Effect of lamination parameters on deformation energy of LTCC substrate based on Finite element analysis

DOI

10.2991/isrme-15.2015.317How to use a DOI?

Keywords

LTCC; Finite Element Analysis; Process Parameter; Deformation Energy.

Abstract

In this paper, the temperature, time and pressure of the three process parameters were selected as three control factors of the low temperature co fired ceramic (LTCC) substrate laminating process. By using an L9 (33) orthogonal array which have 9 different process parameters' levels combinations were designed. The finite element analysis model of the LTCC substrate were established by using the finite element software ANSYS. The LTCC substrate was analyses by the method that thermal structural coupled finite element analysis under the different process parameters. The substrate deformation energy was calculated. Based on the deformation energy of different process parameters combination, the range analysis was performed. The results show that temperature is the dominant factor in effecting on deformation energy, holding time secondly and pressure at last; temperature 70 , time 10min and pressure 25Mpa can reduce the substrate deformation and obtain excellent interlayer bonding effect. Combined with the references experimental results, the authors validate the conclusions are correct.

Copyright

© 2015, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Liyu Li
AU  - Zhaohua Wu
PY  - 2015/04
DA  - 2015/04
TI  - Effect of lamination parameters on deformation energy of LTCC substrate based on Finite element analysis
BT  - Proceedings of the 2015 International Conference on Intelligent Systems Research and Mechatronics Engineering
PB  - Atlantis Press
SP  - 1569
EP  - 1572
SN  - 1951-6851
UR  - https://doi.org/10.2991/isrme-15.2015.317
DO  - 10.2991/isrme-15.2015.317
ID  - Li2015/04
ER  -