Proceedings of the First Mandalika International Multi-Conference on Science and Engineering 2022, MIMSE 2022 (Mechanical and Electrical) (MIMSE-M-E-I-2022)

<Previous Article In Volume
Next Article In Volume>

The Minimum Fluidization Velocity of Drying Corn in Fluidized Bed

Authors
Syahrul Syahrul1, *, Rudy Sutanto1, Arif Mulyanto1, Hendry Sakke Tira1, Made Wirawan1, Ayatullah Ayatullah1
1The University of Mataram, Mataram, Indonesia
*Corresponding author. Email: h.syahrul@unram.ac.id
Corresponding Author
Syahrul Syahrul
Available Online 26 December 2022.
DOI
10.2991/978-94-6463-078-7_4How to use a DOI?
Keywords
Fluidized; corn; drying
Abstract

Grains are agricultural products that often experience post-harvest damage, one of which is corn. Based on the standard SNI 014483–1998 quality requirements that must be met by corn is to have a moisture content of 14%. To maintain the quality and value of agricultural products, the drying method is used. In general, post-harvest drying is only done naturally by drying using heat from solar energy or commonly called conventional drying. In this study, the drying process used a fluidized bed dryer. The purpose of this study was to determine the minimum fluidization velocity of corn in fluidized bed drying. In this research the minimum fluidization velocity was 4.10 m/s.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the First Mandalika International Multi-Conference on Science and Engineering 2022, MIMSE 2022 (Mechanical and Electrical) (MIMSE-M-E-I-2022)
Series
Advances in Engineering Research
Publication Date
26 December 2022
ISBN
10.2991/978-94-6463-078-7_4
ISSN
2352-5401
DOI
10.2991/978-94-6463-078-7_4How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Syahrul Syahrul
AU  - Rudy Sutanto
AU  - Arif Mulyanto
AU  - Hendry Sakke Tira
AU  - Made Wirawan
AU  - Ayatullah Ayatullah
PY  - 2022
DA  - 2022/12/26
TI  - The Minimum Fluidization Velocity of Drying Corn in Fluidized Bed
BT  - Proceedings of the First Mandalika International Multi-Conference on Science and Engineering 2022, MIMSE 2022 (Mechanical and Electrical) (MIMSE-M-E-I-2022)
PB  - Atlantis Press
SP  - 25
EP  - 29
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-078-7_4
DO  - 10.2991/978-94-6463-078-7_4
ID  - Syahrul2022
ER  -