Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

The mechanical properties of 1060 aluminum joint by continuous drive friction welding

Authors
Qingzhe Li, Ranfeng Qiu, Zhongbao Shen, Longlong Hou, Lihu Cui
Corresponding Author
Qingzhe Li
Available Online October 2015.
DOI
https://doi.org/10.2991/icadme-15.2015.166How to use a DOI?
Keywords
Friction welding, Aluminum, Mechanical properties
Abstract

Pure aluminum was welded by friction welding in this study. Friction welding of pure aluminum was performed in the fixed upset pressure and friction pressure respectively. The tensile strength of joints was measured. According to the studies performed, pure aluminum welding effect of welding parameters on the tensile strength, friction pressure and upset pressure are the 3.5kN, the maximum tensile load of the welded joint, joint strength, 29.1kN. Parameter influence on deformation of joints, pressure and friction presses increase, such that the displacement increases, excessive wear and flanging on the adverse effects on material properties. The results have revealed a successful joint. Therefore pure aluminum in friction pressure is 2kN, upset pressure is 2kN, friction is 2.5s, can get sound joint.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
978-94-6252-113-1
ISSN
2352-5401
DOI
https://doi.org/10.2991/icadme-15.2015.166How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Qingzhe Li
AU  - Ranfeng Qiu
AU  - Zhongbao Shen
AU  - Longlong Hou
AU  - Lihu Cui
PY  - 2015/10
DA  - 2015/10
TI  - The mechanical properties of 1060 aluminum joint by continuous drive friction welding
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 864
EP  - 868
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.166
DO  - https://doi.org/10.2991/icadme-15.2015.166
ID  - Li2015/10
ER  -