Proceedings of the 2016 International Conference on Mechanics, Materials and Structural Engineering

Session: Advanced materials and properties analysis of mechanics engineering

25 articles
Proceedings Article

PEG-assisted hydrothermal synthesis of VO2(A) nanowires with remarkable optical switching properties

Xiangli Liu, Weiming Xiong, Yue Zheng
High quality single crystalline VO2(A) nanowires were synthesized by a facile hydrothermal method using oxalic acid as reducing agent and polyethylene glycol 6000 as surfactant. It was found that polyethylene glycol 6000 can effectively accelerate the transformation from V2O5 precursor to VO2(B), and...
Proceedings Article

Research on Tea Processing Technology and Mechanical Motion Mechanism for Fried Tea Machine

Haiwei Xu, Jiangwen Tang, Jiangping Cao
Traditional way of tea processing have staff labor intensity, low efficiency, high cost, product quality is not standardized, and mechanical processing instead of manual tea with tea very good to solve the above shortcomings, this article from mechanical processing technology of tea, Analyze tea frying...
Proceedings Article

A Method of Force Output Test for a Low Thrust High Precision Flat Space Electromagnetism Actuator

Chengchen Deng Chengchen Deng, Min Zhu Min Zhu, Hongbo Zhao, Liao He
Future satellites require higher and higher payload’s pointing precision and attitude stability, it is urgent to suppress micro vibration efficiently. This article designs a low thrust, high precision flat electromagnetism actuator. Firstly, the article designs the configuration of the actuator .Secondly,...
Proceedings Article

Wear Behavior of Basalt Powder Reinforced Phenolic Resin Matrix Composites Brake Lining Pads

K.T. Adi Atmika, Wayan Nata Setiadi, M.D. Parwata
This paper explain the wear behaviour of composites phenolic resin with basalt powder reinforced on brake lining pads. Composite brake has been manufactured use compaction and sintering steps. The research aims to investigate wear characteristic of composite that tested using the Pin-on-disk according...
Proceedings Article

Load Distribution Calculation of Flexible Ball Bearing with Elliptical Cam Wave Generator

Bindi You, Jianmin Wen
Flexible ball bearing is used as a component in wave generator of a harmonic drive gear system. During the revolution of the flexible bearing, the races of the bearing are subjected to elastic deformation by the shape of the elliptical cam. Thus, a reasonable mechanical model is established based on...
Proceedings Article

First-principles calculations of second-order elastic constants and generalized-stacking-fault energy for GaAs

Yunchang Fu, Huili Zhang, Chun Zhang, Chunhua Zeng
The second-order elastic constants and generalized-stacking-fault energy surfaces for semiconductors GaAs have been predicted by using the first-principles calculations. The calculations employ the density functional theory within local-density-approximation method. The lattice constants of GaAs is 5.626Å,...
Proceedings Article

The Controlling Factors of CBM Accumulation and Favorable Exploration areas in Eastern Junggar Basin, Xinjiang

Dazhen Tang, Jingjing Li, Tingxu Yu, Wuquan Zhu, Pengfei Ren, J.J. Li
The information of coal-bed distribution, rank and gas-bearing nature of Jurassic coals in eastern Junggar basin were analyzed, and the controlling factors of coal-bed methane (CBM) accumulation were pointed out, which were coal rank, coal seam depth, and preservation conditions. The most important factor...
Proceedings Article

Examination of Industrial Design of Product Based on Combination of Interaction Analysis and TRIZ Tool -Take Example of Rescue Engineering Machinery

Jianjun Liu
The environment after disasters is abominable and complicated. By increasing the wide adaptability of rescue machine to make it operate more quickly and flexibly and increase the efficiency of rescue operation. Based on investigating and analysis of the features of specific environment and functions...
Proceedings Article

Structure design and Simulation of Plug-seedling gripping device

Lifang Cao, Chuangchuang Zhang
Transplanting of plug-seedling is an important method for seedling transplanting. Considering the problems existing in the transplanting of plug-seedling, a new plug-seedling gripping device based on mechanical finger was designed using Solidworks in this paper. The device controlled the rotation and...
Proceedings Article

Comparison on hysteresis movement in accordance with the frictional coefficient and initial angle of clutch diaphragm spring

Sung-mo Yang, Hyang-woo Kim
Clutch system influences the clutch pedal force of an operator in accordance with the characteristics of each part. Hence, the purposes of this study are to establish a mathematical model on the diaphragm spring of clutch cover and to identify the basic characteristics for each mathematical model. Also...
Proceedings Article

Design of Metallic Phase Diagram Determinator Based on Electromagnetic Heating Technology

Yun Ren, Peng-tao  Xie  
A novel kind of metallic phase diagram determinator has been developed in order to deal with the problem of original determinator big thermal inertia and bad temperature control. Which is used by the electromagnetic heating technology. The determinator has many functions such as temperature setting,...
Proceedings Article

Potential lignin degraders isolated from the gut of rhynchophorus ferrugineus

Sari Mohd Kassim Angzzas, Mohd Aripin Ashuvila, Norul Fairuz Abang Zaidel  Dayang
In industrial processes large amount of cost and pollution produced are derived from the process of removing lignin (delignification) to make high-quality paper through the chemical pulping process. Rynchophorus ferrugineus are wood-feeding insect that have the capacity to degrade wide range of lignocellulosic...
Proceedings Article

The Effects of Newly Formulated Filter Aids Material Loading on Pressure Drop and Particle Penetration

S. Hajar, A. Nurnadia, M. R. Ammar
Filter aids have been widely used in air filtration system in order to fulfill the needs to expand the lifespan of the fabric filter as well as to improve the collection efficiency of particles during filtration and separation operations. The efficiencies of PrekotAC that consists of a different combination...
Proceedings Article

Optimization of Horizontal Current in Metal Pad by using Slotted Cathode and Heightened Collector Bars

Yuqing Feng
According to the problem that horizontal current in the metal pad of aluminum reduction cell induces waves of the electrolyte-metal interface, this paper reports on assessments of the horizontal current elimination effects by using slotted cathode and heightened collector bar as well as their combination....
Proceedings Article

Semi-active fuzzy control for machine tool vibration

Weina Liu
Intelligent material is widely used in the semi-active vibration control systems due to its the advantages as simple control, responding quickly, easy control of characteristic parameters, low power consumption and strong robustness. In this paper, the damping device for machine tool based on intelligent...
Proceedings Article

Crashworthiness characteristics on the Optimal Design of circular stepped tube subjected to axial impact

M.M. AbdElwahab
Crashworthiness design draws considerable attention and interest in energy absorption systems. An optimal design of circular stepped tubes based on free inversion is presented in the current work to improve and enhance the crashworthiness characteristics under axial impact loading. Circular tubes have...
Proceedings Article

Mathematical modeling and design considerations for designing voice coil motor

M.H. Kim, J.H. Park, D.G. Gweon
The voice coil motor is a device motivated by electric current. It is creating force by Lorentz force principle generated by interaction of the current and magnetic field from magnets. The voice coil motor has been used for various purpose such as speaker, actuator, and etc. Especially, there has been...
Proceedings Article

Key factors affecting BIM adoption is China based on TOE&RC

Guangbin Wang, Zhenwei Liu, Hanchao Wang
In recent years, research on BIM standards, practical application and barriers have been made certain progress by researchers and practitioners, but research on the key factors that affecting whether companies to adopt BIM or not are rare. Within the TOE&RC framework which is based on TOE framework,...
Proceedings Article

Capacity Model Research of Aluminum Conductor Composite Core(ACCC) Conductor

Li Qin, Guangyu Zhou
As the rapid development of economy and electricity, it is particularly important to research about improving the exiting transmission capacity of transmission lion on the premise of safety. Compared with conventional conductor, ACCC conductor has low sag, high current carrying capacity, but the design...
Proceedings Article

Measurement and analysis of visual physical magnitude of electroless copper-plated veneers

Lili Sun
The copper-plated veneers made in short process pretreated with NaBH4 are used as the test pieces to measure and analyze the color and glossiness of electroless copper-plated birch and fraxinus mandschurica veneers before and after the coating with the spectral colorimeter and the digital glossmeter...
Proceedings Article

Comparison of clutch hysteresis characteristics depending on the pedaling time and the compressed air

Sung-mo Yang, Hyang-woo Kim
In this paper, we compared, through experiments, the hysteresis characteristics in the load of the push rod, that is generated in the booster cylinder according to the time of the instantaneous actions made by the driver in stepping on and releasing the clutch pedal. In addition, we performed separated...
Proceedings Article

MFC aerogel-Fe3O4 composite

Guobing Kang, Renmei Xu
MFC aerogel was prepared, magnetic nanoparticles (MNPs) were loaded in the aerogel. MNPS were obtained successfully in the matrices without adding any other binders. The aerogel MNPS size was defined by TEM. The thermal-stability was marked by TGA. XRD was examined to define the particles of Fe3O4. This...
Proceedings Article

The Optical Properties Test on Shading Fabric

Yue Peng
In order to study the heat insulation and indoor light adjusting ability of fabric, the optical properties of usual shading fabric were tested using spectrophotometer which measurement range is 190nm~3300nm. Under different open porosity, the ultraviolet transmittance, solar direct transmittance, solar...
Proceedings Article

Crystallization Kinetics in Ge-Sb-Te-Bi and Ge-Sb-Te-In Thin Films

Sherchenkov Alexey, Lazarenko Petr, Timoshenkov Sergey, Kozyukhin Sergey
In this work mechanism and kinetics of crystallization for thin films on the basis of Ge-Sb-Te-Bi and Ge-Sb-Te-In perspective for phase change memory application were investigated. Possible data processing and storage times of the PCM cell were estimated. It was shown that PCM cell based on Ge2Sb2Te5+0.5...
Proceedings Article

A wholegrain level dry separation system for thermal coal sorting Analysis

Jinbo Zhu, Erning Zhao
This paper presents a dry separation system for thermal coal sorting in which the major grading equipment don't need to water, to avoid the shortage of the traditional wet separation process along with the complex slime water treatment systems, simplifying the process, and reducing the costs, meeting...