Proceedings of the 5th UPI International Conference on Technical and Vocational Education and Training (ICTVET 2018)

+ Advanced search
127 articles
Proceedings Article

Performance Assessment Student with Special Needs. Indonesian Sambal Competence in Inclusive Vocational School

Asep Maosul, Ana Ana, Ai Nurhayati, Rita Patriasih
Learning outcomes assessment system for students with special needs in Indonesia has been equated with students without other special needs, Assessment of children with special needs in developed countries is carried out thoroughly adjusted to the uniqueness of students, Vocational Teachers culinary...
Proceedings Article

Students Learning Difficulties and Saturation in Achieving Competency

Tetty Setiawaty, Gunadi Tjahjono
This study has the main purpose of describing the difficulty and saturation of student learning in achieving competency. The type of research used is quantitative, using quantitative and mean descriptive analysis. The results showed: 1) Student learning problems are grouped into three, which are: learning...
Proceedings Article

Work Ethics as Sub-component Forming of Basic Competency of the Electrical Energy Engineering Skill Program in Vocational High School Students

Gunadi Tjahjono, Tetty Setiawaty
The purpose of this study is to identify the work ethic as a sub-component forming basic competencies Vocational High School (SMK) on the competencies of Power Transmission Engineering skill. This study employed the method of DACUM analysis and Delphi technique. The subject of research is the labour...
Proceedings Article

The Effect of Project-based Learning and Creativity on the Students’ Competence at Vocational High Schools

Usmeldi Usmeldi
The preliminary surveys show that many students are less creative, so that it difficult to understand the concept of physics. Many students who do not mastery learning of physics so that it difficult to applied the concept of physics in relevant subjects. Therefore, project-based learning is implemented....
Proceedings Article

A Proposed Model to Learn Pancasila as a Philosophical System in School and University

Irawaty Irawaty, Diyantari Diyantari, Eva Leiliyanti
Every country has its own values which are expressed in their regulations. Indonesia has Pancasila which is the highest source of all regulations implemented in Indonesia. As the highest source of all regulations in Indonesia, the values in Pancasila have to be implemented in Indonesians’ daily lives....
Proceedings Article

Quality Function Deployment Analysis for Improvement of Practicum on Mechanical Engineering Education University of Palangka Raya

Wiyogo Wiyogo, Jhonni Rentas Duling, Debora Debora
The implementation of the practicum by the mechanical engineering education program becomes an important part because it provides experience in strengthening the students skills. From the results of observations made to students participant practicum production process II, got some things into the main...
Proceedings Article

Factors Affecting Preparation of the Implementation of Teaching Factory at Vocational High School State 3 Palangka Raya

Galfri Siswandi, Wiyogo Wiyogo, Jhonni Rentas Duling
This research is descriptive research with quantitative approach. This study was conducted on the Department of Culinary Engineering, Clothing Engineering and Hospitality Engineering. The research instrument used is a preparatory observation sheet. The results showed; factors that influence the preparation...
Proceedings Article

The Improvement of Learning Outcomes of Women Fashion Management by Using Model Media (Fragment)

Musdalifah Musdalifah, Winda Vadila
Women Fashion Management Course is one of the compulsory courses taken by the Fashion Design Education Study Program students in the 5th semester, which contains material about clothes making using tailoring technique. Learning Outcomes of Women Fashion Management course obtained by students in the 2015/2016...
Proceedings Article

Using TPACK to Map Teaching and Learning Skills for Vocational High School Teacher Candidates in Indonesia

Didik Nurhadi, Endang Purwaningsih, Kadim Masjkur, Lyau Nyan-Myau
Technological Pedagogical and Content Knowledge (TPACK) of teacher candidates for vocational high school is essential to follow the development of industrial revolution 4.0. A teacher is not only to be prepared to have content knowledge and pedagogy, but they also need to collaborate on technologies...
Proceedings Article

Attitudes of Civil Engineering Students Program Study of Building Technique Education to the ASEAN Economic Community

Nurhasan Syah, Syaiful Haq
This study aims to express the attitude of students of Civil Engineering Program of Building Engineering Education Studies toward AEC. This research was conducted at Civil Engineering Department of State University of Padang with quantitative descriptive research type. Sampling technique used Total sampling....
Proceedings Article

Factors That Affect the Quality Status of Vocational High Schools

Mukhidin Mukhidin, Jonah Mupita
In Indonesia a huge number of students prefer enrolling in general high school (SMA) over vocational high school (SMK), yet the government want more students (70%) enrolled in vocational high school. This article was aimed at investigating the effects of student gross retention rate, quality of teachers,...
Proceedings Article

Development and Application of Project-based Collaborative Learning Models on Vocational College in Indonesia

K. Arwizet, Nizwardi Jalinus, Fahmi Rizal
Challenges of the globalization demands vocational education graduates should be able to communicate, collaborate, critical thinking, and creative and innovative well. Competence of vocational education graduates was largely determined by quality and types the learning models provided. This paper aims...
Proceedings Article

Exploring Open Government Partnership as a Strategy for Promoting Transparency in Private University: An Initial Study

Mochamad Nizar Palefi Maady, Pelangi Eka Yuwita, Aprillia Dwi Ardianti, Fetrika Anggraini, Iin Widya Lestari
In Indonesia, high cost of tuition at private higher education is impunity for some students. A private higher education does not obtain any flow of funds from government and is required to self-financial-management by its foundation. Furthermore, students are reluctantly to study at private higher education...
Proceedings Article

Blended Learning, Implementation Strategy: The New Era of Education

Maesaroh Lubis, Mujiarto Parsusah, Mumu Komaro, Asari Djohar
The use of the internet as education media is expected to provide alternative solutions for problems related to education process (limited learning) in Indonesia, such as the physical distance between students’ house and education institutions, the high education cost, and limited time for studying....
Proceedings Article

Multimedia Animated Corrosion for Corrosion and Coating Metals Course

Yusep Sukrawan, Tatang Permana, Enda Permana, Kebri Kein Moudy Pajung
Multimedia Animation in teaching metal corrosion and plating course on the corrosion proses remains largely unused. There are many students who do not understand the corrosion process, despite having attended lectures. This study aims to discover the effect of Multimedia Animation on students achievement....
Proceedings Article

Developing Soft Skills Learning Model for Mechanical Engineering Students Vocational High School

Suryo Hartanto, Asrul Huda, Ratih Fordiana
This research was based on the very low competency of soft skills acquired by graduates of Mechanical Engineering of Vocational High School performed at workplaces. The objectives of the research were to identify specific soft skills that should be mastered by students of Mechanical engineering and to...
Proceedings Article

Integrating of E-learning to Improve Students Competence in Vocational School

Nuur Wachid Abdul Majid, Taufik Ridwan, Ahmad Fauzi, Rizki Hikmawan
This study discusses how integrating an e-learning to improved students competence in vocational school. This study was categorized as qualitative research that used case study approach. This research took place at one of Vocational High School and University in Special Region of Yogyakarta. The informants...
Proceedings Article

Development of Multimedia Animation Brake System

Yusep Sukrawan, Tatang Permana, Enda Permana, Kebri Kein Moudy Pajung
This study is based on the lack of variation in the use of instructional media, the lecturer uses only classical method with whiteboard as the media in brake system learning process. To overcome the above problems, will try to develop multimedia animation brake system. The aim of study is to develop...
Proceedings Article

Preliminary Design of Automatic Antenna Radiation Pattern Measurement System for Antenna and Propagation Laboratory Course

Asep Barnas Simanjuntak, Budi Mulyanti, Enjang Akhmad Juanda, Ade Gaffar Abdullah, Muhammad Naufal, Raksa Reza Pratama
Antenna radiation pattern is the major topic of Antenna and Propagation course in Telecommunication Engineering Program Study. Antenna radiation pattern measurement system is strongly required to conduct practical work in the laboratory. This study aims to design Automatic Antenna Radiation Pattern Measurement...
Proceedings Article

Apprenticeship Implementation of Productive Teacher at Vocational School in Indonesia

Suharno Suharno, Nugroho Agung Pambudi, Indah Widiastuti, Budi Harjanto
The Indonesian government has established a regulation on apprenticeship program for vocational teacher in the relevant industry. It is a structured training program which aims to provide teachers with knowledge and competency required to achieve mastery of a specific occupation for strengthening their...
Proceedings Article

Development of Interactive Instructional Media of Photography: Multimedia Skills Competency

Hendri Hendri, I Gede Yusartika, Nurie S. Athifa
This study was a Research and Development (R & D) using Instructional Development Institute (IDI) model (Define, Develop, and Evaluate). The aims were to produce a valid, practical, and effective Interactive Instructional Media Photography Subjects’ Multimedia Expertise Competence. Respondents were the...
Proceedings Article

Ongoing Process of Change Curriculum: Teaching and Learning Strategy of Vocational Teachers in Western Part of Indonesia

Nizwardi Jalinus, Syahril Syahril, Fahmi Rizal, Rahmat Azis Nabawi, Mahesi Agni Zaus
Rapid technological change, especially in information technology, brings major changes in teaching and learning strategies for teachers to deal with millennial. The purpose of this study was to identify teaching and learning strategies used by vocational teachers, especially in applying the 2013 Vocational...
Proceedings Article

Application of Assessment for Learning to Improve Student Learning Outcomes in Engineering Drawing Using CaD

Ambiyar Ambiyar, Refdinal Refdinal, Waskito Waskito, Fahmi Rizal, Hendri Nurdin
This study aims to show the application of assessment for learning can improve learning activities and student learning outcomes. The type of research is action research. T he study was carried out in two cycles, in which each cycle consisted of two meetings. Research respondents were students of grade...
Proceedings Article

Use of Products-based Module in the Process of Learning to the Practical Course

Elida Elida, Agusti Efi
The research aims to produce products based modules on subjects interesting gastronomic practice and fit for use in learning, and determine the effectiveness of the modules in improving student learning outcomes. Excess module based products is to give an opportunity to the students do the work practices...
Proceedings Article

The Practicality of Training Models Based on Knowledge Management System

Kasman Rukun, Gunawan Ali, Asrul Huda, Dedy Irfan, Muhammad Ihsan
The developing training models that meet the needs of teachers is an attempt to improve skills and professionalism. This article discusses the usefulness of the computer network knowledge management system skills training model for high school computer science teachers to develop their professional skills....
Proceedings Article

Implementation of Blended Learning in Vocational Teacher Professional Education

Aditia Dharma
The approach of hybrid learning or blended learning is seen as effective and has a positive impact on the learning process. The ability of teachers to utilize blended learning is expected to create an interactive learning environment and increase student learning participation. This blended learning...
Proceedings Article

Usability Evaluation of Adaptive Features in e-Learning

Johan Reimon Batmetan, Maxi M. Mintjelungan, Hizkia Kamang Manggopa, Billy M.H. Kilis, Djubir Ruslan Eddy Kembuan
The usefulness of an e-learning application feature is important to ensure a feature can continue to be used. This study aims to measure the usefulness of e-learning application features and to evaluate the adaptive features of e-learning used in higher education. This study uses measurement the usability...
Proceedings Article

Developing the Teaching Factory Learning Model to Prepare the Students of Vocational High School in Facing Global Competitions

Sanggam Roy Inhard Manalu
There is a miss match between competencies obtained from Vocational High Schools and those required by the business and industrial world. To face global competition, ASEAN Economic Community free markets and Revolution Industry 4.0, Vocational High Schools should develop their learning models to achieve...
Proceedings Article

Quality Analysis of Tiongkok Products

Marlina Marlina
This study aims to analyze the quality of Chinese embroidery products in the Embroidery Arts course. The research method used was descriptive method. The sample used in this study used a total sample. Data collection techniques used a rating scale that consisted of 45 portfolios of Chinese embroidery...
Proceedings Article

Self Regulated Learning and Limiting Belief Academic for College Student

Dedy Irfan, Kasman Rukun
Limiting belief of college student for finishing task from campus can affect the decline in college student academic of achievement. The decline in college student academic achievement will make the level of limiting belief even greater, which will interfere with the learning process carried out by the...
Proceedings Article

Assessment Methods with Gradations of Answers on Learning through E-Learning

Refdinal Refdinal, Ambiyar Ambiyar, Waskito Waskito, Hendri Nurdin
The assessment with gradations of answers methods on e-Learning was developed, could be referable to the vocational courses especially in Department of Mechanical Engineering, Faculty of Engineering, State University of Padang. The research that was adapting the Gall & Borg procedures, simplified into...
Proceedings Article

Job Shadowing in Woodworking Engineering at Civil Engineering Department, Technical Faculty, Universitas Negeri Padang

Rijal Abdullah
This research was motivated by low of learning outcomes and lack of mastery of student life skills in Woodworking Engineering. The purpose of the study was to reveal the impact of Job Shadowing implementation in Woodworking Engineering subject to student learning outcomes and their life skills. The hypothesis...
Proceedings Article

Development of the Teaching Material at Sheet Metal Course in Program Vocational Mechanical Engineering

Suparno Suparno, Syahril Syahril, Bulkia Rahim, Arwizet K.
Based on the observations, the problem to: limited availability of the books and yet Machining and Fabrication Techniques module that may cause the learning process is not maximized. The purpose of this study is to produce the learning module fabrication technique theory which is valid, practical and...
Proceedings Article

The Implementation of Vocational High School Management Strategy

Herry Sumual, Grace J. Soputan
The purpose of this study is to analyze the strategy of implementing vocational education management to produce graduates who are truly ready to enter the real world of work. The research method uses case studies by setting key informants purposively, namely principals, productive teachers, and students...
Proceedings Article

Academic Supervision Mechanism by Vocational High School Supervisor

Elfi Tasrif
Academic supervision activities are activities of school supervisors related to the process of fostering and assisting teachers in improving the quality of learning process / guidance and quality of student learning outcomes. This article reveals a number of aspects that are portraits of the conditions...
Proceedings Article

Learning Media for Vocational Education

Eka Asyarullah Saefudin, Kamin Sumardi
The aims of this article are to examine the extent of the role and development of learning media in vocational education, focusing on the aspects that must be considered in developing learning media, evaluation of learning media, learning media for vocational education in the form of simulators. The...
Proceedings Article

Employability Skills Assessment (Decision Making) of Vocational High School Students

Sri Subekti, Ana Ana
The wave of world industrial and economic progress that is rolling fast have a great impact on the economic and business competition of economies in the world. Indonesia was ranked number 37 in the global competitiveness index during the period 2015-2016 with a score of 4.52 which subsequently decreased...
Proceedings Article

Information Security Awareness on Data Privacy in Higher Education

Julyeta Paulina Runtuwene, Revolson A. Mege, Verry Ronny Palilingan, Johan Reimon Batmetan
There is always a negative aspect of a technology utilization. Security issues become a serious problem in information technology. The development of information technology makes access to data privacy is very important to note. The purpose of this study is to analyze and measure students understanding...
Proceedings Article

Comparative Study on the Implementation of Apprenticeship Viewed from the Perspective of Students and Employers (Study of Aspects of Skill, Attitude, Implementation)

Yudi Setiawan, Sumarto Sumarto, Tasma Sucita
The lack of absorption of vocational school graduates in the business world and industry is the government's concern as one of the indicators of not achieving the goal of vocational education to prepare professional and character workers. This paper aims to understand Gap attitude, skills and the implementation...
Proceedings Article

Effectiveness of Entrepreneurship Communication Skills in Business Group: Ethno-Andragogy Approach to Technical Vocational Education and Training (Ethnographic study: Processed snacks in Sumbawa)

Andi Haris, Mokhamad Syaom Barliana, Didin Saripudin, Ade Gaffar Abdullah
The entrepreneurship communication skills in the business group are still a problem that must be solved in order to form communication effectively. The ineffectiveness of communication can be seen from the open group vision and mission, the reciprocal relationship between one member and another member,...
Proceedings Article

Employability Skills Framework for Mechanical Engineering

Hari Din Nugraha, Asari Djohar, Mumu Komaro
Industrial Revolution 4.0 is an age of digitalization in the production process using digital system. The figure of an ideal mechanical engineering of the industry 4.0 should be able to response all the changing needs of the employability skills according to the market power of the manufacturing industry....
Proceedings Article

Development of Trainer Kit Quality Control (TKQC) on Motorcycle Electrical Competencies

Dede Saryono, Kamin Sumardi, Asep Setiadi H.
This study aims to produce Trainer Kit Quality Control (TKQC) on motorcycle electrical competencies, and the effectiveness of TKQC is obtained in improving understanding of the basics of motorcycle electrical lighting systems. Research methods using research and development (Research and Development)....
Proceedings Article

Analysis of the Occupational Safety and Health (OSH) in the Practice of Fiber to the Home (FTTH) Network Installation

Wini Awalia, Budi Mulyanti, Siscka Elvyanti
This study aims to analyze the knowledge and attitudes of students towards the implementation of occupational safety and health (OSH) base on SKKNI TIK.FO01.005.01 in the practice of Fiber to the Home (FTTH) Network Installation. The informants in this study were class XI students in 2017/2018 academic...
Proceedings Article

Utilization of Smartphone Technology of Students in Making Videos On Motorcycle Chassis Learning

Rian Oktariana Firmansyah, R. Aam Hamdani, Dandhi Kuswardhana, Inu Hardi Kusuma
Smartphones (Smartphones) are communication tools equipped with technology so that they can carry out various activities, such as internet, multimedia players, and cellular instant messaging, mobile phones can be used as learning facilities. The purpose of this study is to examine the use of smartphone...
Proceedings Article

The Development of Creative Problem Solving Skills Assessment on Photoelectric Effect

Agus Setiawan, Sutarno Sutarno, Ida Kaniawati, Andi Suhandi
In order to face disruption phenomena in the era of industry 4.0, creative problem solving (CPS) skills are important to be developed and assessed through learning process. However, there is no existing instrument that can be used to assess students' CPS skills in the physics domain. This study aims...
Proceedings Article

Parent and Student Preferences in Vocational Education

Eka Romdhony, Kamin Sumardi
A review of the literature of this journal discusses vocational education required by parents and vocational high school students. Parents expect their children to get jobs after completing vocational education, fulfilling the expectations of students towards the desires they aspire to. Expectations...
Proceedings Article

Effectiveness of Student Learning Results using Group Investigation Method and Brainstorming on Expert System Currency

Muhammad Ihsan, Kasman Rukun, Fahmi Rizal, Muhammad Ramadhan
This study aims to (1) know the results of student learning using the group survey method (2) know the results of student learning using the brainstorming method (3) know the difference between the learning outcomes of students using Group Investigation research methods and brainstorming in courses on...
Proceedings Article

Teaching Aid Development of Elecropneumatic Based Automation Course

Risfendra Risfendra, Oriza Candra, Syamsuarnis Syamsuarnis, Firman Firman
To conduct the entertaining and attractive activities on learning process, therefore the design of valid and practical teaching aid and its implementation on electro pneumatic based automation course is presented in this paper. An electro pneumatic sorting machine with Programmable Logic Controller (PLC)...
Proceedings Article

Design of Interactive Learning Graphic Design Based Tutorial Classic

Asrul Huda, Kasman Rukun, Suryo Hartanto, Ulfa Hasyanah Lubis
The function of education is to develop ability of potential and transform the character of students, therefore various aspects and efforts made to improve the education quality. One of way to improve learning result is by using information technology such as used interactive learning media tools. This...
Proceedings Article

Benefits of Using Animation Multimedia to Improve Students Ability in Mastering Phase Diagram Material of Engineering Subject between Higher and Lower Group Achievement

Mumu Komaro, Ariyano Ariyano, A. Suherman, A. Herdiansyah
Difficulty of understanding abstract concepts, complexity and dynamics are some problems faced by students in mastering materials of engineering subject, especially in the materials related to diagram phase. Data from a study conducted by an engineering lecturer indicates that 68.8% of students could...
Proceedings Article

The Importance of Communicative Action to the Successful AIDS-Responsive Structured Peer Education

Argyo Dermatoto, Siti Zunariyah, Bhisma Murti
Peer education is one of intervention activities to change health behavior in coping with AIDS. The objective of research was to study the importance of communicative action to the successful AIDS-responsive structured peer education of housewives. This qualitative research with exploratory approach...
Proceedings Article

Competitive Intelligence framework for Increasing Competitiveness Vocational High School Management

Verry Ronny Palilingan, Johan Reimon Batmetan
Vocational high school management have an important role in building strong competitiveness. Good management will make the competitiveness more improved. This study have purpose to improve the competitiveness of vocational high schools by using competitive intelligence tools. The method used in this...
Proceedings Article

The Tale of Two Type of Schools: The Comparison of Teacher Competencies and Graduation Rate between Vocational High Schools and High Schools in Buffalo Metropolitan Area, New York

Ilhamdaniah Saleh
This paper aims at describing the current status of Technical and Vocational Education Trainings (TVET) in the Buffalo Metropolitan Region by highlighting the stark contrast between teacher competencies and school performance in vocational high schools and high schools. The case study area is the Buffalo...
Proceedings Article

Production Unit Management Based on Product Innovation in SMK Manado

Nontje Sangi, Altje Wajong, Luckie Sojow
To find out about production unit management in terms of planning, implementation and supervision in SMKN 2 in Technology and Engineering group, at Manado City. This is a descriptive research with quantitative approach. Total sample taken is 30 respondents. The results of the research of production management,...
Proceedings Article

Smart City Maturity Level Analysis Using ITIL Framework

Muhammad Nur, Johan Reimon Batmetan, Hizkia Kamang Manggopa
The smart city has become the need for more modern and advanced urban communities with technological support. The development of a smart city is related to the increase of E-Government services applied to various government institutions. The purpose of this research is to analyze maturity level and smart...
Proceedings Article

The Importance of Collaboration Between Government, University and Industry on Education for Developing Country

Julyeta Runtuwene, Audy Kenap, Rolly Oroh
Education is the primary key to develop country. Almost all country that pay attention in education, could improve the citizen welfare in common. Education in developing country, in most case priority the science (especially basic science) which is focus for theory development. Professor in developing...
Proceedings Article

Implementation of Blended Learning on Subjects of Building Science in Vocational Schools

Nurmi Frida Dorintan Bertua Pakpahan
This study aims to determine the improvement of student learning outcomes, teaching activities, and learning activities in applying blended learning on the building science lesson in vocational schools. The research method used is Classroom Action Research. The results showed student learning outcomes...
Proceedings Article

The Mapping of Vocational School with Building Technical Drawing Concentration: Opportunities and Challenges in Construction Industry’s Needs

Trias Megayanti, Lilis Widaningsih, Nitih Indra Komala Dewi
In the last five years, the vocational secondary school (SMK) graduates absorption in the industry has been steadily declining. One still remains issues is the incompatibility of graduate competence with the skills required by the industry. The construction industry is one of the industries that should...
Proceedings Article

Development of Vocationalization Model of Basic Education Based on Local Wisdom in Era of ASEAN Economic Community

Ivan Hanafi, Irfan Zakir, Daryanto Daryanto, Taryudi Taryudi, Rina Febriana
The International Labor Organization report shows that more than 63 percent of Indonesia's workforce are basic education. The purpose of this research is to develop life skill education model for students at basic education level oriented to the development of discourse and work attitude to provide basic...
Proceedings Article

Development of Performance Assessment Telecommunications Expertise based on KKNI to support Vocational Competencies Achievement

Rizky Hikmawan, Ahmad Fauzi
Massive technology advancement shifts industrial demand in Indonesia from quantitative to qualitative demands, particularly in the field of telecommunication expertise. This Issue did not balance with the enhancement of learning instruction and assessment to support students in order to achieve the needed...
Proceedings Article

Implementation of Learning Models of Problem Based Learning to Improve The Creative Thinking Ability of Vocational Student

Tasya Aprilia, Lilis Widaningsih, Trias Megayanti
There are various learning models that can be applied during the learning process. Generally, teachers apply a teacher-centered learning model. Learning conditions by using a teacher-centered learning model can make the condition becomes bored, so it can reduce the students’ concentration in paying attention...
Proceedings Article

Comparison on Vocational Engineering Architecture High School Curriculum (Case study: Shizoukan High School and SMKN 2 Garut)

Rositha Mujica, Nevita Amelia Rahayu, Johar Maknun
In the process of the education system, Curriculum is one of the most important parts in the study activity. Content in the curriculum is part of the change for the future. In the education period from the beginning of education system when they start to study in elementary school, then junior high school,...
Proceedings Article

Competency-based Assessment Model on Job Performance in Housekeeping Department Apprenticeship

Yoyoh Jubaedah, Neni Rohaeni, Nenden Rani Rinekasari
The purpose of this study was to develop the competency based assessment model on job performance in the housekeeping department apprenticeship. It produced the design and the assessment tool also the draft of apprenticeship guidance book. This research used descriptive method with research and development...
Proceedings Article

E-Books in Teaching and Learning Process

Tuah Tuah, Nanang Dalil Herman, Johar Maknun
The e-book is currently not so much used in the teaching and learning system, because there are still many teachers who like teaching and learning with the old method but do not rule out the possibility that in the future the e-book will be used more, because in this article the author reviews research...
Proceedings Article

Student Achievement SMK Competence Relating to Entering The World of Work Global Preparedness (A Case Study in Vocational School in West Java)

Tasma Sucita
The development of the quality of education in Indonesia at the moment still has not improved significantly. Based on the data in the country it is known that the National Examination elementary schools to high schools not reflect the real value which, if interpreted in the ability to master students...
Proceedings Article

The Structural Models of the Determinant Variables that Influence the Productivity of Vocational Education

Mulianti Mulianti, Rodesri Mulyadi, Suhendrik Hanwar, Generousdi Generousdi
This study aims to obtain a model relationship determinant factors that affect the productivity of vocational education. Data collection is done by using instruments that have been tested for validity and reliability. The study population is a graduate of vocational education in West Sumatra. Sampling...
Proceedings Article

Blended Learning Effectiveness in Improving Learning Access in Higher Education

Hansi Effendi
One of the main problems of the development of higher education in Indonesia is how to increase public participation that is usually reflected by the Rough Participation Index (RPI). One of the government's programs to increase access to higher education is to utilize distance learning (DL) as one of...
Proceedings Article

The Characteristics of Handout in Total Quality Management (TQM) in Ototronic Course

Wawan Purwanto, Hasan Maksum, Toto Sugiarto, Dwi Sudarno Putra, Erzeddin Alwi
Classroom management is an important factor in creating a fun learning process. Each process of learning has to get attention and preparation so that the whole series of learning activities organized to improve student competence. Total quality management (TQM) is a management system that demands to...
Proceedings Article

Developing Interactive Learning Multimedia on Basic Electrical Measurement Course

Krismadinata Krismadinata, Elfizon Elfizon, Tiara Santika
This article discusses on the valid, practical and effective of an interactive learning media. This media is applied as a learning media for Basic Electrical Measurement Course for Vocational High School. The Adobe Flash CS6 is employed to design of media interactive features. The four-D model (Define,...
Proceedings Article

Effectiveness of Collaborative Problem Based Learning Model of Learning Computer Network Courses

Raimon Efendi, Asmar Yulastri
This study is based on the need analysis that finds the phenomenon that conventional learning model has not been effective enough in developing students learning potential optimally. This study aims to know the effectiveness and difference learning result of using Collaborative-Problem Based Learning...
Proceedings Article

The Development of Multimedia Engineering Drawing Animations for Increasing Vocational High School Students Competency in Indonesia

Mujiarto Mujiarto, As'ari Djohar, Mumu Komaro, Anggia Suci Pertiwi, Taofik Muhammad
Entering the ASEAN Economic (AEC) which started in 2015, there has been a tight competition in the ASEAN region, not only in the industrial sector but also in the improvement of human resources. In some vocational high school focusing on technology and engineering, the teaching and learning process is...
Proceedings Article

The Create Skills of Vocational Students to Design a Product: Comparison Project Based Learning Versus Cooperative Learning-Project Based Learning

Syahril Syahril, Nizwardi Jalinus, Rahmat Azis Nabawi, Yaumal Arbi
The graduates of vocational education are no longer expected to have only applicative skills that are limited ability to work competently. The skills of vocational education graduates should arrive at the skills to design a product that contributes to the nation's competitive ability. This study aims...
Proceedings Article

Personnel Development for Teachers of Technical and Vocational Education & Training (TVET) for Preventing Students’ Gender Violence

Yusuf Kurniawan, Melda Kumalaningrum, Ismi Dwi Astuti Nurhaeni, Rino Ardhian Nugroho, Intan Sani Putri, Ryza Dani Pratiwi
Students’ sexual violence has shown an alarming signal. Therefore, teachers play important role in supervising their students to prevent them from being the victims or perpetrators of sexual violence. However, not all teachers are competent in providing their students with adequate knowledge about it....
Proceedings Article

Developing Strategic Plan for Supporting Internationalization of Technical and Vocational Education and Training

Ismi Dwi Astuti Nurhaeni, Rino Ardhian Nugroho, Noni Srijati Kusumawati
In global competition era, universities are demanded to improve their quality and reputation through internationally-standardized improvement of education and research called internationalization. The attempts to actualize university internationalization has not been widely responded by vocational education...
Proceedings Article

Development of Competence-Based Art Learning Model in Primary School Students

Tri Monarita Johan, Ambiyar Ambiyar, Jalius Jamal
Nowadays the world of education is burdened by the low quality of learning. The quality is greatly decreased both from the aspects of the learning process and the learning outcomes of the students themselves. Mastery of art learning materials are still considered unsatisfactory while in the learning...
Proceedings Article

Luther’s Model Implementation on Multimedia Development for Building Construction Subject in Vocational High School (SMK)

Tjahyani Busono, Nanang Dalil Herman, Erna Krisnanto, Johar Maknun, Nitih Indra Komala Dewi
The use of computers in education is the first step towards realizing a technological society. Educational institutions need to optimize the potentials of information and communication technology. Integration of technological aspects into the learning is an effort to grow and to bring up interest & positive...
Proceedings Article

Women in Engineering (Women Choose Education in Engineering)

Nessy Solihati
Education is a right for everyone, regardless of age or gender. The development of science and education goes hand in hand with the increasing number of women trying to choose education in the field of engineering. The purpose of writing this review literature is to find out more deeply the reason women...
Proceedings Article

Development of Authentic Assessment in TVET

Niar Rosmaliana Rusalam, Wahid Munawar, Inu Hardikusumah
Assessment is part of the learning process. Assessment helps students to become more knowledgeable, critical, competent and responsive. Through assessment, the teacher can develop the competencies or talents possessed by each student. The competencies expected and mastered by students after the teaching...
Proceedings Article

Developing a Web-Based Monitoring and Evaluation Model of Vocational High School Teachers’ Performance after Certification Program

Ta’ali Ta’ali, Moch. Brury Triyono
The aim of this research is to develop a web-based monitoring and evaluation model of vocational teachers’ performance in the form of web-based SIMonev PKG Online, which produces: (1) a product that can run online and offline, (2) description and comprehensive information to schools and relevant institutions...
Proceedings Article

SAVI Learning Model for Students with Reading Difficulties

Aldjon Nixon Dapa, Hartati Muchtar, Zulfiati Syahrial
The purpose of this study was to describe the effectiveness of the SAVI learning model for students with reading difficulties. There were 7-9% of students from populations in grades 4 and 5, who had difficulty reading comprehension. Teachers also do not know of any specific learning models for students...
Proceedings Article

The Principal’s Roles in Revitalizing Vocational High School

Grace Jenny Soputan, Tinneke E.M. Sumual
The purpose of this study was to analyze the role of school principals in implementing the revitalization of Vocational High Schools. This study uses a qualitative approach with a case study method. Key informants are determined purposely, namely the head of the Vocational School in the fields of business...
Proceedings Article

Implementation of Contextual Learning Models to Improve Student Learning Results on Architecture Study and Environment

Riskha Mardiana, Adi Ardiansyah
Implementation of contextual learning model backed by the results of preliminary observations on the eyes of entrepreneurship which shows that learning activities have some constraints such as the lack of activeness of students in expressing ideas and problems faced. Students also lack interaction with...
Proceedings Article

Mapping Competencies of Vocational Teachers in the Industrial Era 4.0

Yadi Mulyadi, Tasma Sucita, Wawan Purnama
Vocational education is currently the main topic of public discussion at the national education level. The main problem raised to the surface is the gap between graduates of vocational education and the absorption of national industry. The quality of graduate competencies that still do not meet the standards...
Proceedings Article

Students Team Achievement Division Model in Reading Poetry to Elementary School

Norma Monigir, Mersty Rindengan
The purpose of this study is to improve the learning outcome of the 4th grade students in Indonesia language by implementing the Students Team Achievement Division Model in teaching Reading Poetry. At the beginning observation at the class in teaching poetry, most of the students didn’t follow the instruction...
Proceedings Article

Learning Multimedia Development of Finished Fabric Without Scissors

Pipin Tresna
Multimedia learning as a learning support is needed to make learning material more interesting. Multimedia is the integration of several multimedia such as books, audio, video, or television. The purpose of this study was to obtain data regarding the development of multimedia used in learning finished...
Proceedings Article

Development of Video Multimedia Operational Instruction on Industrial Sewing Machine

Mally Maeliah
Based on the preliminary studies on subjects studied this research review of multimedia instructional videos industrial sewing machine operation. This study aims to identify learning materials, create a multimedia design instructional videos, perform and analyze sis of the results of validation. The...
Proceedings Article

Knife Pleated Skirt Multimedia Video Tutorial to Improve Learning Quality

Astuti Astuti
Knife pleated skirt is one of the learning materials in the fashion pattern analysis course, UPI FPTK Fashion Education. Based on a preliminary study of 25 2013 fashion design students who had participated in the knife pleated skirt study, currently the learning used is still conventional, namely by...
Proceedings Article

The Analysis of Needs for E-Job Sheet Development on Children's Attire Based on Tutorial Model

Mirna Purnama Ningsih, Cucu Ruhidayati
E-job sheet tutorial-based model is a practicum guide that contains work steps, clearly and systematically written text to avoid mistakes in practice. This e-job sheet was designed as a source of learning in the practice of making children's clothing patterns. This needs analysis is carried out as the...
Proceedings Article

The Effectiveness of Simulator as Pneumatic Control System Learning Media

Purnawan Purnawan, D. Rohendi, Wardaya Wardaya, N. Darsono
The purpose of this research is to know the effectivity of simulator as learning media of pneumatic control system. The research employed quasi-experiment method with pre and post-test design. The material is limited to sequential motion control using two actuators applied to the transfer of objects....
Proceedings Article

The Implementation of Edmodo Using Cooperative Learning Model in Operating System

Tri Wrahatnolo, Setya Chendra Wibawa, Agung Wahono
The Objective of this study is to know the improvement of student learning outcomes using the cooperative learning method based on Edmodo. Edmodo was modified to make it easier for teachers to manage virtual classes. Edmodo is developed as a collaborative and connected learning platform between students...
Proceedings Article

Teacher’s Performance in Lesson Study through Experimental Method of the Lesson on Science Subject

Joni Bungai, Debora Debora, Agus Haryono
The implementation of lesson study in improving the teachers’ performance was conducted at Junior High School I in the Katingan state. The research was carried out on the science subject with the basic competency of describing elements, compounds, and solution. The activities of the teaching lesson study...
Proceedings Article

Study of the Implementation of BeSmart Computer Base Test (CBT) Application in SMK End Semester Examinations (Implementation studies were carried out at the State Vocational School 4 in Pekanbaru City)

Nurhairi Nurhairi, Danny Meirawan, Yadi Mulyadi
The examination is a form of evaluation held after the implementation of the learning process. The high level of graduation from a school reflects the success and progress of the school. The forms of evaluation that are often carried out so far are in the form of a paper test, which poses many problems,...
Proceedings Article

A Literature Review: Cognitive Assessment of HOTS in Technical Vocational Learning

Fendy Thomas, Wahid Munawar, Mumu Komaro
At present, design of learning orientation in vocational schools has led to HOTS (Higher Order Thinking Skills), because it can encourage students to think broadly and deeply about the subject matter, shape the character as an effective communicator, critical thinkers, and competent problems solver....
Proceedings Article

Eliminate Misconception in Learning

Subhan Nur Sobah Sobah CH, Wahid Munawar, Aam Hamdani
This article aims to examine the actions taken by the teacher to eliminate misconceptions in learning, the focus of which is to explore the actions taken by the teacher towards students either through learning media or learning models. Three strategies are used to identify the studies included in the...
Proceedings Article

Development Assessment Instruments in Indonesian Qualifications Framework (KKNI) Expertise Courses

Rina Febriana, Tuti Iriani, Agung Premono
This study aims to develop an assessment instrument in the subject area of expertise based on the Indonesian National Qualification Framework (KKNI). The development of tools includes the ability to work, mastery of knowledge, specialized skills and managerial skills of students at level 5 qualification...
Proceedings Article

The Safety Awareness of Construction Workers Regarding Workplace Health and Safety Standard

Pasha Nur Fauzania, Tutin Aryanti, Nanang Dalil Herman, Amalia Cahaya Putri
Construction work is one of the professions which has a high risk of accidents. Therefore, construction work has to be carried out properly in terms of occupational health and safety standards. The high rate of workplace accidents shows workers’ lack of understanding of occupational health and safety...
Proceedings Article

The Influence of Learning Models and Motivation Learning on Motorbike Mechanic Competence in Motorcycle Engineering Training in Bandung District

Ahmad Satibi, Iwan Kustiawan, Mumu Komaro
The Central Statistics Agency (BPS) showed that West Java Province experiencing an increase in unemployment around 0.46 million people a year. The Government, through the Community-Based Training Program (PBM), carries out educational activities and training for job seekers needs to be supported by careful...
Proceedings Article

Development of Product Based Learning Models on Multimedia Learning Materials in SMK N 2 Padang

Jeprimansyah Jeprimansyah, Ganefri Ganefri, Ambiyar Ambiyar
This study aims to develop learning models in the form of product-based learning models in Multimedia subjects in SMK N 2 Padang. The Product-Based Learning Model is designed to be able to improve student learning outcomes that are more creative in the learning process for the creation of a product so...
Proceedings Article

“IMPROVE” Methods Implementation to Improve the Computer Skills and Information Management Learning Outcomes of Vocational School Students

Christine Takarina Meisie Manoppo, Alfrina Mewengkang, Verry Ronny Palilingan, Daniel Riano Kaparang, Dwita Tubagus
This study aims to improve the learning outcomes of class X Multimedia B students of SMK (vocational high school) Negeri 1 Tondano through the IMPROVE learning method. The method used in this research is Classroom Action Research (CAR). In this Classroom Action Research, the subject of the study was...
Proceedings Article

The Contribution of Visual-spatial Intelligence towards the Drawing Capability of 11th Grader Teknik Gambar Bangunan (TGB) Students on Interior-exterior Subject in SMK-PU Negeri Bandung

Riskha Mardiana, Rr. Tjahyani Busono, Arif M. Fitri Permana
This research background is based on the gap among students regarding the capabilities to understand and visualize a certain shape and color of interior-exterior subject, seen by the visual-spatial intelligence of the students themselves. Visual-spatial intelligence and drawing ability research are focusing...