Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)

<Previous Article In Volume
Next Article In Volume>

Study of the Stop Phenomena at the End Sliding Plate Movement with Reciprocating Rectilinear Motion Driven by Direct Current Motors

Authors
Adrian Cernăianu1, *, Corina Cernăianu1, Eugenia Stăncuț1
1Faculty of Mechanics, University of Craiova, Craiova, Romania
*Corresponding author. Email: adrian.cernaianu@edu.ucv.ro
Corresponding Author
Adrian Cernăianu
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-152-4_44How to use a DOI?
Keywords
Alternating rectilinear motion; Elimination stop phenomena; DC motor drive; Stepper drive; Measurement
Abstract

The paper aims to present a series of applied studies on specific phenomena, which occurred when stopping the mobile sledge-type subassemblies with reciprocating rectilinear motion. These phenomena can influence the accuracy of the movements necessary for the technological processes of processing on machinery and manufacturing equipment through mechanical processing. For the study, a sledge-guide device was designed, made and tested, with the actuation of the mobile element by means of an electro-mechanical transmission. Two drive variants were used, with DC motor and stepper motor driven by an Arduino controller. The curves of the variation of the displacements were recorded and drawn, by means of a recording device, in different actuation variants and the obtained results were interpreted. In order to be able to develop as comprehensive conclusions as possible on these specific phenomena, several process parameters, such as the speed of travel or the travel of the moving element, have been modified using actuators and control of the drive components. Significant differences were found in the data obtained, both in terms of the limits of variation of the process parameters and in terms of the solution chosen for operation.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
978-94-6463-152-4
ISSN
2589-4943
DOI
10.2991/978-94-6463-152-4_44How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Adrian Cernăianu
AU  - Corina Cernăianu
AU  - Eugenia Stăncuț
PY  - 2023
DA  - 2023/05/30
TI  - Study of the Stop Phenomena at the End Sliding Plate Movement with Reciprocating Rectilinear Motion Driven by Direct Current Motors
BT  - Proceedings of the International Conference of Mechanical Engineering (ICOME-2022)
PB  - Atlantis Press
SP  - 398
EP  - 406
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-152-4_44
DO  - 10.2991/978-94-6463-152-4_44
ID  - Cernăianu2023
ER  -