Proceedings of the 2017 7th International Conference on Advanced Design and Manufacturing Engineering (ICADME 2017)

Finite Element Simulation on Process Chain in Welding and Bending

Authors
Yuanbin Fang, Can Wang, Liping Zhang
Corresponding Author
Yuanbin Fang
Available Online July 2017.
DOI
10.2991/icadme-17.2017.87How to use a DOI?
Keywords
Bending; welding; process chain; deformation
Abstract

It simulates boom process chain in bending and welding. It obtains deformation of the plate after bending, and predicts welding deformation of the boom considering bending. At the same time, using Metra SCAN, finite element model is verified correctly by experiments. The results show that it occurs 4.3mm deviation in the 90o bending angle near the middle position, and 4.8mm deviation in the 110o bending angle. It is consistent in deformation trend, and proves favorably correctness of finite element model of bending. Deformation trend is contracted inwards. Peak value is located at the free end of weld position, and is 1.66mm. It is 1.9mm deviation in the side of boom. The deviation is mainly located in the middle position of 90o bending angle. The error between simulation results and experimental results are within 3mm. It meets the requirement of engineering application. It is consistent in deformation trend. It proves accuracy of finite element model of process chain in bending and welding.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2017 7th International Conference on Advanced Design and Manufacturing Engineering (ICADME 2017)
Series
Advances in Engineering Research
Publication Date
July 2017
ISBN
978-94-6252-349-4
ISSN
2352-5401
DOI
10.2991/icadme-17.2017.87How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yuanbin Fang
AU  - Can Wang
AU  - Liping Zhang
PY  - 2017/07
DA  - 2017/07
TI  - Finite Element Simulation on Process Chain in Welding and Bending
BT  - Proceedings of the 2017 7th International Conference on Advanced Design and Manufacturing Engineering (ICADME 2017)
PB  - Atlantis Press
SP  - 458
EP  - 463
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-17.2017.87
DO  - 10.2991/icadme-17.2017.87
ID  - Fang2017/07
ER  -