Proceedings of the International Conference on Electronics, Mechanics, Culture and Medicine

Influence of Orthopaedic Drilling Parameters on Surface Roughness and Cutting Force of Bone Drilling Process

Authors
R. Izamshah, M.S Noorazizi, M.S Kasim, C.H Che Haron
Corresponding Author
R. Izamshah
Available Online February 2016.
DOI
10.2991/emcm-15.2016.114How to use a DOI?
Keywords
Bone drill-bit; Surface Roughness; Cutting Force; Machining; Response Surface Method
Abstract

In orthopaedic surgery internal fixation of bone fractures using immobilization screws and plate is common procedure. This surgical procedure involved drilling into bone and fixative components interaction. Many problems are encountered with the bone drilling process such as holes accuracy, drill wander and excessive heat generation which were directly related with the drilling parameter. This paper investigates the effect of drilling parameter namely spindle speed and feed rate on the cutting force and surface roughness performance. Design of Experiment (DOE) historical data of Response Surface Method (RSM) were adopted to evaluate the correlation between the cutting parameter and the holes performance. From the conducted investigation, the most significant parameter that affect the holes performance was spindle speed followed by the feed rate. In addition, the interaction between feed rate and spindle speed also controlled the holes performances.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Conference on Electronics, Mechanics, Culture and Medicine
Series
Advances in Computer Science Research
Publication Date
February 2016
ISBN
10.2991/emcm-15.2016.114
ISSN
2352-538X
DOI
10.2991/emcm-15.2016.114How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - R. Izamshah
AU  - M.S Noorazizi
AU  - M.S Kasim
AU  - C.H Che Haron
PY  - 2016/02
DA  - 2016/02
TI  - Influence of Orthopaedic Drilling Parameters on Surface Roughness and Cutting Force of Bone Drilling Process
BT  - Proceedings of the International Conference on Electronics, Mechanics, Culture and Medicine
PB  - Atlantis Press
SP  - 610
EP  - 616
SN  - 2352-538X
UR  - https://doi.org/10.2991/emcm-15.2016.114
DO  - 10.2991/emcm-15.2016.114
ID  - Izamshah2016/02
ER  -