Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering

Comprehensive Improvement Technology Research on Marine Shot Blasting Machine

Authors
Junlai Li, Yonghe Xie
Corresponding Author
Junlai Li
Available Online August 2015.
DOI
10.2991/ic3me-15.2015.409How to use a DOI?
Keywords
Shot blasting machine; Impeller head; Pretreatment
Abstract

The number of impeller head is short in the original shot blasting machine, and the distance between the pretreatment of steel plate is too far to have enough rust removal ability. Based on these problems, researchers respectively added one impeller head both on the top and bottom of the machine, shortened the underside installation height, and adjusted the angle of impeller heads. The practice proved that the new improved shot blasting machine was satisfied with the requirement of the pretreatment.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
August 2015
ISBN
10.2991/ic3me-15.2015.409
ISSN
2352-5401
DOI
10.2991/ic3me-15.2015.409How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Junlai Li
AU  - Yonghe Xie
PY  - 2015/08
DA  - 2015/08
TI  - Comprehensive Improvement Technology Research on Marine Shot Blasting Machine
BT  - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
PB  - Atlantis Press
SP  - 2134
EP  - 2139
SN  - 2352-5401
UR  - https://doi.org/10.2991/ic3me-15.2015.409
DO  - 10.2991/ic3me-15.2015.409
ID  - Li2015/08
ER  -