Development of Bamboo Materials for Body Speed Boat Application
- DOI
- 10.2991/978-94-6463-284-2_10How to use a DOI?
- Keywords
- Bamboo; Composite; Body Speed Boat
- Abstract
The research of natural fibers in various engineering fields is currently developing, because of its availability, easy to process according to its designation, low-cost, good mechanical and physical properties and is friendly to the environment. The use of bamboo (bamboo strip reinforced/BSR) material with a laminate system, for the manufacture of speed boats is a promising alternative material. The bamboo used is the Andong Bamboo (Gigantochloa pseudoarundinacea) for the manufacture of its skin, the bamboo material is widely available in Indonesia. To ensure that the bamboo material used can meet the requirements of mechanical properties as a material for making Speed Boats with Hand Lay Up Laminate system and a Composite system, an analysis is carried out on the results of testing tensile strength, bending strength, modulus of elasticity and specific gravity of the materials. There are Fibreglass Reinforced Polymer (FRP), Fibre Bamboo Reinforced Polymer (FBR), Bamboo Strip Reinforced for Outer Part (BSR;OP), and Bamboo Strip Reinforced for Middle Part (BSR;MP). The next step is to compare the results of the tensile strength, bending strength, modulus of elasticity and specific gravity of the bamboo raw material to the Fiberglass Reinforced Polymer (FRP) composite material. As the standards used for tensile, bending, elastic modulus and material density tests are the Rules for Fiberglass Reinforced Plastic Ship 2016 and the BKI Regulation, the 2016 Regulations for Classification and Construction of Wooden Ships set by the Indonesian Classification Bureau for Speed Boat building materials, ISO 527-4 and ISO 14125. From the test results, the type of material that has the best mechanical characteristics will be selected to be used as an alternative raw material for shipbuilding/speed boat, will be a source of information for the preparation of rules related to shipbuilding/speed boot from bamboo material. The use of bamboo material as a material for making ships/speed boats will make the body lighter and increase load capacity, reduce or even eliminate the use of Fiberglass Reinforced Polymer (FRP) material which is the cause of pollutant in waters: rivers, lakes and seas.
- Copyright
- © 2023 The Author(s)
- Open Access
- Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
Cite this article
TY - CONF AU - Andi Lamappasessu AU - Dwi Rahmalina PY - 2023 DA - 2023/11/09 TI - Development of Bamboo Materials for Body Speed Boat Application BT - Proceedings of the 4th Borobudur International Symposium on Science and Technology 2022 (BIS-STE 2022) PB - Atlantis Press SP - 71 EP - 78 SN - 2352-5401 UR - https://doi.org/10.2991/978-94-6463-284-2_10 DO - 10.2991/978-94-6463-284-2_10 ID - Lamappasessu2023 ER -