Proceedings of the 2016 6th International Conference on Mechatronics, Computer and Education Informationization (MCEI 2016)

The Research on Heat Treatment Technology of Ni - Mo - P Electroless Plating

Authors
Jinkui Cao, Huahui Yi, Zhengcheng Zhang
Corresponding Author
Jinkui Cao
Available Online December 2016.
DOI
https://doi.org/10.2991/mcei-16.2016.254How to use a DOI?
Keywords
Heat treatment; Ni-Mo-P electroless plating; Hardness; Uniform design
Abstract
In this paper, study on the Ni-Mo-P electroless plating which are heat treated with different time and temperature. Test and record the hardness of coatings by the micro-hardness tester. Modeling analysis and optimize the parameters of the coating hardness by uniform design methods. The results indicate that under the same experiment parameters, the maximum hardness of the Ni-Mo-P electroless plating are mainly effect by the heating time and temperature. The hardness decrease when the heat temperature is over high and heating over long time. Got the hardest coating after the heat treatment technology of 380 ~ 400 for 3 h.
Open Access
This is an open access article distributed under the CC BY-NC license.

Download article (PDF)

Proceedings
2016 6th International Conference on Mechatronics, Computer and Education Informationization (MCEI 2016)
Part of series
Advances in Intelligent Systems Research
Publication Date
December 2016
ISBN
978-94-6252-282-4
ISSN
1951-6851
DOI
https://doi.org/10.2991/mcei-16.2016.254How to use a DOI?
Open Access
This is an open access article distributed under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - Jinkui Cao
AU  - Huahui Yi
AU  - Zhengcheng Zhang
PY  - 2016/12
DA  - 2016/12
TI  - The Research on Heat Treatment Technology of Ni - Mo - P Electroless Plating
BT  - 2016 6th International Conference on Mechatronics, Computer and Education Informationization (MCEI 2016)
PB  - Atlantis Press
SP  - 1240
EP  - 1244
SN  - 1951-6851
UR  - https://doi.org/10.2991/mcei-16.2016.254
DO  - https://doi.org/10.2991/mcei-16.2016.254
ID  - Cao2016/12
ER  -