Proceedings of the 2016 International Conference on Mechatronics, Control and Automation Engineering

Session: Design and Manufacturing Systems and Technologies

14 articles
Proceedings Article

Maintenance Decision for the Key Parts of Machine Tool Using the Monitoring Information

Shuang Zhou, Tao Zan, Min Wang, Congcong Guo
Considering the monitoring information of the operation process of the machine tools, a maintenance decision model is established in this paper. Firstly, the monitoring information of the key parts of the machine tools is obtained by using data acquisition system. Based on the kurtosis value which are...
Proceedings Article

Analysis on The Idling Energy Consumption of Machine Tools during Its Operation Cycle

Shuang Liu, Xiang Li, Zhenzhen Lei
Rhymes with the large amount of energy loss during the operation cycle of machine tools, environmental contamination occurs simultaneously. To cut down the energy cost, there is a growing need to research into the basic rules of energy consumption of machine tools. This paper focuses on the energy consumption...
Proceedings Article

Maintenance Design and Computer Simulation of A Certain Type of Gear Wheel Reducer

Shuhai Wang, Fenghe Tao, Guibo Yu, Xujun Su, Xia Tao, Zhanjie Yuan
The gear wheel reducer of self-propelled weapons is the final reduction gear drive in the drive system. Under the same ratio of transmission, using reduction gear can reduce the load of transmission, drive shaft, main reducer, differential mechanism and half shaft, the size becomes smaller and the drive...
Proceedings Article

The Application of General Homotopy Method on Planar Four-Bar Path Synthesis

Pei-chieh Chin, Hsiang-chen Hsu, Shen-li Fu
Homotopy method is a numerical continuation method that can locate all the zeros of any given function without the specifying of initial estimates. With the assistance of proper programming technique, homotopy method can be efficient and reliable. The application of homotopy method on kinematic synthesis...
Proceedings Article

Research on Decision-making Model for Maintenance Mode Risks of Equipment Components within Task Cycle

Jia Liu, Jianwei Lv, Jianjun Yang
To develop scientific and reasonable maintenance decision-making scheme for equipment during task execution, select a suitable maintenance mode for components, control and reduce the risk of equipment failure to the maximum, this paper analyzes the basic types of maintenance mode for equipment components...
Proceedings Article

Rough Lattice: A Combination with the Lattice Theory and the Rough Set Theory

Yingchao Shao, Li Fu, Fei Hao, Keyun Qin
The rough set theory, introduced by Pawlak in 1982, is a formal for dealing with the uncertainties. But it cannot directly deal with the uncertainties with order structure. The lattice theory, introduced by Peirce and Schr$ddot{o}$der towards the end of the nineteenth century, is a mathematical tool...
Proceedings Article

Evaluation of Equipment Maintenance Support Processes Based on ANP

Xiang Zhao, Gang Chen, Ning Zhu
Under the new military change, it needs to evaluate the equipment maintenance support processes before optimizing it. For this reason, this paper proposes an evaluation method of equipment maintenance support processes based on ANP through establishing the evaluation index system and adopting ANP method...
Proceedings Article

Carbon Footprint Calculation and Applied Research of Printing Enterprise Based on the ISO14064-1 Standard

Yongshuang Zhu, Lijie Wang, An Chen
Objective: This work was aimed to study carbon footprint calculation method of printing enterprise. Method: Carbon footprint calculation methods and procedures were studied based on ISO 14064-1 standard and the actual operations of printing enterprises. Carbon footprint of a specific printing enterprise...
Proceedings Article

An Improved Content Based Image Retrieval System On Apache Spark

Yixiao Duan, Linhua Jiang, Xiao Lin, Xiaodong Chen
Traditional CBIR (Content Based Image Retrieval) system on parallel platform spends too much time facing large-scale images. In this paper, we present an improved CBIR system based on Apache Spark, a fast and general large-scale data processing engine. At first, we do preliminary processing to build...
Proceedings Article

Application of Infrared CCD Thermal Imaging in the Measurement of the Temperature of Aluminum Electrolyte

Zhengguang Xu, Shuai Zhang, Jinjun Wang
In this paper, a method that non-contact measurement of the temperature is proposed. It is based on the principle of infrared thermal radiation and using the infrared CCD thermal imaging technology. In order to measure the temperature of aluminum electrolyte, an infrared image temperature measurement...
Proceedings Article

3D-Partition: A Design Space Exploration Tool for Three-Dimensional Network-on-Chip

Ji Wu
In this paper, we introduce a compositive model of fabrication cost, network throughput and power consumption, to explore different 3D design options of 3D NoCs. The model allows partition of IPs across different dies in 3D stack. Based on the model an estimation tool, 3D-Partition, is created and validated...
Proceedings Article

Optimization Research on Multi-objects Aircraft Maintenance Shop Scheduling Problem

Shaohua Yang, Ying Wang, Gang Liu
To make the maintenance adapt for the modern aircraft, the modeling and scheduling algorithm of aircraft maintenance shop scheduling problem are discussed. At the base of maintenance shop scheduling modeling referring to the formalization of flexible job shop scheduling problem, genetic algorithm is...
Proceedings Article

Experimental Research on the Mechanical Properties of Steel Slag Recycled Aggregate Concrete

Yun Dong, Hui Wang, Junjie Gong
This article is aimed to discover the effect of replacement rate of slag recycled aggregate on the compressive strength of recycled concrete. The slag has been crushed and sieved to regenerate recycled aggregate, than replaced the different ratio of natural aggregate with recycled aggregate in premixed...
Proceedings Article

Study on Hydraulic Characteristic of the Tube Settler

Yonghai Yu, Dong Liu, Xiaofeng Cui
Little information could be found about formulas and coefficients for calculating the head loss of tube settler, which makes it difficult for the designers to get the values. Herein, using computational fluid dynamics software FLUENT as the platform, the hydraulic characteristics involving in water flow...