Proceedings of the 2015 International Industrial Informatics and Computer Engineering Conference
Session: Electric and Power
42 articles
Proceedings Article
Logic Matrix Design Method for Pan Boolean Algebra PID Control
Jin Chen, Tao Xu
Based on the analyzing for the Pan-logic graph of Pan -Boolean algebra PID control, it is introduced in this paper that a new method of Pan-logic truth table can be used to depict the relations between input and output variables of Pan-Boolean algebra PID controller. By quantizing and grading the controller...
Proceedings Article
Design of High Voltage Power Cable Real-time Monitoring System Function
Xilin Zhang, Dachuan Li, Zhenhao Wang
This articlediscusses the high-voltage power cables feature real-time integrated monitoring system designed from the fire, earth currents, surge arresters and partial discharge monitoring and supervision of 3G remote audio and video transmission and other aspects. The Actual operating condition of a...
Proceedings Article
Suppression Methods for Electromagnetic Interference of the DC Motor
Qun Hou, Yifan Zhou, Xin Peng, Long Zhang
The basic principle of electromagnetic interference, test methods, and suppression measures for DC motor are studied and analyzed. We select 18V/5A DC motor as the research object, and test full-frequency interference characteristics of the conducted and radiated interference. By analyzing the test data,...
Proceedings Article
Improved Control Scheme forShunt-typeH-bridge Active Power Filters
Lixin Ma, Lei Zhou, Haibing Zhang, Jun Gao
This paper attempts to improve the dynamic performance of H-bridge APF.The method of adaline harmonic detection is proposed to calculate harmonic current more accurately in less time while the supply voltage is distorted.H-bridge APF based on CPS-SPWMcan reach the more satisfying performance in lower...
Proceedings Article
Discussion on the Planning and Designing of Electric Power System
Xize Li, Jiange Li
This paper gives an introduction to the main content of the planning and designing of electric power system in electric power engineering as well as discussion on the principles and methods for the planning and designing of electric power system in electric power engineering. It aims to improve the reasonability...
Proceedings Article
Partial Discharge Ultraviolet Detection TechnologyApplied in Enclosed High-voltage Electrical Appliances
Lixin Ma, Xiaobo Zhou, Yu Shan
Forenclosed high-voltage electrical appliancespartial discharge is not easy to be found in inspection and ultraviolet detection equipmentcost is high, partial discharge ultraviolet detection system is designed. It is able to monitor the high voltage electrical appliancespartial discharge in real time...
Proceedings Article
Research on PV and battery control system with energy management technology in stand-alone DC micro grid
Chunxue Wen, Zhenguo Huo, Zhengxi Li
In the DC micro gird control system, it has an important significance for the reliable operation of the system to maintain bus voltage stability and energy distribution. The changing/ discharging control of the battery in different mode is often used to maintain the bus voltage stability. That is, its...
Proceedings Article
Flight Delay Cost Optimization based on Ground Power Supply
Weijun Pan, Zhejun Wang, Guangjun Zhou, Zeyu Pan, Huating Zhang
The flight delayinduces extra cost to airlines and passengers.In the process of flight delay, the cost to maintain the engine power supply is the primary part of delay loss. This paper takes different power supply modes in to account to improve the previous flight delay cost model. As well this paper...
Proceedings Article
Research on Model and Simulation of Hydraulic Lifting System of the Wave Power Generating Platform based on AMESim
Weinan Cao, Detang Li, Zhengshou Chen, Wentao Tang, Qin Lv, Man Huang
The paper will analyze the necessity of research on Model and Simulation of ocean wave power generation platform of hydraulic lifting system. Aiming to the working condition and mechanism of self-elevating power-generating platform ,the paper will provide overall designing scheme and analyze the working...
Proceedings Article
Research on the Modeling of Helicopter Background Magnetic Field based on the Magnetic Dipole Array
Jianyang Zhao, Chunsheng Lin
Magnetic anomaly anti-submarine technology is very important, this paper analyzes in detail the background magnetic interference characteristics of magnetic anomaly antisubmarine helicopter platform, establishes a magnetic dipole array model of helicopter background magnetic field, points out the practical...
Proceedings Article
Short-term Load Prediction of Power System Based on Genetic Neural Network
Shiwei Li, Yulong Li
As the basic content of power system’s operation management and real-time control, the short-term load forecasting is significant for power system to run safely and economically. A short-term power system load predicting model based on genetic neural network is proposed, which take many factors into...
Proceedings Article
Distributed Generation of one kind of Networking Mode and the Power Relations Analysis between Large AC Power Grid and Distributed Generation Grid
Jianye Liu, Xiaolong Sun, Zhanwen Fu
For the problems of distributed generation new energy connecting to the grid, a networking mode with dual PWM DC / AC power supply interface is proposed, This mode can achieve a large grid and micro-grid communication partitions, The operation and management of distributed power generation system is...
Proceedings Article
Phase Synchronization Based on Regions Heterogeneity in Suprachiasmatic Nucleus
Qingduan Fan, Zengrong Liu
Based on the suprachiasmatic nucleus (SCN) structure and molecular biology, numerous significant results have been obtained via some well-designed network-models as regards to circadian rhythm, in which synchronized cells can be entrained by a 24-h light-dark cycle. However, existing models cannot explain...
Proceedings Article
A Novel Wind Power Capacity Combined Forecasting method based on Backtracking Search Algorithm
JunChao Yang
As wind power is a mature and important renewable energy, wind power capacity forecasting plays an important role in renewable energy generation’s plan, investment and operation. Combined model is an effective load forecasting method; however, how to determine the weights is a hot issue. This paper proposed...
Proceedings Article
Micro-grid Monitoring System Based on Power Line Carrier of LonWorks
Ya Zhen, Yanping Feng
This paper introduces a design in developing of supervising system based on the LonWorks technology and Kingview. At first, the system combines Neuron chip with power supply controllers and switches as intelligent nodes to establish the network based on power line of LonWorks. In addition, through the...
Proceedings Article
Magnetic Design and Simulation Analysis of Magneto-rheological Damper
Xiaojuan Li, Xiaobin Liang, Fan He, Wei Guo, Weibin Wang
Magneto-rheological damper has advantages offast response, good stability and continuously adjustable damping force, thatis controlled by the damping force to achieve damping. This paper analyzes the influence of the thickness of the outer cylinder, work space, turns, damping channel length, coil currents...
Proceedings Article
A Monitoring Data Acquisition System for Substation Using ARM And 3G
Wen-ge Dong
The electricity data collection system of the transformer substation’s switch cubicle was proposed, which was based on the technology ARM. Realized the real-time monitoring of substation’s switch cubicle. Using S3C6410 as the processor, and designing signal conditioning circuit and AD conversion circuit...
Proceedings Article
Demonstration of Applying the Evaporative Cooling Technology to the 800W Transmitter
Rui Cao, Ruan Lin
In order to dissipate the heat effectively and improve the performance of 800W Transmitter, we designed a set of self-circulating evaporative cooling system for the 800W power amplifier unit and made an demonstration unit. Through this application, we removed the air-cooling fin and reduced the unit’s...
Proceedings Article
Wind Turbine Modeling Based on A Multi-model LPV Structure
Liren Cao, Xiaorong Hu, Ruohan Chen, Guoli Ji
This paper establishes a multi-model linear parameters varying (LPV) model for wind turbine. The multi-model LPV model is composed by several local linear models interpolating with weighting functions. Local linear models are identified at different wind speeds and pitch angles in the form of output...
Proceedings Article
Design of Remote Wireless Monitoring System of Substations Based on GPRS
Xiaohui Wang, Chunming Wu, Nannan Wang
As a place for voltage and current to change, focus and allocate, substation is an important node in the power system. The safe operation of its equipments plays a critical role in the safe and stable operation of the power system. The automation and unattended situation of substations is currently two...
Proceedings Article
Research on the Motor Drive Based Operating Mechanism for High Voltage Circuit Breaker
Yulong Huang, Liucheng Hao, Al-Dweikat Mohmmad, Cheng Tang, Shutong Gao, Zhiyong Yang
This paper describes an operating mechanism driven by a three-phase permanent magnet synchronous motor (PMSM) for high voltage circuit breakers (HVCB). It analyzes the relationship between the optimal moving contact travel of HVCB and the PMSM torque, and proposes the main parameters and requirements...
Proceedings Article
Equilibriumof Plasma constrained by Myxinesin a Galathea Magnetic Confinement System
Weiming Tong, Xianji Jin, Bing Li, Zhongwei Li
The structure and magnetic field configuration of a non-Tokamak magnetic controlled fusion device—Galathea--is introduced. The force balance of plasma confined by myxines in a toroidal topology is semiquantitivelyanalyzed and the computing formula of vertical magnetic field used to compensate the toroidal...
Proceedings Article
A Method of Obtaining ASIC Schematic Using Scan Chain
Xiaoming Chen, Yang Liu, Songsong Li
Hardware Trojan is easy to be embedded during IC’s design and manufacturing. Mostly used Trojan detection technique based on side-channel approach need a Trojan-free instance, and could not ensure Trojan-free instance’s consistent of schematic. With the help of scan chain, one of the widely used design...
Proceedings Article
Distribution Network Reconfiguration and its Algorithm
Huixia Sun, Yueguang Li
In this paper, a plant growth simulation algorithm was used to solve distribution network reconfiguration. The effectiveness of the proposed method has been tested and verified on IEEE 33 bus distribution system, the experimental results show that the Plant Growth Simulation Algorithm has better feasibility...
Proceedings Article
Design and Analysis of Small-scale Diffuser Augment Wind Turbines
Yaqiong Chen, Yuefa Fang
A new small-scale type diffuser augmented wind turbine (DAWT) is designed based on blade element momentum theory and the aerodynamic model of DAWT is established. This work presents an innovative approach to rotor blade design of small-scale diffuser augmented wind turbines. At the same radius and wind...
Proceedings Article
Research on Dynamic Performance of Coupler for Rescue EMUs
Kai Fang, Pingbo Wu, Qunsheng Wang
In order to study the influence of train running parameters to the rescue electric multiple units (EMUs) coupler dynamic performance, a train–coupler system simulation model was established. The influence of different braking level, braking time and braking original speed to the longitudinal force and...
Proceedings Article
Study of Smart Multi-antenna and Multi-channel for Smart Distribution Grid Based on Mesh Networks
Wei Fan
Smart Distribution Grid is an important part of Smart Grid and its operating conditions directly affect the effectiveness of the industry. In order to achieve the goal of real-time and reliability of data transmission of Smart Distribution Grid, we design a smart multi-antenna distribution communication...
Proceedings Article
Finite Element Rolling Simulation of Pure Copper Plates in Voronoi Polycrystalline Model
Ya-Jie Huang, Yong-Jin Chen, Liang Mao, Yi-Hua Zheng
Generally, in the mesoscopic simulation of polycrystalline materials, correctly establishing polycrystalline models is the key to numerical simulate rolling process. Based on the principle of Voronoi diagram, using MATLAB and ABAQUS Python script interface, the rolling process of pure copper plates in...
Proceedings Article
Application of On-line Detection Technology in Shanghai Power Grid
Jun Liu, Huaxin Wang, Tianshui Xue, Ruchen Zhang
The common on-line detection methods are introduced in this paper generally. Additionally, the application of on-line detection in shanghai distribution network is mainly analyzed and its further popularization is well programmed.
Proceedings Article
Research on Fixed-gain RangeTracking Loop
Kun Huang, Gan-lin Yang, Liang-liang Ma
The range tracking loop is an important part of measuring Radar. Based on the mathematic model,the analysis between -tracker and -trackeris studied. The effect of loop parameters isanalyzed.The formula of -tracker’s equivalent noise bandwidth(ENBW)isderived.The simulation results provide the theoretical...
Proceedings Article
Modification of a Visual Monitoring platform via the Power Carrier combining with senior multimedia
Chaoxiong Li, Tingting Wang, Heming Cheng, Junyi Yin, Jingli Gao, Tao Qin, Yinghui Han
To avoid the disadvantages of the traditional video surveillance, such as short distance transmission and one-way flow of analog signals, a modified visual monitoring platform was developed by the power line carrier communication and the senior multimedia technology in this work. The platform made from...
Proceedings Article
Cross Loading Motor Force Control System Design and Realization
Jinhong Li, Shutao Zheng
Cross loading equipment is one of the important test equipments in airplane, aviation and shipping field. It is used to test the performance of rudder used in airplane, ship and missile etc in laboratory. A cross loading equipment based torque motor was processed. This paper gives the design process...
Proceedings Article
Power Demand Side Management And Demand Response
Xinxia Su, Zhijie Wang, Yizhi Ye, Lijuan Chen, Zeyang Pei
This paper first introduces the concept of demand side management and its relationship with demand response; and then introduces problems and solutions involved in the process of implying the demand side management, such as the ladder electricity price, classify the electricity users, predict the loads...
Proceedings Article
A new method to improve disaster response capacity of important loads in distribution network
Lijun Qin, Xiongfei Zhai
Thispaperintroducesthedisasterresponseresearchstatusquoofimportantloadsindistributionnetwork,summeduptheresearchandpracticeresultsathomeandabroad.Thefocusofthispaperisproposedtheconceptofsituationawareness.Throughcarryingoutsituationawarenessindistributionnetwork,improvethedisasterwarningabilityofimportantloads.Summarizingthedifficultiesweneedtoovercomewhenputthistechnologyintoapplication.Pointingoutanewwayfordisasterresilienceresearchofimportantloads.
Proceedings Article
Large Chemical Companies’ Measures ForAnti-voltage Sag
Lijun Qin, Lingchao Zhang
Power grid volatility is inevitable due to its wide coverage, complex properties of users and influence of environment, equipment and human activities. Modern coal chemical industry operates on specific conditions characterized by high temperature and pressure, strong corrosion, inflammability, explosibility,...
Proceedings Article
Transformer DC Magnetic Bias Phenomena in HVDC
Lijun Qin, Wantao Yang
The ground current would lead to transformer DC magnetic bias in HVDC unipolar runtime, causing the transformer noise increases, increased vibration, overheating and other hazards, adverse affect on the series capacitors and even the grid. It introduces the research background and significance, the mechanism...
Proceedings Article
Analysis of Aircraft Ground Power Cost Based on Different Power Supply Methods
Guangjun Zhou, Weijun Pan, Kunming Chen, Zhejun Wang, Feng Xiong
Too aircraft hold on the ground not only brings inconvenience to passenger travel, but also increases the operation cost of airlines. Power supply equipment mainly includes APU (Auxiliary Power Unit) and 400Hz electrical power. According to aircraft ground operational situation, a mathematic model was...
Proceedings Article
Research on the Quantization Error Introduced by IEC61850-9-1/2 in Digital Electric Power Metering System
Yi Tang, Binji Wang, Bo Jiang
In digital electric power metering system, the sampled values of currents and voltages are transferred according to IEC61850-9-1/2 protocol. Quantization error will be introduced because the transferred data bit is limited. The quantization error introduced by IEC61850-9-1/2 is researched. The mathematical...
Proceedings Article
Fast Bus Load Forecasting for Smart Distribution System
Yi Zhu, Binglei Xue, Zhe Xu
Smart distribution network gathers massive load data with SCADA system. Bus load forecasting needs to increase the process speed while assuring the forecasting accuracy, to meet the real-time requirements. This paper proposed a fast bus load forecasting method for smart distribution system. This method...
Proceedings Article
The Magnetic Control Adjustable Characteristics of Transmission Spectrum of One-dimensional Thue-Morse Quasiperiodic Structure with Nanoparticle Magnetic Fluid
Jiaoping Li, Yingmao Xie, Lili Hao, Kun Liao
The magnetic control adjustable characteristics of one-dimensional Thue-Morse quasiperiodic structure with nanoparticle magnetic fluid defect local modes are studied by using the transfer matrix method. First, the physical model of one-dimensional Thue-Morse quasiperiodic structure with nanoparticle...
Proceedings Article
Research on Classification of Power Quality Disturbance Based on Weighted SVM Model
Xiangzheng Xu, Jinwei Ye
In this paper, the mathematical models of the disturbance signal were to be designed. Adaptive LMS algorithm generalized morphological filter was set up based on the mathematical morphological, and the noise of power quality disturbance signal was managed. The different frequency energy distributions...
Proceedings Article
Thermal analysis of high power LED light
Yunpeng Ma, Quan Zhou
As a typical green lighting source, but most of high-power LED input power is converted into heat, heat dissipation has important influence on its performance. For the LED lamp radiator, the heat conduction mode is obtained. By the finite element simulation analysis and thermal analysis of natural convection...