Proceedings of the 2018 2nd International Conference on Applied Mathematics, Modelling and Statistics Application (AMMSA 2018)

Application of Subsection Approximation Torque Curve Acceleration and Deceleration Motion Control Algorithm in Rigid Tapping of Drilling Center

Authors
Xu Liu, Haixin Zou, Xiangfa Kong, Jun Lu
Corresponding Author
Xiangfa Kong
Available Online May 2018.
DOI
10.2991/ammsa-18.2018.26How to use a DOI?
Keywords
segmented approximation; mechanical characteristics; torque curve; servo spindle rigid tapping
Abstract

Rigid tapping in drilling and tapping centers is an electromechanical control system with strong nonlinearity, uncertainty, and difficulty in accurate modeling. It will inevitably be affected by nonlinear and uncertain factors such as friction and mechanical resonance. The traditional motion control algorithm is difficult to fundamentally solve the contradiction between the rapid stability of the system response and the high stability accuracy. The electromagnetic torque is one of the most important physical quantities of the three-phase asynchronous motor, and the mechanical characteristics are the main characteristics of the motor; from these two aspects it is often inseparable to analyze the motor. This paper proposed an algorithm of subsection approximating torque curve acceleration and deceleration and applied this algorithm to the rigid tapping engineering practice of CNC machine tools. The control method did not need to establish the exact mathematical model of the torque characteristics of the motor mechanical characteristics. The method of segment approximation achieves the modeling of the mechanical characteristic torque curve, has satisfied the comprehensive index requirements and technical feasibility of the system for rapidity and smoothness, and finally passed the test of the test platform and verified the actual tapping of the drilling.

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2018 2nd International Conference on Applied Mathematics, Modelling and Statistics Application (AMMSA 2018)
Series
Advances in Intelligent Systems Research
Publication Date
May 2018
ISBN
978-94-6252-529-0
ISSN
1951-6851
DOI
10.2991/ammsa-18.2018.26How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Xu Liu
AU  - Haixin Zou
AU  - Xiangfa Kong
AU  - Jun Lu
PY  - 2018/05
DA  - 2018/05
TI  - Application of Subsection Approximation Torque Curve Acceleration and Deceleration Motion Control Algorithm in Rigid Tapping of Drilling Center
BT  - Proceedings of the 2018 2nd International Conference on Applied Mathematics, Modelling and Statistics Application (AMMSA 2018)
PB  - Atlantis Press
SP  - 124
EP  - 129
SN  - 1951-6851
UR  - https://doi.org/10.2991/ammsa-18.2018.26
DO  - 10.2991/ammsa-18.2018.26
ID  - Liu2018/05
ER  -