Proceedings of the 2nd International Conference on Advances in Mechanical Engineering and Industrial Informatics (AMEII 2016)

Determination of Main Laser Processing Technical Parameters in Wood Manufacturing

Authors
Honggang Zhao, Junhua Wu, Yanlong Liu, YaoXing Sun
Corresponding Author
Honggang Zhao
Available Online April 2016.
DOI
https://doi.org/10.2991/ameii-16.2016.171How to use a DOI?
Keywords
laser cutting, Larch, process parameter, 3D graph
Abstract

According to the laser cutter larch, this study has determined the reasonable process parameters such as focal length, light intensity, and optimized laser processing technology parameters to provide test methods. Firstly, for the cutting seam state analysis the precautions of software settings have been put forward. General rules of variations of process parameters in laser technology were determined through the orthogonal test method, and designs a three-dimensional curves, to observe the interaction of different factors, and then used two factor completely random repeat test method, to determine the reasonable parameters of intensity, The results showed that the reasonable process parameters: focal length is 6mm and focal intensity is 32% or the focal length is 6.5mm and focal intensity is 50%, last the cutting seam depth is about 5~6mm.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2nd International Conference on Advances in Mechanical Engineering and Industrial Informatics (AMEII 2016)
Series
Advances in Engineering Research
Publication Date
April 2016
ISBN
978-94-6252-188-9
ISSN
2352-5401
DOI
https://doi.org/10.2991/ameii-16.2016.171How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Honggang Zhao
AU  - Junhua Wu
AU  - Yanlong Liu
AU  - YaoXing Sun
PY  - 2016/04
DA  - 2016/04
TI  - Determination of Main Laser Processing Technical Parameters in Wood Manufacturing
BT  - Proceedings of the 2nd International Conference on Advances in Mechanical Engineering and Industrial Informatics (AMEII 2016)
PB  - Atlantis Press
SP  - 884
EP  - 888
SN  - 2352-5401
UR  - https://doi.org/10.2991/ameii-16.2016.171
DO  - https://doi.org/10.2991/ameii-16.2016.171
ID  - Zhao2016/04
ER  -