Study of Scale and Corrosion Inhibition Performances of Polyaspartic Acid
- https://doi.org/10.2991/icsmim-15.2016.123How to use a DOI?
- Polyaspartic acid. Scale inhibition. Corrosion inhibition. Circulating cooling water
In this article, the scale and corrosion inhibition performances of Polyaspartic acid (PASP) and PASP-based composite were studied. The results showed the single PASP has good scale and corrosion inhibition performances, but the quantity of PASP used for corrosion inhibition is large (100mg/L). To reduce cost, PASP-based composite was prepared from PASP, BTA, sodium tungstate and sodium gluconate with different scales. The optimal proportioning mass ratio is as follows: PASP : BTA : sodium tungstate : sodium gluconate is 10 : 0.5 : 20 : 10 (total concentration: 40.5 mg/L). Experimental results showed the corrosion rate of HSn-70A copper is only 0.0006 mm/a and corresponding corrosion inhibiting rate reaches 99.22%. The small dynamic simulation showed that inhibition rate of this PASP-based composite can reach more than 90% even in high hardness and concentration.
- © 2016, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Yushan Cheng AU - Yanmin Chen AU - Yincong Sun PY - 2016/01 DA - 2016/01 TI - Study of Scale and Corrosion Inhibition Performances of Polyaspartic Acid BT - Proceedings of the 2015 4th International Conference on Sensors, Measurement and Intelligent Materials PB - Atlantis Press SP - 658 EP - 664 SN - 2352-538X UR - https://doi.org/10.2991/icsmim-15.2016.123 DO - https://doi.org/10.2991/icsmim-15.2016.123 ID - Cheng2016/01 ER -