Proceedings of the 2018 3rd International Conference on Control, Automation and Artificial Intelligence (CAAI 2018)

Analysis and Multi-objective Optimization on the Stamping of High Strength Steel

Authors
Wenyu Ma, Jianwei Yang, Jun Zhang, Ye Yao, Shaobo Li, Xuebin Zheng
Corresponding Author
Wenyu Ma
Available Online August 2018.
DOI
https://doi.org/10.2991/caai-18.2018.52How to use a DOI?
Keywords
high strength steel; springback; thinning rate; optimization
Abstract

In recent years, the high strength steel has gained great attention. And springback is an obvious drawback. In this study, the analysis was conducted on the relationship between thinning, springback and blank holder force, friction coefficient. The central composite design of tests and finite element simulation were used.The response surface method was employed.The maximum thinning increases with the increase of blank holder force and friction coefficient. The maximum springback value decreases with the increase of blank holder force and friction coefficient. And the multi-objective optimization was employed to optimize the thinning and springback. And the maximum thinning increases with the decrease of maximum springback value.

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2018 3rd International Conference on Control, Automation and Artificial Intelligence (CAAI 2018)
Series
Atlantis Highlights in Intelligent Systems
Publication Date
August 2018
ISBN
978-94-6252-595-5
ISSN
2589-4919
DOI
https://doi.org/10.2991/caai-18.2018.52How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Wenyu Ma
AU  - Jianwei Yang
AU  - Jun Zhang
AU  - Ye Yao
AU  - Shaobo Li
AU  - Xuebin Zheng
PY  - 2018/08
DA  - 2018/08
TI  - Analysis and Multi-objective Optimization on the Stamping of High Strength Steel
BT  - Proceedings of the 2018 3rd International Conference on Control, Automation and Artificial Intelligence (CAAI 2018)
PB  - Atlantis Press
SP  - 218
EP  - 220
SN  - 2589-4919
UR  - https://doi.org/10.2991/caai-18.2018.52
DO  - https://doi.org/10.2991/caai-18.2018.52
ID  - Ma2018/08
ER  -