in recent years, product design concept has extended and expanded continuously. People's attention to low carbon concept improves gradually. In particular, the concept of low carbon and environmental protection starts to fuse in product design so as to improve environmental protection idea of products,...

In order to resolve the resonance problem of jack-up riser with drill string, the frequency equation of natural transverse vibration with compressive axial load and the length of the riser above the seabed as independent variable was derived in this paper. Then the frequency equation was solved by the...

Magnesium alloy has the great advantage of aluminum compared to other light alloy materials, so magnesium alloy is being carried out step by step in automotive applications and attracted attention of the automobile industry because of superior characteristics of recirculation replace previous material...

Vacuum tube is working in a very harsh conditions, a high requirement for structural reliability has to be put forward. The research method of structural dynamic characteristics analysis was discussed in this paper, and the method combined finite element simulation and random vibration test is used to...

In order to decrease the vibration of aircraft hydraulic pipeline, the vibration control techniques are studied from two aspects, i.e. suppression of the vibrating source and installation of dynamic vibration absorber. In this paper, the methods of increasing the length of the tubular joint and reduce...

In high-speed train, the harmonics generated in invertor due to control and nonlinear of switch may lead to the torque ripple in different frequency and amplitude. The driving device which consists of rotor, coupling, gear, shift and wheels of bogie has some resonance frequencies. When there are frequencies...

In high-speed train, since parts of driving medium are not fully rigid, it is common to have fluctuation of rotating speed in different sizes and phase leading to shaft torsional vibration in driving devices for kinds of reasons. Slight vibration can change the torsional stress on axis, which aggravate...

Multi-scale bistable array (MSBA), which combines normalized scale transform, stochastic resonance effect driven by colored noise and parallel array, can be applied to weak signal detection under heavy noise. The experimental application in incipient fault feature detection of rolling element bearing...

Through the analysis of surface defect characteristic about mechanical parts, a new method of based on target feature was presented to surface defect detection of mechanical parts. First of all, the test image is processed by mean-filter in order to eliminate the effect of noise on the detection. Secondly,...

In order to obtain the optimal values of cable force, and determine the reasonable finished bridge state for large span Cable-stayed bridge with hybrid girder, the space finite element simulation analysis model of the whole bridge is established, considering the characteristics of its span arrangement...

Chaotic motions of a Rayleigh-Duffing oscillator with periodically external and parametric excitations are investigated rigorously. Chaos arising from intersections of homoclinic orbits is analyzed with the Melnikov method. The critical curves separating the chaotic and non-chaotic regions are obtained....

With the development of economy and technology, the new technology, new methods and new equipment are used in the construction of overhead transmission line. Currently, the part of the construction organizations lack cognition to this kind of new technology and new methods. Instead of, they rely more...

With the improvement of mechanical construction level of China, the organization planning of construction equipment in the mechanical construction is more and more important, while the construction organization measures of mechanized construction for transmission line are lacks of related research at...

The falling of wear layer on the surface of roller is a main form of roller failure. Based on the typical structure of normal roller and bionic coupling theory of structure and material, a coupling roller with strips on the surface of damping layer is designed. To study the mechanical property of the...

More than 80 percentages of high-speed sealed angular-contact ball bearings are lubricated by grease. The grease filling amount has a great influence on bearing performance and service life. The static space ratio s and movement space ratio d were analyzed and calculated in this paper. Bearing temperature...

The traction behavior of a special grease was tested on a self-made test-bed. The experiment were performed as close to the actual working conditions of the bearings, and then the traction curves were analyzed. The performances and applicability of T-J model and a kind of exponential model with four...

The RN wind turbine bearings are difficult to machine as they are large and heavy. Thus the analysis of inner diameter hard grinding process is necessary. In this paper, the parameters related to machining quality were studied based on the grinding principle and experiments, and the optimized machining...

In this paper ,the research object is the double friction drawing reel of winch which the rated load is 50kN. We identified the main parameters of the double friction drawing reel, includes the bottom diameter of reel , the type of groove, the pitch of groove, the depth of groove, the radius of groove...

The regularity of the through-feed superfinishing of the taper roller is considered, the radial contact arc length between a oilstone and a roller is calculated, the model of superfinishing dynamic valid cutting edge numbers is built, the influence of key parameters to radial contact arc length and dynamic...

Based on stringing construction of the conductor in power transmission engineering construction, Shanghai Power Transmission and Transformation Engineering Company designed the double rails propelle type crossing frame, which was used to protect the important crossed objects. Before the crossing frame...

Based on the principle of human factors engineering, the relevant data of the users including the babies and the caregivers are analyzed to provide parameters for mechanical structural design. The designed adjustable baby carriage/walker features novel multifunctional and is suitable for the babies in...

PTFE/aramid woven fiber liners were modified by acrylamide, phosphate ester coupling agent, respectively. The effects of the modified liner on the friction coefficient, the wear loss and the friction temperature of self-lubricating spherical plain bearings were investigated by using self-made compound...

In this paper, effect of frequency on multi-axial fretting fatigue damage behavior of Al-Zn-Mg alloys is studied. Point contact fretting fatigue tests are used to research effect of frequency on multi-axial fretting fatigue lives, fretting wear area and fracture appearance. Based on experimental results...

Digital Electro Hydraulic (DEH) control System, a key element including the nonlinear aspects, is an important control component of the steam turbine control system. The changes in parameters of DEH affect greatly on dynamic characteristics and quality of electricity produced by steam turbine. This paper...

As the actual take-off weight of the aircraft is less than the maximum take-off weight, the technology utilizing thrust less than maximum take-off thrust for take-off is called reduced thrust take-off. Reduced thrust take-off is in generally divided into Assumed Temperature and Derate Method. In this...

To improve the problem of delayed voltage recovery after fault, a dynamic voltage/var sensitivity model based on integral mapping is set up and a generator excitation control strategy based on WAMS is presented in this paper. It provides voltage supporting after voltage drop through increasing the reactive...

The trace tracking control for quadrotor aircraft with system uncertainties and constraints for output tracking error is addressed. Uncertainties in quadrotor system is estimated by utilizing linear extended state observer. In addition, the backstepping method using barrier Lyapunov function is designed...

Electromechanical integrated toroidal drive is a new-style composite drive, it integrates power and drive function. The mathematic models in coordinate system of the drive were derived based on the operating principle of the drive. In order to improve the controllability of toroidal drive, a vector control...

Structure symmetry is a common phenomenon in mechanical product structure, which plays important roles in realizing the design demands of mechanical product. This article using the method of multidimensional fuzzy association rules mining to mine design knowledge from the instance database, the mining...

Caused by the manufacturing process and equipment, dimensional deviations occur in the anchor chain and lead to asymmetry. In order to evaluate the stress in asymmetric chain, this paper uses finite element method (FEM) to model the 76mm asymmetric stud anchor chain and calculate the stress distribution...

A numerical code was developed to investigate the characteristics of drag and heat reduction by the lateral jet in supersonic flows, the Reynolds-average Navier-Stokes (RANS) equations was solved by using high resolution upwind scheme AUSMPW+, three order MUSCL reconstruction method and k- SST turbulence...

Special aircraft cabin layout optimization design was treated as an NP-complete (nondeterministic Polynomial time complete) problem. The empirical design was incapable to meet the developing requirement of the display and control system in modern aircraft cabin. After analysis of three typical cabin...

the article firstly introduces two main high-speed locomotive vehicle semi-active control strategy, and aims at SH-ADD a new hybrid semi-active control strategy are discussed in this paper From the point of the research results of the example analysis, the SH-ADD hybrid semi-active control strategy has...

A robot is a positioning control can be automated and can be reprogrammed to change the multifunctional machine, occupies an important position in the industrial automation production. Hydraulic drive system can be pneumatic drive, it may be electrical control and other methods. With sensor technology,...

This paper realizes the localization method base on the SVO (Semi-Direct Visual Odometry) and IMU (Inertial Measurement Unit) without GPS. According to this novel visual estimation method, the position and orientation are estimated by the MSF (Multi Sensor Fusion) with EKF (Extended Kalman Filter). In...

The majority of heavy oil block has entered a phase of high-throughput round in China, mining results have clearly deteriorated, The natural reservoir has been a marked lack of energy, resulting in reduced cycle of oil production, oil and gas than the lower mining costs, economic deterioration. The research...