Resistance Spot Welding between Steel and Aluminum Alloy
- https://doi.org/10.2991/icadme-15.2015.152How to use a DOI?
- Aluminum alloy; Mild steel; Resistance spot welding
Aluminum alloy A6061 and mild steel Q235 sheets were welded by resistance spot welding. The interfacial microstructure was observed and the feature and distribution of the interfacial reactant were analyzed and the effects of welding current on the nugget size and tensile shear strength of the joint were investigated. The results indicate that both the tensile shear strength and nugget diameter of the joint increase with the increasing of welding current in some degree. When welding current exceeds a certain range, the nugget diameter of the joint tends towards stability and the tensile shear strength decreases. The joint with the maximum tensile shear load of 1.5 kN is obtained at the condition of 12 kA welding current. The interfacial reaction layer thickness decreased from central joints region to surrounding area.
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Lihu Cui AU - Ranfeng Qiu AU - Longlong Hou AU - Zhongbao Shen AU - Qingzhe Li PY - 2015/10 DA - 2015/10 TI - Resistance Spot Welding between Steel and Aluminum Alloy BT - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering PB - Atlantis Press SP - 777 EP - 781 SN - 2352-5401 UR - https://doi.org/10.2991/icadme-15.2015.152 DO - https://doi.org/10.2991/icadme-15.2015.152 ID - Cui2015/10 ER -