Proceedings of the 2018 2nd International Conference on Applied Mathematics, Modelling and Statistics Application (AMMSA 2018)

Influence of Process Parameters on Springback of S-Shaped U-Channel Stamping

Authors
Wenyu Ma, Xuebin Zheng, Tao Li, Ye Yao, Shaobo Li, Hongya Zhu
Corresponding Author
Wenyu Ma
Available Online May 2018.
DOI
10.2991/ammsa-18.2018.16How to use a DOI?
Keywords
deep drawing; springback; analysis
Abstract

This research was conducted to analyze the influence of process parameters on springback of S-shaped U-channel stamping for DP590. The test was designed using Taguchi test and results were analyzed according to analysis of variance (ANOVA). The process parameters analysed includes punch velocity, blank holder force, friction coefficient and blank thickness. The most influential parameter is blank holder force in this analysis, followed by friction coefficient and punch velocity. And blank thickness shows the least effect. The effect of these parameters can be quantified using this analysis method. The influence of friction coeffient, blank holder force, punch velocity and blank thickness were 56.21%, 33.06%, 7.98% and 2.75% respectively. The results can be used to get a deep understanding on the springback of DP590.

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2018 2nd International Conference on Applied Mathematics, Modelling and Statistics Application (AMMSA 2018)
Series
Advances in Intelligent Systems Research
Publication Date
May 2018
ISBN
10.2991/ammsa-18.2018.16
ISSN
1951-6851
DOI
10.2991/ammsa-18.2018.16How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Wenyu Ma
AU  - Xuebin Zheng
AU  - Tao Li
AU  - Ye Yao
AU  - Shaobo Li
AU  - Hongya Zhu
PY  - 2018/05
DA  - 2018/05
TI  - Influence of Process Parameters on Springback of S-Shaped U-Channel Stamping
BT  - Proceedings of the 2018 2nd International Conference on Applied Mathematics, Modelling and Statistics Application (AMMSA 2018)
PB  - Atlantis Press
SP  - 76
EP  - 79
SN  - 1951-6851
UR  - https://doi.org/10.2991/ammsa-18.2018.16
DO  - 10.2991/ammsa-18.2018.16
ID  - Ma2018/05
ER  -