Proceedings of the 3rd Annual International Conference on Mechanics and Mechanical Engineering (MME 2016)
Session: Chapter 5: Electrical Engineering
16 articles
Proceedings Article
The Fault Diagnosis of Shield Disc Cutter Based on Neural Network
Kui Chen, Jia-Dong Chang, Hai-Xia Wang, Long-Yu Wu
In order to predict the wear fault of disc cutter in shield machine, a BP neural network model was established and then trained by inputting several groups of disc cutter wear fault samples data including cutter rotate speed, cutter head torque, tunnelling speed, total thrust force and soil pressure...
Proceedings Article
Study on Testing Technology of Creepage Distances and Clearances in Safety Standards for Electric Toys
Yan-Yan Suo, Li-Juan Yin, Cheng-Bo Liang, Bei-Bei Xu
In electric toy tests, the creepage distance and clearance tests are related to techniques of various fields and there are no specific measurement paths and rules in relative standards, which results in the big difference in test results. In this paper, the technical requirements of the creepage distance...
Proceedings Article
Electromagnetic Driving Modal and Control of Magnetic Levitation Spherical Active Joint
Fan Zhang, Li Zeng, Zhi-Da Zhu, Jin Sun
The traditional universal driving joint has the friction and wear, so its moving parts would get hot and its dynamic performance would become worse when working. Based on the Integration of motors, magnetic levitation, robotics and other techniques, a novel magnetic levitation spherical reluctance active...
Proceedings Article
Relationship between Injury Risk of Student Occupant and Different Driving Speed of School Bus
Liao Yi, You-Ming Tang, Na Lv, Zhen-Qun Fang
In order to study the student occupant injury risk of school bus at the driving speed exceeding 30km/h, the numerical simulation model of children occupant restraint system of school bus was built using software LS-DYNA 3D. According to the China regulation of GB24406-2012, the model was loaded with...
Proceedings Article
The Structural Optimization of One-Armed Planet Carrier of Wind Turbine Gearbox Based on Lightweight Structure
Bo Huang, Yu-Tao Yan
One-armed planet carrier's static stress analysis and modal analysis were accomplished by the finite element method. The deformation, stress magnitude and distribution and natural frequency of the planet carrier were obtained. Under the condition of satisfying the ultimate strength and fatigue life,...
Proceedings Article
Wireless Communications Mode of Support Reaction Test System for Aerial Work Platform
Zhi-Xin Liu, Xiang-Chun Niu, Sheng-Hua Qiao
The measuring and monitoring of the support reaction of the aerial work platform is an important method to prevent its overturn. In view of the fact that the turntable is in a rotational movement during the whole process, it is easy to cause the tangling of the signal cable if using the traditional wired...
Proceedings Article
Design and Analysis of Highly Efficient Led Power Supply with Pfc-LLC Topology
Xiu-Min Wang, Chen Su, Li-Ting Jiang, Ri-Hui Xiong, Jian-Bing Xu
A half-bridge light emitting diode drive resonance power supply which consist of power factor correction rectifier and inductor-inductor-capacitor resonant topology circuit, the controller for each part is ST6562 and L6599 chip, respectively. This design and analysis has been presented. The MATHCAD is...
Proceedings Article
Force Feedback Control of Tele-Operation Based on Electro-Hydraulic Multi-Freedom Manipulator
Ming-De Gong, Kai-Wen Chen, Tao Ni
The paper presents the control strategy to solve the problems that multiple-freedom force and displacement coupling existing in the bilateral servo force-feedback control architecture for tele-operation parallel manipulators. The control strategy transfers the values of the working resistance connected...
Proceedings Article
Research on Maintenance Training System of Semi Physical Equipment Fire System
Da Xu, Wen-Bo Fan, Ye Luo
Aiming at the existing problems of traditional equipment fire system maintenance training, the semi physical maintenance training is researched, analyzes the main task of fire system maintenance training, researches on key technology of semi physical maintenance training system, makes the overall design...
Proceedings Article
Tact Optimization Algorithm of LED Bulb Production Line Based on CE-PSO
Xiao-Mei Hu, Yue Yu, Ming-Hang Li, Yi-Ning Jiang
With the wide use of automatic production line in manufacturing enterprises, it is very important to calculate the optimal production tact to make production lines achieve maximum productivity. A CE-PSO algorithm is applied to optimize the tact of the LED bulb production line in this paper. The main...
Proceedings Article
Optimization Design of Printing Nozzle for a Delta 3d Printer
Jun Wang, Hong-Jie Chen, Ya-Jing Gong, Quan Wang, Jun Ren
Delta 3D printer is a kind of 3D printer with parallel structure. It is easy to print and has wide adaptability. However, the complex installation, plugging of print head, surface quality of printed parts and quality of printing head limits the development of its application. This paper analyzes the...
Proceedings Article
The Third Superharmonic Resonance Analysis of RLC Circuit with Sensor Electronic Components
Gao-Feng Li
Based on RLC series circuit of sensor electronic components with nonlinear capacitance research object, the first approximate solution of third superharmonic resonance of the nonlinear vibration system is obtained by means of the method of multiple scales for nonlinear oscillations. The third superharmonic...
Proceedings Article
Development of CAD System for Gauge based on UG
Xue-Bin Liu, Hai-Li Jia, San-Peng Deng, Chong-Ning Li
In this paper, the structure of CAD system for gauge has been established. By creating parameters model of gauge, smooth limit gauge is developed and designed using the computer aided design calculations in the environment of VC6.0 and UG NX 6.0, in order to improve the gauge design efficiency, the use...
Proceedings Article
Workbench Film Thickness Detection Based on Laser Sensor
Mo-Yun Liu, Han-Bing Tang, Ma-Chao Jin, Zhen Zhou
For large heavy-duty rotary table, in order to improve the machining precision of the workbench in practical work, the workbench is usually set above the oil film with stable thickness. Therefore, the accurate measurement of the oil film thickness of the workbench hydrostatic guide rail is very important...
Proceedings Article
Calculation Method of Twist Error of Aero-Engine Blade Based on Three-Coordinate Measuring Data
Chao Li, Zhi Huang, Yun Huang
Blade is one of the core components of the aero-engine, which requires a high degree of geometric dimension precision, so strict geometric shape detection and evaluation is very necessary to guarantee blade machining quality. Twist error is one of the important parameters of blade quality evaluation,...
Proceedings Article
Research on Path Planning of Aero-Engine Blade Profile Measurement Based on Coordinate Measuring Machine
Kai Li, Zhi Huang, Yun Huang
It is important to the aero-engine blade's profile inspection that the aero-engine blade's surface is highly complex with distortions. But its dimensional inspection demands a large number with measurement method most adopts the coordinate measuring machine (CMM). And the rational measurement path planning...