Influence of Al Concentration on the High Temperature Cyclic Oxidation Resistance Behavior of Fe-15Cu Alloys

DOI

10.2991/mebe-15.2015.93How to use a DOI?

Keywords

high temperature oxidation resistance; Fe-15Cu; Al concentration; the oxide film

Abstract

The cyclic oxidation behaviors of Fe-15Cu alloys with different Al concentration at 800 oC were studied. The oxidation kinetics showed that the oxidation process of Fe-15Cu alloys followed the parabolic law, Fe-15Cu-5Al alloy was oxidized more seriously than that of Fe-15Cu-15Al alloy. Analysis of the XRD results indicated that the oxides obtained on the lower Al concentration alloy was more complicated and the matrix metals were oxidized heavily, on the other side, the oxides obtained on the surface of Fe-15Cu-15Al alloy were simple, while the Al2O3 broke off from the surface, there were mainly pure matrix metals left as detected by the XRD and the SEM methods. The higher Al concentration gave the higher oxidation resistance of the alloy, but the adhesion of the protective Al2O3 should be improved in the next work.

Copyright

© 2015, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Lingyun Bai
AU  - Xianchao Xu
AU  - Junhuai Xiang
AU  - Songping Wang
AU  - Ting Wang
PY  - 2015/04
DA  - 2015/04
TI  - Influence of Al Concentration on the High Temperature Cyclic Oxidation Resistance Behavior of Fe-15Cu Alloys
BT  - Proceedings of the 2015 International Conference on Materials, Environmental and Biological Engineering
PB  - Atlantis Press
SP  - 396
EP  - 399
SN  - 2352-5401
UR  - https://doi.org/10.2991/mebe-15.2015.93
DO  - 10.2991/mebe-15.2015.93
ID  - Bai2015/04
ER  -