Proceedings of the 2016 3rd International Conference on Materials Engineering, Manufacturing Technology and Control
Session: Mechanical Engineering and Manufacturing Technology
54 articles
Proceedings Article
Effect on Spiral Bevel Gear Tooth Profile
Hongfang Liu
Machine spiral bevel gear tooth surface will be associated with the machine error in the event of a failure, the mathematical model with the use of the new method of calculation error based on better understanding of spiral bevel gears, the error theory and the law of error flank tooth surfaces calculated....
Proceedings Article
Analysis of Manufacturing Process of Shaft Parts Based on Thermal Spraying
Guodong Wang, Fengfeng Jin
Thermal spray technology is one of the key supporting technologies of remanufacturing engineering, and it is an important technical means to realize the rapid recovery of the surface dimensions of the damaged parts, to improve the performance and prolong the service life. In this paper, the main shaft...
Proceedings Article
Synchronous Optimization Design of Fixture Layout and Clamping Force Based on UG
Fengfeng Jin, Guodong Wang
In order to improve the accuracy and design efficiency of fixture, UG and ADMAS software has been introduced into the fixture design process, and the co-simulation function of software has been applied, and the fixture reasonable layout and the clamping force calculation and synchronous optimization...
Proceedings Article
Effects of intake temperature on performance and operation range of an HCCI engine fueled with n-butanol
Gang Li, Junjian Wang, Chunhua Zhang
To investigate the effects of intake temperature on the performance and operation range of HCCI engine fueled with n-butanol, the 2nd cylinder of a water-cooled, naturally aspirated diesel engine with 2-cylinder was modified to operate on HCCI combustion mode. The indicated mean effective pressure (IMEP),...
Proceedings Article
The virtual design and simulation of gypsum block molding machine
Yang Gao, Yumin He, Baohui Zhu, Wanying Cheng
In this paper, the model-box system and demolding mechanism of gypsum block molding machine are designed using 3D modeling software. Then the movement simulation of gypsum block molding machine is completed. This is helpful to shorten the design period and improve the performance of product.
Proceedings Article
Study on static and dynamic characteristics of metal helical spring
Shengwen Deng, Maoru Chi, Chaotao Liu
In order to study the static and dynamic characteristics of metal helical spring ,a finite element model of the spring was set up by using Ansys, An experiment was designed to validate the result, the results of the experiment and the Ansys proved that the static stiffness of metal helical spring is...
Proceedings Article
The Surface Fine Structure Contact Deformation Mechanics and Experimental Verification
Xingchen Li, Qiang Zhang, Yiyong Huang
In order to realize the high efficient seal performance, according to the model that is completely deformed to contact substrate everywhere between hard substrate and soft substrate in Presson contact mechanics, the complete contact condition is advanced. Two gaskets with micrometer size surface fine...
Proceedings Article
Types and modeling of intercalation in alluvial fan reservoir-A case study of Guantao Formation in the Du 84 Block, Shu-1 area, Western Sag of Liaohe Depression
Yuanchao Zheng, Tailiang Fan, Zhiqian Gao
The Western Depression of the Liaohe Basin is the major exploration area of the Liaohe Oilfield, and the production formation of Guantao in Du84 block of the Shu-1 area contains extra heavy oil with a depth of 530-640m. Steam Assisted Gravity Drainage (SAGD) method had been applied to the development...
Proceedings Article
The Frame Structure Design of three Lifting Point Dummy ROV
Xingwei Guo, Jie Song, Zhenzhong Liu
Research the depth of 3000m Work-Class ROV as mock object and develop a ROV for land test. This device is set three lifting point in the top. The rope connecting the front two lifting point is fixed, the rope connecting the rear lifting point change the length by motor. All of those lifting point are...
Proceedings Article
The design of dummy ROV electric-drive seven functions manipulator
Zaiyu Chen, Meina Guo, Zhenzhong Liu, Lianyu Zhao
With the deepening of the Marine development, underwater constructing often need to use the ROV. In order to verify the construction scheme, ensuring construction efficiency, the staff will use ROV or Dummy ROV on land to simulate construction. As the main body of the ROV, the manipulator is the execution...
Proceedings Article
A New Security Reinforcement Technology of Mobile Application
Chao Zhou, Yajuan Guo, Wei Huang, Jing Guo, Haitao Jiang
Android platform has gradually become the most popular mobile terminal operating system, while the number of software applications based on which is also quite amazing. At the same time, the security threats are also increasing, and the degree of threat is gradually deepening. Therefore, we need to create...
Proceedings Article
Vibration Control Research for Four Edges Simply Supported Rectangular Thin Plate
Hailin Guo, Shouzhu Hu, Guoxing Zhu, Fei Song, Changli Liu
In this paper, the vibration of power machinery on the deck which is simplified to forced vibration of four edges simply supported rectangular thin plate was studied. The theoretical model of the system is built based on the vibration properties of deck using four-pole parameters method. For analyzing...
Proceedings Article
Research on Identification of the Crack on Rotor Shaft
Shouzhu Hu, Hailin Guo, Fei Song, Guoxing Zhu, Changli Liu
In the present research the crack identification in rotor systems is proposed based on Holospectrum. The purpose of the research is to detect not only the crack location on a rotor shaft, but also the crack type and the angle between two cracks on a rotor shaft. 3D Holospectrum is introduced to detect...
Proceedings Article
Virtual Reality Technology Application in motion simulation of Roofbolter
Fan Yang, Sicong Yuan, Xiangkui Jiang
Aiming at the virtual movement emulation's design scheme of the jumbolter , the jumbolter's digital model is built by the 3D modeling software PRO/E5.0,the research combined the jumbolter with virtual reality technology. Jumbolter simulation virtual environment was simulated by means of 3 dimentional...
Proceedings Article
Investigation on the Flow Structures in the Tip Region for a Transonic Axial Compressor Rotor
Tianye Ji, Xie Fang, Youjun Wang, Tao Yi
The effect of flow structures in the tip region on the stability of NASA Rotor 37 has been examined with numerical simulation. Stall inception mechanism of Rotor 37 is presented firstly with principal focus on the tip leakage flow behavior, passage shock wave and leakage flow vortex. Detailed survey...
Proceedings Article
Research and analysis of residual stress measurement of ram casting in gantry machine center
Rong Wang, Xinmeng Sui, Deqiang Wei
Ram is one of the key component of high-end CNC machine tools, which casting residual stress will affect its machining accuracy, quality and performance of machine seriously. This paperutilizing blind hole method to measure residual stress of ram cast-ing,the results show that: the screw mounting face...
Proceedings Article
The simulation and analysis of effect of vacuum eutectic welding parameters on void fraction of solder joint
Tiansheng Pang, Zhaohua Wu
The vacuum eutectic solder joint is widely used in the advantages of large thermal conductivity, small thermal resistance and so on. But the void ratio of vacuum eutectic solder has a great influence on the thermal conductivity, and the smaller the void ratio is, the greater the thermal conductivity...
Proceedings Article
Analysis of thermal environment of Existing Residential Building Envelope Energy-saving in ECOTECT simulation
Suxian Zhang, Bo Feng
Currently existing residential buildings energy-saving are include two ways: reform of building envelope and reform of building heat metering system. The study of building envelope energy-saving technical measures includes: wall insulation, window glazing, roofing insulation, However energy-saving for...
Proceedings Article
Structural Design of Nozzle Based on Hybrid Laser/Water-jet Scribing Technology
Yuhong Long, Tanggao Feng, Jiading Bao, Youqun Tong
In order to research the effect of nozzle geometric parameters on the jet flow performance in processing a thin and sensitive material. A design of two nozzles with different structure has been proposed for hybrid laser/water-jet scribing technology. In this paper, computational fluid dynamics (CFD)...
Proceedings Article
Research of the influence of propeller root on the aerodynamic characteristics of propeller
Yuan-Qiang Liu, Song Xiang, Gang Tong
In this paper the wind tunnel test is used to analyze the effect of root chord of propeller on aerodynamic performance. There were two distributions of the chord near hub of propeller, all parameters are same except the maximum chord. Two models are respectively made of carbon fiber and beech. From the...
Proceedings Article
The development of urban rail vehicle bogie virtual maintenance system
Cang Song
According to structural characteristics and repair process of Urban Mass Transit Train bogies, A method of designing of virtual overhaul Teaching System is put forward combining 3D bogie modeling, virtual scene created and Human-Computer Interaction technology, that is Pro/E as a tool for 3d assembly...
Proceedings Article
Research on the model of creative flat folding table
Yanbo Wang
In the subject one, we firstly number the legs of the table. According to the Pythagorean theorem, we can calculate the length of the table legs. Then describe the dynamic folding process of table by the change condition of angle between table leg and the ground, also we can understand the change of...
Proceedings Article
The Research on the 180°Upender Motion and Mechanics Of Nuclear Large Pieces
Dengyue Sun, Peng Chen, Shiming Xu, Hailong Li
The attitude displacement process of nuclear power large piecesis time-consuming and very dangerous, which has became one of the important factors for improving productivity and enhancing the workpiece's surface quality.However, the research and development of upenders for nuclear power large parts is...
Proceedings Article
Change in Heart Rate Variability Indexes due to high driving workload in turning left at the intersection in real road environment
Weiwei Guo, Xiaoting Tian, Jiyuan Tan, Li Wang
The paper intends to investigate the changes of Heart Rate Variability (HRV) indexes of healthy drivers while driving on a real urban road environment in order to excavate the variation of drivers' driving workload when turning left. Electrocardiograph (ECG) was recorded continuously while drivers driving...
Proceedings Article
Improving Recovery of Narrow Channel Oilfield with Applications of Borehole-seism Integration Technique
Guanghui Sheng
In block A channel sand bodies spread in small scale; the drilling rate is low; level of well control is low; under the current condition of well pattern, the accuracy sand body prediction is low; the accuracy of fault recognition is low; the injection and production relationship of single sand body...
Proceedings Article
Finite Element Analysis and Structure Design of Sub-soiling Shovel
Long Gao, Shanshan Li, Jiangtao Liu, Degang Kong, Jinggang Yi
The 3D parameterized model of sub-soiling shovel was created using Creo Parametric 2.0 in accordance with material object. According to structures, materials, loads and stress situation of sub-soiling shovel, the static analysis and modal analysis of the model are carried out by using ANSYS Workbench14.0....
Proceedings Article
Performance Degradation Research of Combined Rotor Considering Rod Relaxation
Ailun Wang, Zhen Luo
Considering that we have less knowledge of performance degradation mechanism of combined rotor, performance degradation characteristics of combined rotor were discussed, from the perspective of system performance degradation caused by structural damage. Firstly, dynamic features of combined rotor was...
Proceedings Article
Stress Analysis of Double Row Anti-slide Pile
Hao Tang
Double row pile as a retaining structure in slope reinforcement and foundation pit support engineering and many other neighborhoods, it has a wide application. But due to the complexity and difference of the soil around the pile, the interaction mechanism between pile and soil is not clear. Calculated...
Proceedings Article
Calculation of high speed water column pressure on the inner barrel in the gun water-projectile test based on CFD
Zefeng Zhang, Jianping Fu, Yingxiu Cao
It is hard to get the pressure of high speed water column on the inner barrel through the gun water-projectile test. In order to optimize the design, the calculation model of the pressure in the body tube is established. Two dimensional numerical simulation was carried out for gun water-projectile test's...
Proceedings Article
Design and Implementation Fast Correction Phase System of Ship-borne Dynamic Platform
Ren-long Li, Guang-zhi Wu, Ming-xin Kou
The traditional calibration phase just can meet the he static tower condition at pier, but can not use for the dynamic target. The Fast Correction Phase model is built for Ship-borne Dynamic Platform of tracking and control radar. The anti-cosine method is put forward to calculate phase difference. Then...
Proceedings Article
The Effect of Dwell Time to Creep-Fatigue Crack Growth
Wen Li, Guobin Zhang, Xiaohong Yang, Yan Jiao
In engineering application a quantitative description of both fatigue and creep damage mechanisms is demanded for high-temperature alloy. The present work employs the cohesive zone model to numerically simulate the crack propagation in a nickel-based super-alloy. Effect of loading hold period is discussed....
Proceedings Article
Vibro-acoustic response of FGM plates considering the thermal effects
Tieliang Yang, Qibai Huang
In this paper, the vibro-acoustic response of functionally graded materials (FGM) plates subjected to thermal environment are investigated analytically. The governing equations of the FGM plate subjected to thermal environment are derived based on the classic plate theory through Hamilton's principle....
Proceedings Article
Study on the Simulation of AC Permanent Magnet Synchronous Motor Servo System
Caihong Zhu, Hongtao Zhang, Yongjian Zhao
Based on the analysis of theories of vector control, the simulation model of permanent magnet AC servo system built on MATLAB/SIMULINK is designed and studied, the simulation results prove the validity of the simulation model.
Proceedings Article
New Technology Foresight Method: Extenics, Extension Engineering method and Technology ----Second Creation
Zhao Liu, Mei Zhang, Xia Xu
With the speed of the development of science and technology speeds up unceasingly, the traditional technology forecasting often limited the price of large, long cycle. This paper proposes a new subject to carry out technology foresight and industrial path planning research---extenics. Extension through...
Proceedings Article
Effects of blockage of the impeller channel on performances of non-overload centrifugal pump
Wanfang Zhao
The shaft power curve of low specific-speed centrifugal pump is a steep rise with the increase of flow rate. The blockage of the impeller channel can reduce effectively the shaft power of low specific-speed centrifugal pump, and achieve pump's non-overload characteristics. In this paper, the flow channel...
Proceedings Article
Reliability analysis of the Dual Mass Flywheel damping flange based on Workbench
Zhengfeng Yan, Kunpeng Zhou, Chunfang Liao
This article presents reliability analysis of damping flange from dual mass flywheel. In this paper, workbench software was used to analyze the reliability of the dual mass flywheel damping flange. First, the mechanical model of the damping flange was built based on the dual mass flywheel's force transmission...
Proceedings Article
The Present Situation and Countermeasures of Building Electrical Equipment Installation and Debugging
Guanghui Liu
In the process of building electrical equipment installation, if there is a certain problem, it not only affects the construction quality of power supply, but also affects the construction safety. This paper puts forward corresponding countermeasures aiming at building electrical equipment installation...
Proceedings Article
Research on Machine Vision Detection Experiment Platform for Industry Products
Peng Ye, Xingyu Gao
Key technologies of machine vision detection system for the industrial part are investigated and an intact set of high-speed detection system is developed. On the basis of introducing the entire design of machine vision platform, analyzing the software and hardware structure and fundamental principles...
Proceedings Article
Green design and its application in product design
Wei Chen
On the basis of the discussion of green design, the characteristics of green product are analyzed. Pointed out that the green design is the need of sustainable development of human society, is the necessity of sustainable development. In order to make the social and economic sustainable development,...
Proceedings Article
Single-neuron Control Strategy of Engineering Mechanical Arm Hydraulic Drive System
Zhong Liu, Neng Yang, Zhan-Wei Gao
The working environment of engineering mechanical arm hydraulic drive system is complex. The response indicators of the hydraulic drive system need a higher requirement. The conventional PID control method is limited to the complexity and imprecision of the mathematical model of the hydraulic drive system,...
Proceedings Article
Study on Rigid-Flexible Coupling Dynamic Model of Globoid Cam Indexing Mechanism with Six Degrees of Freedom
Zhenghao Ge, Chen Liang, Chengping Li
Aiming at cam indexing mechanism, this paper, considering the influence of elastic deformation, bending and twisting factors, combining the knowledge of rigid-flexible coupling Dynamic System, established the rigid-flexible coupling dynamic model of globoid cam indexing mechanism with six degrees of...
Proceedings Article
Design and analysis of two-shaft omnibearing scanning mechanism
Hua Cai, Zhongrui Wang, Haocheng Wang, Wei Zheng, Wangqi Zhao, Yong Hu
A two-shaft omnibearing scanning mechanism was designed as carrying device for full polarized microwave radiometer, and the 3D model of two-shaft omnibearing scanning mechanism established in CATIA environment was imported into ANSYS finite element analysis software to establish a finite element model...
Proceedings Article
Construction Safety Problem Analysis in Building Structure Design
Jinhai Zhu
ith the rapid development of construction industry, construction quality and safety problems are becoming more and more serious. Building structure design is related with the quality and security of the building. How to improve building structure design safety has become the focus of people. This paper...
Proceedings Article
Three-dimensional FE simulation of cold precision forging of helical gear with the flow relief-hole method
Wei Feng, Dejun Qi, Feng Wang, Fei Qin
In the present study, billet is designed by utilizing the flow relief-hole principle to improve the dimensional accuracy during the cold precision forging of helical gear. A three-dimensional FE simulation was carried out to analyze the deformation features of billet with different initial diameter of...
Proceedings Article
"Three Preventions" System Design Based On Single-Chip Microcomputer (SCM)Control
Jiaxiong Wen
With the rapid development of social economy, Science and technology level are increasingly improving, especially accelerated pace of life, People demand for fireproof, anti-theft and anti-gas equipment is greatly increased, and for theft, fire and other accident monitoring and alarm system requirements...
Proceedings Article
Study and Application of Harmonic movement of the Cam mechanism
Zheng-hao Ge, Kai Zhang, Jiao-juan Shen, Xiao-yu Han
This paper introduces a kind of the harmonic motion curves, which characterized by multi-harmonic component, and the expression form can be divided into two cases: general Cam mechanism and indexing Cam mechanism. Combined with the instance, it compares the characteristic values with other commonly motion...
Proceedings Article
Experimental Study on Dry Electrostatic Cooling in Turning
Hui Wang, Xiulin Ji, Fusheng Ni
In recent years, environmental concerns call for the reduced of cutting fluids in metal machining. The green manufacturing techniques are investigated to achieve the objective. In this paper, for the aim of green cutting, the dry electrostatic cooling was applied instead of cutting fluid. The effects...
Proceedings Article
The Design of Cutting Force Calculation System for Orthogonal Experiment
Xuebin Liu, Xibin Wang, Chongning Li
Based on the design of orthogonal cutting tests, study the processing and the analysis method of orthogonal test data, program the module for solving regression equation, research on the calculation of cutting force curve, drawing and display issues based on the cutting test data which is stored cutting...
Proceedings Article
Design and implementation of Technology Service Platform of Industry Clusters in Engineering Machinery based on SOA
Qiufeng Wang, Jie Fu, Haiming Zhao, Xuanhua Xu
To solve the problem of "Information Island", namely, the condition when the data can not be shared in the process of industry clustering, and wasted resources in Engineering Machinery industry clusters. An implementation method of technology service platform of industry cluster in engineering machinery...
Proceedings Article
The design and obstacle-overcoming analysis of multiphase connecting- rod wheeled robot
Chen-yang Shen, Yu-jun Wang, Can Fang, Peng-fei Yin, Jie Huang
This article is mainly aimed at the solving the problem of singularity phenomenon which exists in the connecting-rod wheeled robot. We propose a multiphase connecting-rod wheeled robot based on multiphase connecting-rod structure and analyze the design principle and obstacle-overcoming ability of the...
Proceedings Article
Design on Wrist and Gripper of manipulator Based on Kinematics Analysis
Huaizhi Zong, Shigui Xiang, Xiang Li, Lida Zhu
Joint-manipulator installed on the intelligent wheelchair robot decides the whole system capability. The kinematics analysis and structure design about mechanical wrist and gripper for joint-manipulator are discussed in this paper. Based on the D-H coordinate method, the kinematic equation of joint-manipulator...
Proceedings Article
Study on Electrical Performance of FC and WB in IC Ceramic Package
Dejing Wang, Yuanfu Zhao, Quanbin Yao, Yusheng Cao, Binhao Lian, Hongshuo Zhang
As the signal frequency of integrated circuit keeps increasing, parasitic effects caused by the interconnect transmission structure used in IC ceramic package is becoming important factor which will influence the transmission performance of the signal path. In this paper, parasitic parameters (Resistance,...
Proceedings Article
Rolling Bearing Fault Diagnosis Based on SR and BITD
Xianyou Zhong, Jiaming Zhao, Li Zhang, Meibao Peng
An approach of fault diagnosis of rolling bearing based on B-spline Intrinsic Time-scale Decomposition (BITD) and Stochastic Resonance (SR) was presented. Firstly, SR was used to reduce the noise of the rolling bearing vibration signal, then the bearing vibration signal was decomposed into several Proper...
Proceedings Article
Finite Element Analysis Elastic Deformation of Roll System for Cold Rolled Copper Belt
Weiqin Shao, Xiaobo Liu, Faqiang Feng
According to the characteristics of copper belt's rolling process, the roll system's elastic deformation model of Sendzimir twenty roll mill is established, the contact normal stress between the rolls is calculated by using the ABAQUS software and the influence factors of the contact normal stress between...