Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

Study on the influence of Paint-removal Process on the performance of the used parts for remanufacturing

Authors
Pin-Pin Qin, Dai-Xiang Jiang, Lu-Lin Wang, Xi-Qiu Pan, Chui-Ce Che
Corresponding Author
Pin-Pin Qin
Available Online October 2015.
DOI
https://doi.org/10.2991/icadme-15.2015.163How to use a DOI?
Keywords
Remanufacturing; Cleaning; Paint-removal; High temperature decomposition
Abstract

Cleaning is an important procedure of used parts remanufacturing process and the paint-removal on the surface of used parts is a difficulty during cleaning process. The surface paint of three materials cast iron HT250, cast steel ZG270-500, and carburizing and quenching steel 20CrMnTi were cleaned by high temperature decomposition process in this paper. Before and after cleaning, the dimensional accuracy, microstructure and hardness of the three materials were compared and analyzed. The results showed that high temperature decomposition has no effect on dimensional accuracy, microstructure and hardness of cast iron and cast steel. However, the microstructure of the carburizing and quenching steel has a phase change, and the hardness decreases sharply. Therefore, it is concluded that high temperature decomposition process is an effective method removing paint on the surface of casting iron and cast steel metal used parts, but not for carburizing and quenching steel.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
978-94-6252-113-1
ISSN
2352-5401
DOI
https://doi.org/10.2991/icadme-15.2015.163How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Pin-Pin Qin
AU  - Dai-Xiang Jiang
AU  - Lu-Lin Wang
AU  - Xi-Qiu Pan
AU  - Chui-Ce Che
PY  - 2015/10
DA  - 2015/10
TI  - Study on the influence of Paint-removal Process on the performance of the used parts for remanufacturing
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 846
EP  - 851
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.163
DO  - https://doi.org/10.2991/icadme-15.2015.163
ID  - Qin2015/10
ER  -