Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)

<Previous Article In Volume
Next Article In Volume>

Post-Processor Development For 5 Axis DMG 50U Milling Machine Using Siemens NX 12 Software

Authors
Haris Setiawan1, *, M. Yazid Diratama1, Fajar Risnandar1, Amung Amung1
1Manufacture Engineering, Bandung Polytechnic for Manufacturing, Bandung, Indonesia
*Corresponding author. Email: haris@polman-bandung.ac.id
Corresponding Author
Haris Setiawan
Available Online 17 February 2024.
DOI
10.2991/978-94-6463-364-1_109How to use a DOI?
Keywords
component; formatting; style; styling; Post-processor; Siemens NX 12; 5-axis machine; Numerical control
Abstract

Moriseiki DMG 50U 5 Axis CNC machine that has a table-table configuration with 3L-2R machine type. Different configurations result in different machine movements, hence the need for a post-processor. The post-processor is an interface that connects the CAM software system and the numerical control machine. The post-processor has a work function to convert CL data or Toolpath from CAM software into numerical language in accordance with the machine control used. This research aims to create a post-processor with a safe procedure for use on the Moriseiki DMG 50U 5 Axis CNC machine. The post-processor that has been made will be tested to make a product with indexing and simultaneous cutting methods then analyze the geometry of the product. The resultshow the post-processor can be used properly and can meet the demands to make products and can use in the Moriseiki DMG 50U 5 Axis CNC machine.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)
Series
Advances in Engineering Research
Publication Date
17 February 2024
ISBN
10.2991/978-94-6463-364-1_109
ISSN
2352-5401
DOI
10.2991/978-94-6463-364-1_109How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Haris Setiawan
AU  - M. Yazid Diratama
AU  - Fajar Risnandar
AU  - Amung Amung
PY  - 2024
DA  - 2024/02/17
TI  - Post-Processor Development For 5 Axis DMG 50U Milling Machine Using Siemens NX 12 Software
BT  - Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)
PB  - Atlantis Press
SP  - 1202
EP  - 1215
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-364-1_109
DO  - 10.2991/978-94-6463-364-1_109
ID  - Setiawan2024
ER  -