Proceedings of the 2023 9th International Conference on Architectural, Civil and Hydraulic Engineering (ICACHE 2023)

<Previous Article In Volume
Next Article In Volume>

Preparation and characterization of early strength polycarboxylate superplasticizer

Authors
Yuliang Ke2, 3, 1, *, Yunhui Fang1, 2, Xiuxing Ma1, 2, Yuanqiang Guo1, Lina Zhong1, 2, Hao Chen1, 2
1KZJ New Materials Group Co., Ltd, Xiamen, 361101, China
2Xiamen Key Laboratory of Engineering Additives, Xiamen, 361101, China
3Shaanxi KZJ New Materials Co, Ltd, Xi’an, 710000, China
*Corresponding author. Email: yuliang_ke8207@163.com
Corresponding Author
Yuliang Ke
Available Online 30 December 2023.
DOI
10.2991/978-94-6463-336-8_56How to use a DOI?
Keywords
early strength type; early strong functional monomer; compressive strength; AMPS
Abstract

Through the adjustment of polyether monomer, polyether molecular weight and early strength functional monomer, the best process formula was determined, and its molecular weight was tested by gel permeation chromatography, as well as the product performance. The experimental results showed that the early strength polycarboxylate water reducer (ES-PCE)was prepared by solution polymerization using a vinyl polyoxyethylene ether with a molecular weight of 5000 and a 2-acrylamido-methylpropane sulfonic acid in the ammonium persulfate, hydrogen peroxide, and sodium bisulfite initiator system. Compared with similar products PC-1 and PC-2, the compressive strength of ES-PCE at 1d, 7d, and 28d was comparable to that of similar products PC-1, Compared to similar domestic products PC-2, it is about 2 ~ 3 MPa higher, indicating that ES-PCE can completely replace similar foreign products, to improve template turnover rate. Thereby it promotes the rapid development of prefabricated buildings.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2023 9th International Conference on Architectural, Civil and Hydraulic Engineering (ICACHE 2023)
Series
Advances in Engineering Research
Publication Date
30 December 2023
ISBN
10.2991/978-94-6463-336-8_56
ISSN
2352-5401
DOI
10.2991/978-94-6463-336-8_56How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Yuliang Ke
AU  - Yunhui Fang
AU  - Xiuxing Ma
AU  - Yuanqiang Guo
AU  - Lina Zhong
AU  - Hao Chen
PY  - 2023
DA  - 2023/12/30
TI  - Preparation and characterization of early strength polycarboxylate superplasticizer
BT  - Proceedings of the 2023 9th International Conference on Architectural, Civil and Hydraulic Engineering (ICACHE 2023)
PB  - Atlantis Press
SP  - 483
EP  - 490
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-336-8_56
DO  - 10.2991/978-94-6463-336-8_56
ID  - Ke2023
ER  -