Proceedings of the 2018 International Conference on Computer Modeling, Simulation and Algorithm (CMSA 2018)

Study on Optimal Adjustment Method on Stroke of Digital Beam Pumping Unit Based on the Change of the Indicator Diagram Area

Authors
Xiangqian Xu, Haobin Zhou, Longlong Yin
Corresponding Author
Xiangqian Xu
Available Online April 2018.
DOI
10.2991/cmsa-18.2018.33How to use a DOI?
Keywords
beam pumping unit; indicator diagram; parameter optimization
Abstract

The new optimal adjustment method on stroke of the digital pumping unit is proposed in this paper after analysis the main disadvantages of the existing digital pumping unit on adjustment speed. The new method is based on the change of the area of the indicator diagram. According to the change of the area of the diagram, the stroke of the pumping unit is optimized in the optimization module. The digital optimization module is set up between the RTU and the frequency converter of the existing digital pumping unit. The dynamic data compression algorithm is used for real-time access on the module, which improves the real-time performance of the system. And the module has the function to communicate with the control with the RTU and the frequency converter. So this pumping unit has the intelligent ability to control pumping speed, and no longer relies on the host computer. Tests about the module had been carried out at the oil production site and the changes of the indicator diagram and the adjustment of the stroke was recorded. The experimental results have shown that the method is feasible. The optimization method on stroke of the digital pumping unit is in accordance with the changing trend of the supply capacity of oil well.

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2018 International Conference on Computer Modeling, Simulation and Algorithm (CMSA 2018)
Series
Advances in Intelligent Systems Research
Publication Date
April 2018
ISBN
10.2991/cmsa-18.2018.33
ISSN
1951-6851
DOI
10.2991/cmsa-18.2018.33How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Xiangqian Xu
AU  - Haobin Zhou
AU  - Longlong Yin
PY  - 2018/04
DA  - 2018/04
TI  - Study on Optimal Adjustment Method on Stroke of Digital Beam Pumping Unit Based on the Change of the Indicator Diagram Area
BT  - Proceedings of the 2018 International Conference on Computer Modeling, Simulation and Algorithm (CMSA 2018)
PB  - Atlantis Press
SP  - 142
EP  - 145
SN  - 1951-6851
UR  - https://doi.org/10.2991/cmsa-18.2018.33
DO  - 10.2991/cmsa-18.2018.33
ID  - Xu2018/04
ER  -