Proceedings of the 5th International Conference on Mechanical Engineering, Materials and Energy (5th ICMEME2016)
154 authors
- Abbas, Laith K
- Transfer matrix method of linear multibody systems for free vibration analysis of beam carrying elastically mounted point masses
- Abbas, Laith K
- Catastrophic/benign flutter boundary evaluation carried for two-dimensional aerodynamic surface in subsonic flow
- Bechkoum, Kemal
- Data-Based Gain-Scheduled Modeling and Nonlinear Control of Engine Intake and Exhaust System
- Cai, Wenjia
- Catastrophic/benign flutter boundary evaluation carried for two-dimensional aerodynamic surface in subsonic flow
- Chen, Dongyang
- Transfer matrix method of linear multibody systems for free vibration analysis of beam carrying elastically mounted point masses
- Chen, Dongyang
- Catastrophic/benign flutter boundary evaluation carried for two-dimensional aerodynamic surface in subsonic flow
- Chen, Jian
- Research on Reliability Calculation Method of Metal V-belt Cvt in Sliding Friction Transmission Condition Based on the Oil Film
- Chen, Lei
- Selecting Training method of a rehabilitation robot Based on fuzzy comprehensive evaluation
- Chen, Liyan
- Trajectory planning of rescue robot based on TRIZ effect
- Chen, Mengjuan
- Design of Tension Control System for Automated Fibre Placement
- Chen, Tangxian
- Graphical Modeling and simulation of the Hydropower Plant Switch
- Chen, Xianshuai
- Design and the Reliability Research of the Restorable Dental Implant System Aiming At the Central Screw Fracture
- Chen, Yang
- Design and the Reliability Research of the Restorable Dental Implant System Aiming At the Central Screw Fracture
- Chen, Yao
- Design of Tension Control System for Automated Fibre Placement
- Chen, Yenchung
- Synthesis and characterization of high concentration Nd3+ doped YAG nanopowders for laser applications
- Chen, Zhiqiang
- Phase transition and phonon characteristics of PbTiO3 single-crystal nanorods prepared in NaCl flux
- Cui, Huanyong
- Analysis of Main Characteristics of Hydro-mechanical Continuously Variable Transmission
- Das, Subrata
- Synthesis and characterization of high concentration Nd3+ doped YAG nanopowders for laser applications
- Deng, Yu
- Phase transition and phonon characteristics of PbTiO3 single-crystal nanorods prepared in NaCl flux
- Dolwichai, Teetut
- Shape Optimization of the Air Compressor Supporting Leg by Using the Optimization Technique
- Dolwichai, Teetut
- Fatigue behavior in the mechanism of the Speed Bumper by using the Finite element method
- Dolwichai, Teetut
- Study of airfoil shape optimization by using the evolutionary method
- Dumlu, Ahmet
- A Robot Application for Fatigue Tests to Estimate Life Time of Metal Parts
- Egwutvongsa, Songwut
- Study and Development of Process Material Fiber Board from Sugar Cane Leaf in Applied Product Design for Sugar Cane from Agriculturist Thai
- Erkayman, Burak
- A Robot Application for Fatigue Tests to Estimate Life Time of Metal Parts
- Fan, Xinqiao
- Design and Development of Generators-Power Grid Dynamic Performance Online Monitoring System Based on WAMS data
- Fan, Yushang
- Optimization of social force model in subway station aisle
- Fang, Jun
- Frequency-dependent friction for non-Newtonian power-law fluid in transient pipe flow
- Feng, Bin
- Optimization Design of Sucker Rod Centralizer Spacing in Straight Hole
- Feng, Wei
- Design and the Reliability Research of the Restorable Dental Implant System Aiming At the Central Screw Fracture
- Feng, Yiqun
- Effect of mechanical vibration on the residual stress of direct laser metal deposition workpiece
- Guo, Tao
- Testing levelness error of long cylindrical guide rail by laser tracker
- Hang, Biyun
- An Approach to Simulate the Manufacturing Process of Thermal Spray Coatings
- Hu, Xinghua
- Analysis of Main Characteristics of Hydro-mechanical Continuously Variable Transmission
- Hua, Dengxin
- Light collection engines with micro compound-eye arrays for pico-projection displays
- Huang, C.Y.
- Mechanical Reliability Analysis of Pneumatic Solenoid Valve Considering Airflow Disorder
- Huang, Hao
- Analysis on shear distribution of composite box-girder with corrugated steel webs under construction phase
- Huang, Wenquan
- Selecting Training method of a rehabilitation robot Based on fuzzy comprehensive evaluation
- Huang, Yuanchao
- Design and Development of Generators-Power Grid Dynamic Performance Online Monitoring System Based on WAMS data
- Jia, Peng
- Frequency-dependent friction for non-Newtonian power-law fluid in transient pipe flow
- Jian, B.S.
- Mechanical Reliability Analysis of Pneumatic Solenoid Valve Considering Airflow Disorder
- Kam, T.Y.
- Mechanical Reliability Analysis of Pneumatic Solenoid Valve Considering Airflow Disorder
- Kang, Xiaoqing
- Analysis Method of Sucker Rod Centralizer Spacing in Three-dimensional Hole
- Kang, Xiaoqing
- Performance Analysis of a Novel Swing Crank- slide Bar Beam Pumping Unit
- Kang, Xiaoqing
- Optimization Design of Sucker Rod Centralizer Spacing in Straight Hole
- Kang, Xiaoqing
- The Research of Metering Well Yield Technology Based on Dynamometer Card
- Lai, Hsuanhan
- Effect of mechanical vibration on the residual stress of direct laser metal deposition workpiece
- Li, Chengyan
- Joint replenishment and delivery problem with fuzzy chance constraint resouce restriction
- Li, Haidong
- Luminescence Properties of Eu3+ ion doped Strontium Borate Phosphate Phosphors
- Li, Ruichuan
- Analysis of Main Characteristics of Hydro-mechanical Continuously Variable Transmission
- Li, Shuqin
- Finite element analysis of the pre-stressed concrete box-girder bridge with corrugated steel webs
- Li, Xiaoyang
- Study on Characteristics of Magnetic Memory Signal of Q345R Steel during the Tensile Process
- Li, Yukun
- Effect of New Material and Production Technoligy Development on Food E-tail
- Lin, Chiming
- Effect of mechanical vibration on the residual stress of direct laser metal deposition workpiece
- Liu, Feng
- An Agricultural Sensor Data Sparse Representation and Recovery Method Based on Redundant Dictionary
- Liu, Hongliang
- Trajectory planning of rescue robot based on TRIZ effect
- Liu, Huichao
- Closed-loop Design and Simulation Analysis for Condenser Pressure Control on Direct Air-cooled Units
- Liu, Jingang
- Research on Reliability Calculation Method of Metal V-belt Cvt in Sliding Friction Transmission Condition Based on the Oil Film
- Liu, Lanjun
- Luminescence Properties of Eu3+ ion doped Strontium Borate Phosphate Phosphors
- Liu, Lei
- Design and the Reliability Research of the Restorable Dental Implant System Aiming At the Central Screw Fracture
- Liu, Xiaoying
- Design and Analysis of power-train system of New Pure Electric City Bus
- Liu, Yucong
- Selecting Training method of a rehabilitation robot Based on fuzzy comprehensive evaluation
- Lu, Chunghsin
- Synthesis and characterization of high concentration Nd3+ doped YAG nanopowders for laser applications
- Lu, Yong
- Testing levelness error of long cylindrical guide rail by laser tracker
- Luo, Tianyi
- Design of Tension Control System for Automated Fibre Placement
- Marzocca, Pier
- Catastrophic/benign flutter boundary evaluation carried for two-dimensional aerodynamic surface in subsonic flow
- Nan, Zhenjiang
- Analysis Method of Sucker Rod Centralizer Spacing in Three-dimensional Hole
- Promdan, Sitthiphong
- Fatigue behavior in the mechanism of the Speed Bumper by using the Finite element method
- Pu, Jun
- Design and Development of Generators-Power Grid Dynamic Performance Online Monitoring System Based on WAMS data
- Rakhadilov, Bauyrzhan
- Producing Ti-Al coatings by mechanical alloying method
- Ren, Tao
- Analysis Method of Sucker Rod Centralizer Spacing in Three-dimensional Hole
- Ren, Tao
- Performance Analysis of a Novel Swing Crank- slide Bar Beam Pumping Unit
- Ren, Tao
- Optimization Design of Sucker Rod Centralizer Spacing in Straight Hole
- Ren, Tao
- The Research of Metering Well Yield Technology Based on Dynamometer Card
- Rui, Xiaoting
- Transfer matrix method of linear multibody systems for free vibration analysis of beam carrying elastically mounted point masses
- Rui, Xiaoting
- Catastrophic/benign flutter boundary evaluation carried for two-dimensional aerodynamic surface in subsonic flow
- Sagdoldina, Zhuldyz
- Producing Ti-Al coatings by mechanical alloying method
- Seviset, Somchai
- Study and Development of Process Material Fiber Board from Sugar Cane Leaf in Applied Product Design for Sugar Cane from Agriculturist Thai
- Shi, Xiuping
- Design and Development of Generators-Power Grid Dynamic Performance Online Monitoring System Based on WAMS data
- Shy, Hsioujeng
- Synthesis and characterization of high concentration Nd3+ doped YAG nanopowders for laser applications
- Skakov, Mazhyn
- Producing Ti-Al coatings by mechanical alloying method
- Som, Sudipta
- Synthesis and characterization of high concentration Nd3+ doped YAG nanopowders for laser applications
- Srisertpol, Jiraphon
- Study of airfoil shape optimization by using the evolutionary method
- Srisiriwat, Nawadee
- Temperature Control of Solid Oxide Fuel Cell System with Coefficient Diagram Method
- Stepanova, Olga
- Producing Ti-Al coatings by mechanical alloying method
- Su, Guohua
- Rotation modulation scheme for the restraint of carrier maneuver and gyro scale factor error
- Su, H.M.
- Mechanical Reliability Analysis of Pneumatic Solenoid Valve Considering Airflow Disorder
- Su, Yan
- Leakage current study for dielectric breakdown in electrowetting systems
- Sun, Cheng
- The Research of Metering Well Yield Technology Based on Dynamometer Card
- Sun, Wen
- Analysis Method of Sucker Rod Centralizer Spacing in Three-dimensional Hole
- Sun, Wen
- Optimization Design of Sucker Rod Centralizer Spacing in Straight Hole
- Sun, Wen
- The Research of Metering Well Yield Technology Based on Dynamometer Card
- Sun, Zegang
- Selecting Training method of a rehabilitation robot Based on fuzzy comprehensive evaluation
- Tan, Feng
- Effect of New Material and Production Technoligy Development on Food E-tail
- Tan, Haidong
- Trajectory planning of rescue robot based on TRIZ effect
- Tang, Wei
- Design and Development of Generators-Power Grid Dynamic Performance Online Monitoring System Based on WAMS data
- Thumthae, Chalothorn
- Study of airfoil shape optimization by using the evolutionary method
- Thumthea, Chalothorn
- Shape Optimization of the Air Compressor Supporting Leg by Using the Optimization Technique
- Tian, Xijie
- Analysis of Main Characteristics of Hydro-mechanical Continuously Variable Transmission
- Traisak, Oranit
- Study of airfoil shape optimization by using the evolutionary method