Proceedings of the International Scientific and Practical Conference "Young Engineers of the Fuel and Energy Complex: Developing the Energy Agenda of the Future" (EAF 2021)

<Previous Article In Volume
Next Article In Volume>

Development of a Method of Fault Location in a 6 kV Network for a Digital Platform of Intelligent Services of an Electric Grid Company

Authors
Andrey Mozokhin1, *, Valery Soldatov2
1Department of Automation and Microprocessor Technology, Kostroma State University, Kostroma city, Kostroma region, Russia
2Department of Information Technologies in Power Engineering, Kostroma State Agricultural Academy, Karavaevo village, Kostroma region, Russia
*Corresponding author. Email: mozokhinandrey@gmail.com
Corresponding Author
Andrey Mozokhin
Available Online 24 March 2022.
DOI
10.2991/aer.k.220308.012How to use a DOI?
Keywords
Fault location; Electrical network; Digital platform; Intelligent service
Abstract

The article proposes a modern method of fault location for 6 kV networks according to empirical criteria for different types of emergency modes. When developing the criteria, the modules of phase voltages and currents at the beginning of the line, at the end of the line, and both at the beginning and at the end of the 6 kV line were used. It has shown that the error of the fault location method with one-sided measurement is below 6.71 %, except for the fault modes “ground fault with subsequent breakage” and “two-phase short-circuit”. However, while using double-sided metering at the beginning and end of the line, all of the emergency modes considered are identified, with a method error of below 4%.

A modern hierarchical structure of the automated process control system of an electric grid company is proposed, according to which at each control level an intelligent module is provided, allowing to integrate the local system into a common trusted software environment for the purpose of operational management in current and emergency situations. The model of information flows of the digital integration platform as a common trusted software environment for the automated control systems of the electric grid company was developed. In the MathCad environment the method of fault location using empirical criteria is implemented, designed to support the decision of the grid control centre dispatcher in current and emergency situations.

Copyright
© 2022 The Authors. Published by Atlantis Press International B.V.
Open Access
This is an open access article under the CC BY-NC license.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Scientific and Practical Conference "Young Engineers of the Fuel and Energy Complex: Developing the Energy Agenda of the Future" (EAF 2021)
Series
Advances in Engineering Research
Publication Date
24 March 2022
ISBN
10.2991/aer.k.220308.012
ISSN
2352-5401
DOI
10.2991/aer.k.220308.012How to use a DOI?
Copyright
© 2022 The Authors. Published by Atlantis Press International B.V.
Open Access
This is an open access article under the CC BY-NC license.

Cite this article

risenwbib
TY  - CONF
AU  - Andrey Mozokhin
AU  - Valery Soldatov
PY  - 2022
DA  - 2022/03/24
TI  - Development of a Method of Fault Location in a 6 kV Network for a Digital Platform of Intelligent Services of an Electric Grid Company
BT  - Proceedings of the International Scientific and Practical Conference "Young Engineers of the Fuel and Energy Complex: Developing the Energy Agenda of the Future" (EAF 2021)
PB  - Atlantis Press
SP  - 71
EP  - 76
SN  - 2352-5401
UR  - https://doi.org/10.2991/aer.k.220308.012
DO  - 10.2991/aer.k.220308.012
ID  - Mozokhin2022
ER  -