Proceedings of the 2017 5th International Conference on Frontiers of Manufacturing Science and Measuring Technology (FMSMT 2017)

Machining Error Compensation of Single Shaft Part Based on Touch Trigger Probe

Authors
Xinrui Li, Zeqing Yang, Hongqiang Sang, Libing Liu
Corresponding Author
Xinrui Li
Available Online April 2017.
DOI
https://doi.org/10.2991/fmsmt-17.2017.128How to use a DOI?
Keywords
Error compensation, Single shaft, Touch trigger probe
Abstract

The precision machining of shaft parts is of great significance in the fields of aerospace, automobile manufacturing and so on. For important high precision shaft parts processing, especially in the beginning of mass production, it is easy to produce single piece of waste. Aiming at the error compensation problem of single shaft part, this paper proposes that after the semi-finishing, the dimensional accuracy of the workpiece is tested by the trigger probe, based on the measurement result, the least squares mathematical model of machining error is established, through the CNC macro program, in accordance with the cutting position,the error is compensated in the finishing stage.Therefore, single shaft part on-line detection, error compensation, precision evaluation are integrated into one,which is good to improve its processing efficiency,processing conditions, and the quality of processing. Experiments show that this method can reduce the limit error by about 52.5%.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2017 5th International Conference on Frontiers of Manufacturing Science and Measuring Technology (FMSMT 2017)
Series
Advances in Engineering Research
Publication Date
April 2017
ISBN
978-94-6252-331-9
ISSN
2352-5401
DOI
https://doi.org/10.2991/fmsmt-17.2017.128How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Xinrui Li
AU  - Zeqing Yang
AU  - Hongqiang Sang
AU  - Libing Liu
PY  - 2017/04
DA  - 2017/04
TI  - Machining Error Compensation of Single Shaft Part Based on Touch Trigger Probe
BT  - Proceedings of the 2017 5th International Conference on Frontiers of Manufacturing Science and Measuring Technology (FMSMT 2017)
PB  - Atlantis Press
SP  - 644
EP  - 648
SN  - 2352-5401
UR  - https://doi.org/10.2991/fmsmt-17.2017.128
DO  - https://doi.org/10.2991/fmsmt-17.2017.128
ID  - Li2017/04
ER  -