Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)

<Previous Article In Volume
Next Article In Volume>

Advanced Design Optimization Procedures for Worm Gear Drives

Authors
Antoaneta Dobreva1, *, Vasko Dobrev1, Gergana Mollova1
1University of Ruse, Ruse, Bulgaria
*Corresponding author. Email: adobreva@uni-ruse.bg
Corresponding Author
Antoaneta Dobreva
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-152-4_15How to use a DOI?
Keywords
Worm Gear Drive; Design Optimization procedures; Significant Mechanical constraints
Abstract

Concerning the optimization design of worm drives, it is especially important to achieve maximum output power of the gear set, which depends particularly intensively on the efficiency coefficient of the worm gear meshing. The purpose of the study presented is to create advanced design optimization procedures concerning the output power of the worm gear, taking into account nine design variable parameters and several significant mechanical constraints. The variable parameters selected are: number of starts for the worm, number of teeth of the worm gear, center distance, sliding speed and friction coefficient for the meshing, lead and tooth friction angles, permissible contact stresses for the pair of worm and worm gear materials, appropriate values of the safety factors. The research methodology applied includes four different stages, which are briefly described. The research results obtained are analyzed. The conclusions and recommendations deduced are related and focused to the objectives of future research work of the author’s team.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
978-94-6463-152-4
ISSN
2589-4943
DOI
10.2991/978-94-6463-152-4_15How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Antoaneta Dobreva
AU  - Vasko Dobrev
AU  - Gergana Mollova
PY  - 2023
DA  - 2023/05/30
TI  - Advanced Design Optimization Procedures for Worm Gear Drives
BT  - Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
PB  - Atlantis Press
SP  - 131
EP  - 137
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-152-4_15
DO  - 10.2991/978-94-6463-152-4_15
ID  - Dobreva2023
ER  -