Proceedings of the International Conference on Mechanics, Materials and Mechatronics (ICM³ 2026)
International Conference on Mechanics, Materials and Mechatronics (ICM³ 2026)
📍Hyderabad, India🗓️ 23-25 March 2026
84 authors
- Abdelrahman, Ahmed Hussain Ali
- Nondestructive Structural Integrity Assessment of a Hydrogen Energy Component
- Akhtar, Sheik Shoaib
- Experimental Design and Performance Analysis of a Self-Balancing Robot Using PID Control
- Awad, Mohamed M.
- Nondestructive Structural Integrity Assessment of a Hydrogen Energy Component
- Babu, Suresh
- Design and Dynamics of Brake Systems: A Sensitivity Analysis Approach
- Bothale, Prathamesh
- Numerical and Experimental Investigation of Bolted Joints Considering the Effect of Vibration
- Brandstötter, Mathias
- Multi-Objective Topology Optimization and PID-Controlled Grasping of Compliant Fingers for Parallel Robotic Grippers
- Chakraborty, Debasis
- Peer-Review Statements
- Chatterjee, Subhradeep
- Hard Coatings on Ti-Based Materials Produced by Weld Deposition
- Dadashbaki, Farbod
- Nondestructive Structural Integrity Assessment of a Hydrogen Energy Component
- Darahas, Sanka Sai
- Experimental Design and Performance Analysis of a Self-Balancing Robot Using PID Control
- De, Manabendra Manindrakumar
- Fluid-Structure Interactions studies of a Blended Wing Body aircraft using Free and Open-Source Software based Hybrid-Fidelity Framework
- Dea, Hasanaj
- Multi-Objective Topology Optimization and PID-Controlled Grasping of Compliant Fingers for Parallel Robotic Grippers
- Deepak, B.
- Design and Simulation of an Optimized Biaxial Cruciform Specimen
- Deshmukh, Ishan S.
- Adaptive Soft Elastomeric Fingers Pneumatically Actuated Extendable and Retractable Soft Robotic Gripper
- Dhurvi, Tanvi
- Numerical and Experimental Investigation of Bolted Joints Considering the Effect of Vibration
- D’Souza, Jeane Marina
- Adaptive Soft Elastomeric Fingers Pneumatically Actuated Extendable and Retractable Soft Robotic Gripper
- Endre, Pataki Abel
- Multi-Objective Topology Optimization and PID-Controlled Grasping of Compliant Fingers for Parallel Robotic Grippers
- Ganduri, Krishna Vamshi
- Experimental Design and Performance Analysis of a Self-Balancing Robot Using PID Control
- Goel, Deepanshu
- Adaptive Soft Elastomeric Fingers Pneumatically Actuated Extendable and Retractable Soft Robotic Gripper
- Gosalia, Hem
- Adaptive Soft Elastomeric Fingers Pneumatically Actuated Extendable and Retractable Soft Robotic Gripper
- Gupta, Hemanth
- Design and Dynamics of Brake Systems: A Sensitivity Analysis Approach
- Harshin, Y. Bala Venkata
- Design and Development of a Smart Quadruped Spider Robot Using ESP32 with Obstacle Avoidance Vision-Based Face Detection and MQTT Control
- Helik, Harshil
- Comparative Analysis of Pulse Detonation Engine with Purging
- Himagireesh, Ch.
- CFD-Based Design and Optimization of Water-Cooled Battery Thermal Management System for Electric Vehicle Applications
- Hussien, Yahea Malek
- Hard Coatings on Ti-Based Materials Produced by Weld Deposition
- Jangra, Jatin
- Experimental Evaluation of Throttling Characteristics in a Radial Injector Pump‑Fed Rocket Engine
- Jindal, Tejinder Kumar
- Comparative Analysis of Pulse Detonation Engine with Purging
- Kaloop, Mosbeh R.
- Nondestructive Structural Integrity Assessment of a Hydrogen Energy Component
- Kalyan, T. Pavan
- Design and Development of a Smart Quadruped Spider Robot Using ESP32 with Obstacle Avoidance Vision-Based Face Detection and MQTT Control
- Karanam, Harshith
- Microstructural Evolution and Mechanical Anisotropy of AA6061 Fabricated by Additive Friction Stir Deposition
- Kaundinya, R. Sai
- CFD-Based Design and Optimization of Water-Cooled Battery Thermal Management System for Electric Vehicle Applications
- Krishna, M. V. S. Vamsy
- Microstructural Evolution and Mechanical Anisotropy of AA6061 Fabricated by Additive Friction Stir Deposition
- Krishnan, Rajeev R.
- Experimental Evaluation of Throttling Characteristics in a Radial Injector Pump‑Fed Rocket Engine
- Kumar, B. V. S. Arun
- CFD-Based Design and Optimization of Water-Cooled Battery Thermal Management System for Electric Vehicle Applications
- Kumar, S. Sendhil
- Numerical and Experimental Investigation of Bolted Joints Considering the Effect of Vibration
- Kumar, U. Ashok
- Microstructural Evolution and Mechanical Anisotropy of AA6061 Fabricated by Additive Friction Stir Deposition
- Lohith, Boggula
- Experimental Design and Performance Analysis of a Self-Balancing Robot Using PID Control
- Lokesh, Boggula
- Experimental Design and Performance Analysis of a Self-Balancing Robot Using PID Control
- Mahadevan, P.
- Influence of Protective Surface Coating on Heat Transfer with Aluminium Enclosers
- Majhi, Abhilash Asit Kumar
- Unit Commitment with Respect to Both Cost and Emission Based on a Day Load Demand in an Integrated Solar and Wind Power System
- Mali, Prathamesh
- Numerical and Experimental Investigation of Bolted Joints Considering the Effect of Vibration
- Manideep, Pabbisetty
- Experimental Design and Performance Analysis of a Self-Balancing Robot Using PID Control
- Mhetre, Raju
- Influence of Protective Surface Coating on Heat Transfer with Aluminium Enclosers
- Mohammed, Abdul Mateen
- Design and Simulation of an Optimized Biaxial Cruciform Specimen
- Mohanty, Sanjeeb
- Unit Commitment with Respect to Both Cost and Emission Based on a Day Load Demand in an Integrated Solar and Wind Power System
- Muktha, Saikumar
- Design and Dynamics of Brake Systems: A Sensitivity Analysis Approach
- Nadgouda, Avadhoot
- Finite Element Analysis of Lumbar Spine (L3-L5) Loading under Pothole-Induced Vibration in Powered Two-Wheelers
- Nagasree, P. Siva
- CFD-Based Design and Optimization of Water-Cooled Battery Thermal Management System for Electric Vehicle Applications
- Nakka, Sanjeevi
- Genetic Algorithm Based Optimization of Cable Attachment Geometry for Maximising Tensionable Workspace in a Planar Cable-Driven Manipulator
- Naveenkumar, M. A.
- Influence of Protective Surface Coating on Heat Transfer with Aluminium Enclosers
- Nithesh, B.
- Thermal-Mass Trade-Off Analysis of Cu-Al Bimetallic Fins in PCM-Based Battery Thermal Management
- Padmaja, P.
- Design and Development of a Smart Quadruped Spider Robot Using ESP32 with Obstacle Avoidance Vision-Based Face Detection and MQTT Control
- Pal, Subhabrato
- Comparative Analysis of Pulse Detonation Engine with Purging
- Panigrahi, Bharat B.
- Hard Coatings on Ti-Based Materials Produced by Weld Deposition
- Pathri, Bhargav Prajwal
- Experimental Design and Performance Analysis of a Self-Balancing Robot Using PID Control
- Peddiraju, Vivek C.
- Hard Coatings on Ti-Based Materials Produced by Weld Deposition
- Pichandi, Mahadevan
- Design and Dynamics of Brake Systems: A Sensitivity Analysis Approach
- Prasad, Santosh
- Finite Element Analysis of Lumbar Spine (L3-L5) Loading under Pothole-Induced Vibration in Powered Two-Wheelers
- Ram, Chuna
- Experimental Evaluation of Throttling Characteristics in a Radial Injector Pump‑Fed Rocket Engine
- Rananavare, Premjit
- Genetic Algorithm Based Optimization of Cable Attachment Geometry for Maximising Tensionable Workspace in a Planar Cable-Driven Manipulator
- Reddy, Kapil
- Influence of Protective Surface Coating on Heat Transfer with Aluminium Enclosers
- Sahu, Dibya Ranjan
- Unit Commitment with Respect to Both Cost and Emission Based on a Day Load Demand in an Integrated Solar and Wind Power System
- Saxon, Mathew
- Experimental Evaluation of Throttling Characteristics in a Radial Injector Pump‑Fed Rocket Engine
- Senthilkumar, Gowtham
- Design and Dynamics of Brake Systems: A Sensitivity Analysis Approach
- Shaik, Sohail
- Microstructural Evolution and Mechanical Anisotropy of AA6061 Fabricated by Additive Friction Stir Deposition
- Shravani, K.
- Design and Development of a Smart Quadruped Spider Robot Using ESP32 with Obstacle Avoidance Vision-Based Face Detection and MQTT Control
- Siju, V.
- Experimental Evaluation of Throttling Characteristics in a Radial Injector Pump‑Fed Rocket Engine
- Sikdar, Shirsendu
- Nondestructive Structural Integrity Assessment of a Hydrogen Energy Component
- Singh, Abhilash
- Finite Element Analysis of Lumbar Spine (L3-L5) Loading under Pothole-Induced Vibration in Powered Two-Wheelers
- Sinha, Rupesh Kumar
- Experimental Evaluation of Throttling Characteristics in a Radial Injector Pump‑Fed Rocket Engine
- Srikanth, S. C.
- Influence of Protective Surface Coating on Heat Transfer with Aluminium Enclosers
- Srinivas, Gidugu Lakshmi
- Multi-Objective Topology Optimization and PID-Controlled Grasping of Compliant Fingers for Parallel Robotic Grippers
- Sripadi, Sravan
- Experimental Design and Performance Analysis of a Self-Balancing Robot Using PID Control
- Subasree TGR
- Influence of Protective Surface Coating on Heat Transfer with Aluminium Enclosers
- Sunkara, Shivani
- Design and Development of a Smart Quadruped Spider Robot Using ESP32 with Obstacle Avoidance Vision-Based Face Detection and MQTT Control
- Suryakumar, S.
- Hard Coatings on Ti-Based Materials Produced by Weld Deposition
- Taj, Taj
- CFD-Based Design and Optimization of Water-Cooled Battery Thermal Management System for Electric Vehicle Applications
- Uppapalli, Sebastian
- Peer-Review Statements
- Vadla, Desika Sai Praneeth
- Design and Development of a Smart Quadruped Spider Robot Using ESP32 with Obstacle Avoidance Vision-Based Face Detection and MQTT Control
- Varshan, B. S. Jeyanth
- Fluid-Structure Interactions studies of a Blended Wing Body aircraft using Free and Open-Source Software based Hybrid-Fidelity Framework
- Veereshkumar
- Influence of Protective Surface Coating on Heat Transfer with Aluminium Enclosers
- Verma, Khyati
- Finite Element Analysis of Lumbar Spine (L3-L5) Loading under Pothole-Induced Vibration in Powered Two-Wheelers
- Vikram, T. Srihari
- Thermal-Mass Trade-Off Analysis of Cu-Al Bimetallic Fins in PCM-Based Battery Thermal Management
- Vinay, P. V.
- CFD-Based Design and Optimization of Water-Cooled Battery Thermal Management System for Electric Vehicle Applications