Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

Preparation of a hybrid photopolymer for stereolithography

Authors
Yining Zhao, Mingshan Yang, Ran Ding, Qisong Shi, Ming Zhao
Corresponding Author
Yining Zhao
Available Online October 2015.
DOI
https://doi.org/10.2991/icadme-15.2015.303How to use a DOI?
Keywords
free radical-cationic hybrid; interpenetrating network, formulation optimized.
Abstract

New free radical-cationic hybrid photopolymer, consisting of acrylate-based and epoxy-based photosensitive resin for stereolithography was prepared. The influence of the initiator sort and amount on the curing degree of the photopolymer was investigated. Photopolymerization process, degradation temperature, dynamic mechanical thermal properties of the Interpenetrating polymer networks (IPNs) formed are characterized by using FTIR spectroscopy, TG and DMA. The results indicate curing reaction is reacting sufficiently and all performance is better when the ratio of acrylate / epoxy resin is 1:0.75. And post-curing could also improve properties of hybrid resin after UV curing.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
978-94-6252-113-1
ISSN
2352-5401
DOI
https://doi.org/10.2991/icadme-15.2015.303How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yining Zhao
AU  - Mingshan Yang
AU  - Ran Ding
AU  - Qisong Shi
AU  - Ming Zhao
PY  - 2015/10
DA  - 2015/10
TI  - Preparation of a hybrid photopolymer for stereolithography
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 1628
EP  - 1632
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.303
DO  - https://doi.org/10.2991/icadme-15.2015.303
ID  - Zhao2015/10
ER  -