformation of the driving wheel in working situation, the drive wheels working environment in Ansys is simulated. The results...
Proceedings Article

Reciprocating Parallel Milling Macro Programming

Mingyao Wang
The reciprocating parallel milling processing program is written by using the plunge count and plunge height in the Z direction on CKA6136 CNC milling machine of FANUC0i system and the method and idea of writing the milling open parts surface program by macro programming are analyzed.
Proceedings Article

Mechanism Research on Treatment Measures Regarding the Branching Reach with Bend at the Middle and Lower Yangtze River after Water Storage of Three Gorges Reservoir

Yude Zhu
This paper analyzes the characteristics of the flood land change at the branching reach with bend after water storage of Three Gorges of Yangtze River, and demonstrates in combination with numerous engineering practice researches that the treatment measures regarding the branching reach with bend at...
Proceedings Article

Deformation analysis for the key structure of linear visual detection device

Junyi Hou, Zailiang Chen, Zhenyu Chen
According to the different installation place of linear array camera component, the material property and mesh are set for the profiles which are fixed with camera by ANSYS Workbench. In the gravity of relevant parts, do the finite element simulation of deformation. According to the flexural deformation...
Proceedings Article

Analysis of Ground Displacement Induced by Double-tube Parallel Shield Tunnels

Weiquan Rong, Hong Yuan, Xiongfei Yang, Jiayu Wu
Based on Mindlin displacement solution, we fully analyze the mechanical behavior of ground surface settlement caused by tunnel construction. In this paper, modified formula of ground deformation induced by ground loss is offered and applied to estimate settlement induced by the double-line tunnel construction...
Proceedings Article

Design and Development of Multi-purpose Combination Tool for Testing Voice Cable

Shu Jiang, Zhe Sun, Qiang Li, Ying Zhang
This paper introduces the necessity of using the tools for testing the cable of voice distribution frame. A detailed comparison of existing voice cable testing tools is provided, a design scheme of multi-purpose combination tool for testing voice cable is provided. This paper develops a multi-purpose...
Proceedings Article

Design and numerical analysis of a compound hydrocyclon

QiDong CHEN, YueGao SUN
The paper determines the structure of the compound hydrocyclone, by using RNG model for calculation of flow distributor. By utilizing Reynolds Stress Model (RSM) and Discrete Phase Model (DPM), the internal flow fields of the hydrocyclone with different tangents of inlet channels are analyzed and the...
Proceedings Article

Influence of the Driver Style difference in the Acceleration Process on the Energy Consumption of the EV Bus

Ying YAN, YeCheng FAN
The relationship between the difference of the driver behavior and energy consumption in the same bus line was studied through analyzing the acceleration process of the driving cycles in order to solve the problem that the practical benefits in endurance mileage of the electric buses differed a lot....
Proceedings Article

Tests on droplets and dust suppression characteristics with self-priming spray magnetization

ZhongFei MA, HuiFeng HUANG, XinYu XIONG, DongHua XU
To improve the effect of spray and dust reduction, self-priming spray magnetization dedusting was put forward. Moreover, some experiments on droplets and dedusting characteristics were carried out, such as traditional single-nozzle spray, self-priming non-magnetic spray, self-priming spray with magnets...
Proceedings Article

Channel Length, Drift-region Distance, and Unit-Finger Width Impacts on the HBM Robustness for the 600 V N-Channel LDMOS Transistors

ShenLi CHEN, ChihYing YEN, YiHao CHAO, KueiJyun CHEN, ChihHung YANG, YiCih WU, YiHao CHIU
An UHV n-channel LDMOS transistor is usually used for the power management AC-DC convertor that need to enhance the ESD robustness to resist external transient noises. In the cost saving consideration, an UHV nLDMOS unit should be both acted as a circuit element and anti-ESD device because of its large...
Proceedings Article

The Dynamic Multi-stack Storage Structure

Zhiguo Ren, Wenjiao Da
The multi-stack has been designed based on sequence storage in reference [1]. But there have two problems: 1.Usually allocate the storage space to the multi-stack in advance, but when one of the stacks has too much data elements, Then the push stack operation will cause the space insufficient, appear...
Proceedings Article

The realization of automatically adjusting the adaptive PID parameters based on the theory of fuzzy mathematics

DeSheng Zhong
Design of the main controller using fuzzy logic theory on the basis of the traditional PID control, Using the fuzzy mathematics theory, the use of fuzzy sets to represent the regular condition, and the fuzzy control rules and the relevant information in the control system in the knowledge base as a knowledge,...
Proceedings Article

The application of unified power flow controller in power system of dynamic power quality

Jun Li, Kuikui Zhang, Tingjian Zhong, Bin Chen, Yiwen Hu
UPFC is one of the series-parallel combination FACTS devices, it has no additional storage or power equipment,but it can be simultaneously achieved active and reactive power compensation function, and also it can be realized to rapid dynamic adjustment in the entire power system, such as voltage , impedance,...
Proceedings Article

Research on an Automatic Adjustment Control System for Small Platform Based on the PLC

Honjun Yang, Pan Zhu
Many engineering devices need a platform with high level and position accuracy. An automatic control system is proposed to adjust a small platform that is supported by four height-adjustable legs and two length-adjustable level screws. The control system scheme and working principle are analyzed, then...
Proceedings Article

The controllable synthesis of the hybrid silica monolithic materials with the stable skeleton macroporous structure

GuoChuang Cao, SiYing Wang, Yunkai Lv, XinYing Qin
A new hybrid monolithic column (HMC) was prepared in stainless steel chromatographic column using nitric acid as catalysis and methyltrimethoxysilane as sole precursor. The influences of the precursor ratio, catalyst concentrations, gelation temperatures on properties of HMC were investigated, and the...
Proceedings Article

Mechanism Analytical of furcated split of LEFP

Hongwei Liu, Yong Zhang, Junhong Luo
By theoretical analysis, under the conditions of central point initiating , the article consider that furcated split of LEFP was conducted by of every fault plant, x directional speed grads resulted in LEFP's elongation, y directional speed grads resulted in LEFP's bending distortion, thereby result...
Proceedings Article

Literature Survey of the Research of Blade-Casing Rub-Impact Characteristics on High Speed Rotating Machinery

Huanyong CUI, Huiying ZHAO, Xiuhua MEN
Complicated rubbing issues are often occurred on rotating machinery. Combining with mechanism of transient rub-impact effects of the rotating blade-casing, the development about rubbing problem of rotor dynamics, vibration characteristics of constraints blade and rub-impact problem of the rotating blade-casing...
Proceedings Article

Corn Harvester Cutting Table with Adjustable Spacing

Chong WANG, Shukun CAO, Changzhong WU, Shengnan WANG, Yingying ZHAO
Mechanical harvest of corn can greatly improve the efficiency of harvesting. Corn harvester have to adapt to different regions of China's growing habits, such as different row spacing and plant spacing. The improvement of harvesting efficiency depends on the continuous innovation and improvement of the...