Proceedings of the International Conference of Fluid Power and Mechatronic Control Engineering (ICFPMCE 2022)

<Previous Article In Volume
Next Article In Volume>

Numerical Investigation on Silt Particle Abrasion Characteristics of the Centrifugal Pump

Authors
Xiangdong Han1, Youchao Yang2, Chao Wang2, 4, Pengjun Fan3, Yaping Tian5, *
1School of Civil Engineering, Nanchang Institute of Technology, Nanchang, 330044, China
2Chongqing Pump Industry Co., Ltd., Chongqing, 400033, China
3Machine Industry Lanzhou Petrochemical Equipment Inspection Institute Co., Ltd., Lanzhou, 730070, China
4College of Aerospace and Civil Engineering, Harbin Engineering University, Harbin, 150001, China
5Gansu Water Resources and Hydroelectric Investigation and Design and Research Institute Corporation Limited, Lanzhou, 730000, China
*Corresponding author. Email: typ_pj@163.com
Corresponding Author
Yaping Tian
Available Online 7 December 2022.
DOI
10.2991/978-94-6463-022-0_21How to use a DOI?
Keywords
Silt particle mass concentration; Silt particle abrasion rate; Centrifugal pump; Numerical simulation
Abstract

Silt particle abrasion characteristics of the centrifugal pump were numerically investigated. Mean diameter of the employed silt particles was 0.025 mm and the concentration was 1%. Results indicated that for diverse pressure and suction surfaces, distributions of silt particle mass concentration were various. The distribution scope on suction surface was larger than that of the pressure surface. Silt particle abrasion rate on suction surface was greater than in the pressure surface. They were alternation change. The laws on suction surface were contrary to that of pressure surface. The investigations could provide theoretical supports for engineering applications in hydraulic machinery engineering fields.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference of Fluid Power and Mechatronic Control Engineering (ICFPMCE 2022)
Series
Atlantis Highlights in Engineering
Publication Date
7 December 2022
ISBN
10.2991/978-94-6463-022-0_21
ISSN
2589-4943
DOI
10.2991/978-94-6463-022-0_21How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Xiangdong Han
AU  - Youchao Yang
AU  - Chao Wang
AU  - Pengjun Fan
AU  - Yaping Tian
PY  - 2022
DA  - 2022/12/07
TI  - Numerical Investigation on Silt Particle Abrasion Characteristics of the Centrifugal Pump
BT  - Proceedings of the International Conference of Fluid Power and Mechatronic Control Engineering (ICFPMCE 2022)
PB  - Atlantis Press
SP  - 241
EP  - 250
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-022-0_21
DO  - 10.2991/978-94-6463-022-0_21
ID  - Han2022
ER  -