Proceedings of the 5th International Conference on Research of Agricultural and Food Technologies (I-CRAFT 2025)

Study of the Dependence of the Rotor of a Small Size Feed Distribution Device on the Number of Rotations and the Number of Blades

Authors
Dilshod Khudaynazarov1, *, Yusuf Axmedjanov1, Fotima Jamolova2, Shokir Tursunov3, Odil Toshbekov3
1Tashkent State Technical University, Tashkent, Uzbekistan
2Yangiyer Branch of Tashkent Institute of Chemical Technology, Sirdarya, Uzbekistan
3Termez State University, Termez, 190111, Uzbekistan
*Corresponding author. Email: Xudoynazarov.Dilshod@inbox.ru
Corresponding Author
Dilshod Khudaynazarov
Available Online 7 May 2026.
DOI
10.2991/978-94-6239-666-1_65How to use a DOI?
Keywords
Shovels; rotor; roughage; ground corn; ground straw; ground alfalfa; bunker
Abstract

According to the analysis, it was found that 85 percent of the cattle and poultry in livestock are raised on family farms, private and peasant farms, and due to the lack of small-scale devices used for distributing feed for these farms, feed distribution is labor-intensive and performed manually.

Taking into account the above, a small-scale innovative feed distribution device was developed for small livestock farms with 20–30 head of cattle. The results of the research were determined based on the requirements of family farms, private and peasant farms, and small livestock farms. According to the identified research analysis, the main indicators of the feed spreading device and its technological scheme were developed. The effect of the height and width of the feed pouring window of the developed feed distribution device on the quality of feed distribution was studied in the research.

The quality of distribution of coarse feed largely depends on the number of blades and the number of revolutions of the rotor. Taking this into account, based on the performance and size of the spreading device specified in the initial requirements and specifications, 1, 2, 3 and 4 shovels were prepared.

Copyright
© 2026 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Research of Agricultural and Food Technologies (I-CRAFT 2025)
Series
Atlantis Highlights in Sustainable Development
Publication Date
7 May 2026
ISBN
978-94-6239-666-1
ISSN
3005-155X
DOI
10.2991/978-94-6239-666-1_65How to use a DOI?
Copyright
© 2026 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Dilshod Khudaynazarov
AU  - Yusuf Axmedjanov
AU  - Fotima Jamolova
AU  - Shokir Tursunov
AU  - Odil Toshbekov
PY  - 2026
DA  - 2026/05/07
TI  - Study of the Dependence of the Rotor of a Small Size Feed Distribution Device on the Number of Rotations and the Number of Blades
BT  - Proceedings of the 5th International Conference on Research of Agricultural and Food Technologies (I-CRAFT 2025)
PB  - Atlantis Press
SP  - 710
EP  - 717
SN  - 3005-155X
UR  - https://doi.org/10.2991/978-94-6239-666-1_65
DO  - 10.2991/978-94-6239-666-1_65
ID  - Khudaynazarov2026
ER  -