Proceedings of the 2017 2nd Joint International Information Technology, Mechanical and Electronic Engineering Conference (JIMEC 2017)

+ Advanced search
140 articles
Proceedings Article

Optimum Control Strategy Of MTG- Grid Tie With Isolated DC Grid Using GA-PI And Bidirectional Svpwm Converter

Hasan wahhab Salih, Shaorong Wang, Bashar sakeen Farhan
In the grid connection mode, many power generation companies prefer to install microturbine (MTG) as it provides high inertia to the system, requires less maintenance, high efficiency, able to burning many types of fuels as compare with another type of conventional power generation such a diesel generator....
Proceedings Article

Study On Static Characteristics Of A Herringbone Grooved Hydrodynamic Journal Bearing: Numerical Simulations

Dewang Chai, Qian Ding, Bin Wang
The flow field of a herringbone grooved hydrodynamic journal bearing is numerically simulated by using FLUENT, a computational fluid dynamics software, to reveal the complexity of hybrid oil flowing. Influences of structure parameters on pressure distribution, static characteristics and cavitation are...
Proceedings Article

A Design Of Ultra Wide Band Antenna With Three Notch Characteristics

Hengliang Tang, Jilan Li, Xin Zhang
In order to avoid the mutual interference between UWB system and narrowband communication system, the ultra wide band antenna with notch characteristic on diamond shaped patch antenna is improved. The coplanar wave guide (CPW) feed structure and a larger groove rectangle etching on the ground and rhombus...
Proceedings Article

The Design Of A New Phased Array Antenna For S-Band

Tao Yuan, Ji-Lan Li, Xin Zhang
The design of a new phased array antenna for S-band is designed in this paper. The structure of the new antenna is based on the traditional microstrip quasi-Yagi antenna. The G type micro-strip line is designed on the back of the antenna for feed line. Two director elements and two driver elements are...
Proceedings Article

The Design And Implemantation Of The Anti-Misoperation And Safety System For The Secondary Equipment Of The Smart Substation

Siyuan Zhang, Binbin Zhu, Dan Zhao, Dengxin Liu, Weidong Wang
The paper proposed the automatic technologies such as onekey safety measure, and the examination of the safety measure ticket to solve the safety measure and misoperation problems of the secondary equipment in substation expansion, reconstruction and device maintenance. Firstly, after the analysis of...
Proceedings Article

The Research Of Elevator Fault Diagnosis Method Based On Decision Tree Algorithm

Chang Liu, Xinzheng Zhang, Xindong Liu, Can Chen
Due to the complex structure of the elevator system and the complicated and diverse cause of the elevator operation faults, It is often difficult for maintenance personnel to comprehensively grasp the fault signs to determine the cause of the fault. Directing against this peculiarity, this paper proposes...
Proceedings Article

Temperature Monitoring System For Plant Factory Based On Multi-Sensor Data Fusion

Shigang Cui, Kun Liu, Xingli Wu, Yongli Zhang, Lin He
For the problem of low accuracy of temperature monitoring system, this paper proposed a multi-sensor data fusion algorithm applied to plant factory temperature monitoring system. First, Dixon criterion was used to eliminate the gross error in the measurement data, then the temperature data fusion value...
Proceedings Article

An Accelerated 3D-Magnetostatic Field Computation Method With Tetrahedral Surface Integrals

Wenchun Zhao, Wubing Zhu, Jinwu Zhuang
An innovative accelerated integral equation method is proposed based on a fast search algorithm for both shared and non-shared faces among mesh elements. This method successfully accelerates the computational process of solving for the tetrahedral coupling coefficients. By using the proposed accelerated...
Proceedings Article

A New AR-Based Framework For Wrist Assessment And Rehabilitation

Lu Zeng, Bingjin Ji, Xiao Li
The existing rehabilitation systems based on augmented reality (AR) are lacking of the targeted training of joint and requiring a large number of auxiliary equipment. This paper proposes a novel framework for wrist-rehabilitation assessment and training that integrates AR technology with kinesiotherapy...
Proceedings Article

Effective Spectrum Sensing By Weighted Data Fusion In Full Duplex Cognitive Radio Networks

Qiming Yu, Hu Jin, Yifan Liu, Wenqing Zheng
As the full duplex (FD) technique becoming more sophisticated, a novel cognitive radio network (CRN) protocol called "listen-and-talk"(LAT) was proposed. Based on self-interference cancellation (SIC) technique, LAT protocol can promote the utilization of spectrum resources with the cost of the performance...
Proceedings Article

CCA-Secure Leveled FHE From Multi-Identity Fully Homomorphic Encryption

Weili Wang, Bin Hu, Xiufeng Zhao
This paper proposes a generic construction of CCA-secure fully homomorphic encryption (FHE) scheme. First, we introduce a new primitive called multi-identity fully homomorphic encryption, which works in the multi-identity setting; that is, homomorphic evaluation can performed on ciphertexts created with...
Proceedings Article

Research On Frequency-Domain Kernel Identification Of Volterra Series

Shihao Wu, Yafeng Meng, Bo Wang
In this paper, the identification method of Volterra series frequency-domain kernel is introduced from two aspects: parameter identification and non-parameter identification, then gives prospect. Volterra series theory has been applied and developed in recent years, becomes one of the most effective...
Proceedings Article

The Analysis And The Research Of The Helicopter PIO

Penghui Xu, Yanqiu Ju, Chi Qi, Yue Wang
Closed-loop analysis method is proposed for pilot induced coupling with helicopter flight control system in closed loop. Combining with the longitudinal identification model of a certain helicopter, McRuer pilot model, designed stability augmentation system and frequency domain model are established...
Proceedings Article

Assembly Process Bill Of Material Construction Technology For Spacecraft Assembly And Integration Based On Proengineer

Wan Bi-le, He Wen-xing, Chen Chang-yu
Spacecraft is a complex electromechanical thermocouple system, which composed of several subsystems and thousands of products. The spacecraft assembly process is to assemble the products in the main structure of the spacecraft, and completes the relevant detection and testing. The spacecraft development...
Proceedings Article

Optimization Of The Control Parameters Of A Servosystem Based On The Genetic Algorithm Method

Qi Hao, Zhankui Qiu, Xiaowei Wang, Antong Gao
The control parameters optimization of the servosystem in parallel robots, which is the basis of the control system design of the robot, is very important. In this paper, the parameters optimization of the servosystem based on the genetic algorithm method is introduced. In the servosystem of parallel...
Proceedings Article

A Distributed Transmission Method For Satellite Data Based On Streaming

Guo Peng, Manyun Lin, Xiangang Zhao, Cunqun Fan, Lizi Xie
The transmission and collection of satellite data will directly affect the success or failure of the subsequent satellite products. So the data transmission, the stability and efficiency of the collection, has been highly valued. This paper presents a distributed data transmission architecture, through...
Proceedings Article

Design And Implementation of Online Shopping Mall System Based On ASP.NET

Zhang Yali, Wang Xiaokan
With the globalization of Internet economy, the diversification of customer demand and the modernization of logistics technology, online shopping has become a very popular consumption pattern among many consumers, especially the younger generation. Online shopping mall system is realized by using ASP.NET...
Proceedings Article

Design and Improvement of a Frequency Synthesizer Based on PLL+DDS+PLL

Sun Ying, Yin Mei-liang, Xie Teng
A L-band high performance frequency synthesizer is presented for space TT&C channel. PLL+DDS+PLL structure is used to realize small step-size, high spectrum purity and low phase noise. Experimental result shows that its phase noise is better than -100dBc/Hz@10KHz and its spurious suppression is better...
Proceedings Article

Research on elastic modulus measurement system based on STM32

Feng Liu
Elastic modulus,which can be used as the the difficulty of material's producing elastic deformation is an important parameter in the engineering application.At present, the method of measuring modulus of elasticity is the original manual measurement. In this text, i want to talk about one method using...
Proceedings Article

Research on improved K - nearest neighbor algorithm based on spark platform

Yushui Geng, Xianzhao Yan
Today, big data technology is growing rapidly. The birth of Hadoop makes people concerned about the study of MapReduce, And Spark through the introduction of RDD data model and memory-based computing model, So that it can be well adapted to the data mining of big data this scene, And superior to Hadoop...
Proceedings Article

Research on Ultrasensitive Detecting Method Based on Surface Enhanced Raman Scattering Effect

Jia Liu, Yi Xu, Changjun Zhao, Zhenqiong Lin
Surface enhanced Raman scattering (SERS) spectroscopy has been reported as an ultrasensitive detecting method. Adding salts is a main way to induce nanoparticles aggregation to obtain giant enhancement of Raman signal. However, this method needs more procedures and the adding salts may interfere the...
Proceedings Article

A study on the influence of regional medical service design on the life of aged people

Zhong Lei, Yang Chang, Jiang Hong-ling, Yang Yue
In recent years, the number of Chinese aging population continues to increase, the design of public self-service aging population can effectively improve the social work efficiency based on social cost savings, solve some of the problems of an aging society. Through the analysis and summary of the needs...
Proceedings Article

Research on the realization of interactive dynamic system based on Flash ActionScript

Fu Jie
Digital signature plays a more and more important role in e-commerce. The basic methods of digital signature are introduced and a digital signature scheme based on digital certificate is proposed in this paper. Digital certificate is generated after personal information is written. The effective data,...
Proceedings Article

Research on the Innovation of Shaanxi's Higher Education Teaching Model Based on Internet

Fengxiang Jiang
Internet has changed the way of life and brought out the reform of traditional industries since the human being entered into the information era. Education has great changes, especially the higher education. All Chinese universities and colleges are facing opportunities and challenges. Universities and...
Proceedings Article

Design and Implementation of High Precision Digital Frequency Meter Based on C8051F020 Microcontroller

Li Su, Aiguo Shang, Jin Qin, Jingjing Yang
For the oscilloscope, spectrum analyzer and other analog circuit equipment measured characteristics of the narrow frequency range, slow frequency measurement, the design of the digital frequency based on a C8051F020 microcontroller. Frequency meter hardware part mainly includes C8051F020 microcontroller,...
Proceedings Article

Dynamic Modeling and Simulation of ball bearing faults in aero-engine dual rotor-bearing-stator coupling system

Wei Zhang, Hao-hao He, An-bo Ming, Zheng-wei Yang
In order to conduct the thorough research to the aero-engine, aiming at dual rotor-bearing system of practical aero-engine, a new dual rotor-ball bearing-stator coupling system dynamic model is established. stator motion, the flexible support, squeeze film damper(SDF)were considered in the model, meanwhile...
Proceedings Article

Design of wireless monitoring system based on GPRS

Yanqin Yang
In industrial production and daily life, there are many occasions where wireless technology is required, especially in high-risk locations, where no wiring or unattended location can be found. This paper proposes an embedded wireless monitoring system based on GPRS , which uses the ARM processor as the...
Proceedings Article

Research on Calibration Method for Digital Energy Meter

Hongwei Xu, Zhan Meng, Junwei Zhang, Chao Ding, Zhongxiao Cong
As an important part of digital energy measurement system, the measurement accuracy of digital energy meter needs to be calibrated. There are some problems in the existing calibration methods. In this paper, a new calibration method has been proposed, which can be used to calibrate digital energy meter...
Proceedings Article

Study on Efficiency Model of Gasoline Engine Used by Hybrid Electrical Vehicle

Jinguang Liang
It is a difficult problem to precisely control a gasoline engine used by a Hybrid Electrical Vehicle (HEV) operating in high efficient states because of the engine's uncertain fuel consumption characteristics. The problem can be resolved by setting up an efficiency model for the engine to implement feedback...
Proceedings Article

Quantitative Research on Gas Exchange Loss of Internal Combustion Engine

Jinguang Liang
At present, there is no theoretical equation for quantitatively calculating gas exchange losses of an internal combustion engine. In order to accurately research on change rules of the gas exchange losses during the working process of internal combustion engines, the equation for quantitative calculating...
Proceedings Article

A Group Recommendation Algorithm Based on Group Members' Weights and Project Popularity

Min Li, Chunming Wu, Li Ye
With the rapid development of many types of social networks, the number of people involved in group activities is increasing, and thus group recommendation systems have been widely studied. This paper proposes a collaborative filtering algorithm to mine groups' interests. In view of the different roles...
Proceedings Article

Study on Crushing Mechanism of Cone Crusher

Hongjun Yu, Qiou Fei, Rujie Wang, Binglu Fan, Yamin Wang, Boqiang Shi
The single particle crushing model is studied by EDEM software, and the model is extruded with different speeds and different angles. Using horizontal angle of 0 degrees, 20 degrees, 30 degrees, 45 degrees, 60 degrees, 70 degrees plate to squeeze the single particle model, the results show that the ore...
Proceedings Article

Study on pipeline photogrammetry in pipeline gallery modules in the SASOL project

Zhibo Wan, Shengwen Yu, Shangguo Liu, Ganggang Gao, Youqiang Dong
This study addresses the problem of pipeline opening measurement in SASOL pipeline gallery modules by proposing the use of an industrial photogrammetry method. The position coordinates of the pipeline opening in the local coordinate system were first obtained and then converted to the overall modular...
Proceedings Article

Reliability Assessment of Solid State Lasers Based on Step Stress Accelerated Degradation Test

Xiaolu Fu, Jun Yang
Highly-reliable and long-lifetime solid state lasers require the extremely high reliable assemblies over a long period of time. In order to shorten the test time, we apply step stress accelerated degradation test (SSADT) to assess solid state lasers' reliability. Firstly, the assumptions and introductionof...
Proceedings Article

Adaptive Sliding Mode Variable Structure Control of Chaos in Permanent Magnet Synchronous Motor

Yue Liu, Shuo Zhou
This paper proposes a robust adaptive sliding mode control strategy aiming at the complex chaotic behavior of permanent magnet synchronous motor (PMSM). Using the sliding mode control technique, a time varying surface is constructed. Then an adaptive gain of the robust control law is established considering...
Proceedings Article

Mechanical structure optimization design of an offshore backfilling plough -fenders

Liquan Wang, Jianguo Qin
Offshore backfilling plough are used for backfilling for laying pipelines in seabed trenches; fenders are the primarily consist of an offshore backfilling plough; Research on the virtual join forces of the fenders is essential for predicting the join forces of the backfilling plough during backfilling....
Proceedings Article

Design of Gateway of 4G and ZigBee Network Fusion Technology Based on Intelligent Street Light System

Yongjun Zhang, Xuan Wang
In order to solve the problem of poor switching between wireless communication signals in traditional streetlight systems, the intelligent streetlight gateway based on ZigBee wireless sensor network and 4G network module is designed.[1,2]The gateway uses Freescale's ARM Cortex-A9 embedded processor as...
Proceedings Article

Development and Application of Casing and Flavor Preparation with Mobile Tanks in Tobacco Industry

Xiaojun Hu, Liang Zhao, Wei Ying
In the traditional casing and flavor preparing system, raw materials are mainly transferred to the tank through pipes, which brings the problems of material loss, flavor mix as well as low accuracy. In order to avoid flavor mix, a mobile tank casing and flavor preparation technique was developed and...
Proceedings Article

Parallel Design and Performance Optimization based on OpenCL Snort

Hongying Xie, Yangxia Xiang, Caisen Chen
With the rapid increasement of the network speed and number of threats which hide in the network poses enormous challenges to network intrusion detection systems (NIDS). As the most popular NIDS, snort can run as a single threaded application. However, it may not be able to detect intrusions in real-time...
Proceedings Article

Interactive Design of Free Sharing APP Based on Mobile User Requirements Analysis

Chen Wei, Bu Qing Kai
In recent years, people's living standards have been improved. The constant updating of things has kept people in the pursuit of fashion, a phenomenon that is evident in young groups. For the items that have been changed, they are often shelved or discarded, and the value of the goods is not fully represented....