Proceedings of the 2016 7th International Conference on Mechatronics, Control and Materials (ICMCM 2016)

A Study on the Interfacial Adhesion Strength of Different Types of Calcium Carbonate Filled Poly (vinyl chloride) Composites

Authors
Chuansheng Liu, Chengbao Wu, Lieshu Lin
Corresponding Author
Chuansheng Liu
Available Online December 2016.
DOI
10.2991/icmcm-16.2016.61How to use a DOI?
Keywords
Calcium Carbonate; Polyvinyl-chloride; Composite; Mechanical Properties; Adhesion Strength
Abstract

The Polyvinyl-chloride (PVC) composites filled with micro-Calcium Carbonate (CaCO3), submicro-CaCO3, nano-CaCO3 and nano-coating micron CaCO3 powder were prepared by the method of melt blending process. The tensile properties of the PVC/CaCO3 composites were tested at the room temperature. The interfacial adhesion strength between the CaCO3 particle and the PVC matrix was measured. The results showed that the tensile properties of the PVC/CaCO3 composites were better than those of the pure PVC in the most conditions; the mechanical properties of the surface treated CaCO3 filled PVC composites were better than the ones of the non-surface treated CaCO3 filled PVC composites. The mechanical properties of the PVC composites filled with nano-coating micron heavy CaCO3 were better than the ones of the he PVC composites filled with heavy CaCO3; among the four types of CaCO3, the mechanical properties of the PVC composites filled common light CaCO3 and ultra-fine light CaCO3 were relatively better; as the interfacial interaction strength, the strength between the ultra-fine light CaCO3 and the PVC matrix was maximum, the one between the common light CaCO3 and the PVC matrix was minimum, the strength between the nano-coating micron heavy CaCO3 and the matrix was bigger than that between the micron heavy CaCO3 and the matrix, the strength between the CaCO3 after being treated and the matrix was increased.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 7th International Conference on Mechatronics, Control and Materials (ICMCM 2016)
Series
Advances in Engineering Research
Publication Date
December 2016
ISBN
978-94-6252-267-1
ISSN
2352-5401
DOI
10.2991/icmcm-16.2016.61How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Chuansheng Liu
AU  - Chengbao Wu
AU  - Lieshu Lin
PY  - 2016/12
DA  - 2016/12
TI  - A Study on the Interfacial Adhesion Strength of Different Types of Calcium Carbonate Filled Poly (vinyl chloride) Composites
BT  - Proceedings of the 2016 7th International Conference on Mechatronics, Control and Materials (ICMCM 2016)
PB  - Atlantis Press
SP  - 302
EP  - 306
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmcm-16.2016.61
DO  - 10.2991/icmcm-16.2016.61
ID  - Liu2016/12
ER  -