The Effect of CuO addition on low temperature co-firing PZT ferroelectric ceramics in multilayer device application
Authors
Xiumei Shi, Tao Zeng, Hong Cui, Lijun Zhang
Corresponding Author
Xiumei Shi
Available Online November 2016.
- DOI
- 10.2991/icmia-16.2016.83How to use a DOI?
- Keywords
- PZT95/5 ceramics; ferroelectric properties; CuO; piezoelectric properties
- Abstract
Low-temperature sintering of Pb0.995Cd0.005(Zr0.965Ti0.035)O3 ceramics was investigated using CuO as a sintering aid. Effect of CuO addition on the sinter ability, microstructure, and electric properties of PZT ceramics were systematically studied. The addition of CuO significantly promoted the densification of PZT and reduced the sintering temperature of PZT ceramics to 1050°C. PZT ceramics with CuO addition were sintered at 1150°C and exhibit a high density of 7.6g/cm3, which corresponds to the approximately 96% theoretical density. And the optimized value for the piezoelectric coefficient d33 of 66 pC/N was obtained for 0.05% CuO-added PZT ceramics, which shows a great promise for multilayer actuator applications.
- Copyright
- © 2016, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Xiumei Shi AU - Tao Zeng AU - Hong Cui AU - Lijun Zhang PY - 2016/11 DA - 2016/11 TI - The Effect of CuO addition on low temperature co-firing PZT ferroelectric ceramics in multilayer device application BT - Proceedings of the 2016 5th International Conference on Measurement, Instrumentation and Automation (ICMIA 2016) PB - Atlantis Press SN - 1951-6851 UR - https://doi.org/10.2991/icmia-16.2016.83 DO - 10.2991/icmia-16.2016.83 ID - Shi2016/11 ER -