International Journal of Computational Intelligence Systems

Volume 4, Issue 3, May 2011, Pages 337 - 344

Optimization and Simulation of Machining Parameters in Radial-axial Ring Rolling Process

Authors
Shuiyuan Tang, Jiping Lu, Hongli Fan, Ruizhao Du, Zhonghua Jian, Ning Ma
Corresponding Author
Shuiyuan Tang
Available Online 20 May 2011.
DOI
https://doi.org/10.2991/ijcis.2011.4.3.7How to use a DOI?
Abstract
Ring rolling is a complicated process, in which rolling parameters influence directly the quality of ring. It is a process method with high productivity and few waste of material, widely used in transportation industry including automotive, shipbuilding, aerospace etc. During the rolling process of large-sized parts, crinkle and hollows often appear on surface, due to inconsistence of rolling motions with the deformation of ring part. Based on radial-axial ring rolling system configuration, motions and forces in rolling process are analyzed, and a dynamic model is formulated. Error of ring's end flatness and roundness are defined as the characteristic parameters of ring quality. The relationship between core roller feed speed, drive roller speed, the upper taper roller feed speed, and quality of ring part are analyzed. The stress and strain of the part are simulated in the Finite Element Method by DEFORM software. The simulation results provide a reference for the definition of ring rolling process parameters. It is able to make the deformation of the part be consistent with the process parameters, and improve product quality considerably.
Open Access
This is an open access article distributed under the CC BY-NC license.

Download article (PDF)

Journal
International Journal of Computational Intelligence Systems
Volume-Issue
4 - 3
Pages
337 - 344
Publication Date
2011/05
ISSN (Online)
1875-6883
ISSN (Print)
1875-6891
DOI
https://doi.org/10.2991/ijcis.2011.4.3.7How to use a DOI?
Open Access
This is an open access article distributed under the CC BY-NC license.

Cite this article

TY  - JOUR
AU  - Shuiyuan Tang
AU  - Jiping Lu
AU  - Hongli Fan
AU  - Ruizhao Du
AU  - Zhonghua Jian
AU  - Ning Ma
PY  - 2011
DA  - 2011/05
TI  - Optimization and Simulation of Machining Parameters in Radial-axial Ring Rolling Process
JO  - International Journal of Computational Intelligence Systems
SP  - 337
EP  - 344
VL  - 4
IS  - 3
SN  - 1875-6883
UR  - https://doi.org/10.2991/ijcis.2011.4.3.7
DO  - https://doi.org/10.2991/ijcis.2011.4.3.7
ID  - Tang2011
ER  -