Proceedings of the 2nd International Conference on Electronic & Mechanical Engineering and Information Technology (EMEIT 2012)

<Previous Article In Volume
Next Article In Volume>

Study on Clinching of Magnesium Alloy Sheets with Different Lower Die Parameters Based on DEFORM 2D

Authors
Shanling Han, Yiwei Wu, Yuan Gao, Qingliang Zeng
Corresponding Author
Shanling Han
Available Online September 2012.
DOI
10.2991/emeit.2012.274How to use a DOI?
Keywords
magnesium alloy sheets, clinching, DEFORM 2D, lower die parameters, joint strength
Abstract

Clinching is a high-speed mechanical fastening technique which is suitable for joining lightweight sheet materials. In order to study the influence of lower die parameters on strength of joint, this paper presents the analysis of the clinching based on DEFORM 2D software. The lightweight, strong and durable, magnesium alloy sheets were carried out to be the joint materials, and the variation of changed process for die depth, groove fillet radius, groove depth, groove width and draft angle were analyzed. By studying the main geometrical parameters of clinched joint, the influence trend in the strength of joint were obtained by the single assessment process. The result indicated that the strength of joint can be effectively improved by suitably controlling the die parameters.

Copyright
© 2012, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2nd International Conference on Electronic & Mechanical Engineering and Information Technology (EMEIT 2012)
Series
Advances in Intelligent Systems Research
Publication Date
September 2012
ISBN
10.2991/emeit.2012.274
ISSN
1951-6851
DOI
10.2991/emeit.2012.274How to use a DOI?
Copyright
© 2012, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

risenwbib
TY  - CONF
AU  - Shanling Han
AU  - Yiwei Wu
AU  - Yuan Gao
AU  - Qingliang Zeng
PY  - 2012/09
DA  - 2012/09
TI  - Study on Clinching of Magnesium Alloy Sheets with Different Lower Die Parameters Based on DEFORM 2D
BT  - Proceedings of the 2nd International Conference on Electronic & Mechanical Engineering and Information Technology (EMEIT 2012)
PB  - Atlantis Press
SP  - 1242
EP  - 1245
SN  - 1951-6851
UR  - https://doi.org/10.2991/emeit.2012.274
DO  - 10.2991/emeit.2012.274
ID  - Han2012/09
ER  -