Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

Feasibility of Cladding Ti to Carbon Steel by Diffusion Bonding Followed by Hot-rolling

Authors
S.R. Ke, X.H. Xu, Z.D. Xiang
Corresponding Author
S.R. Ke
Available Online October 2015.
DOI
10.2991/icadme-15.2015.363How to use a DOI?
Keywords
Ti-clad steel; Diffusion bonding; Hot-rolling; Carbon steel; Heat treatment.
Abstract

Ti was diffusion-bonded to a grade of carbon steel containing about 0.13 wt% C. The diffusion- bonded specimen was then hot-rolled to a final reduction in thickness of about 71 %. There were no delaminations during hot-rolling. The cross sectional microstructures of specimens before and after hot-rolling were characterised using scanning electron microscopy, energy dispersive spectroscopy and optical microscopy. It was proved that it is technically feasible to produce Ti-clad carbon steel plates using a process of diffusion bonding followed by hot-rolling. It was also demonstrated that normal heat treatment procedures involving quenching and tempering can be applied to Ti-clad carbon steels after hot-rolling. The bond strength of the claddings would be determined by the intermetallic compound phases formed at the interface between Ti and carbon steel, which could be optimised by adjusting the conditions of diffusion bonding and hot rolling processes.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
978-94-6252-113-1
ISSN
2352-5401
DOI
10.2991/icadme-15.2015.363How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - S.R. Ke
AU  - X.H. Xu
AU  - Z.D. Xiang
PY  - 2015/10
DA  - 2015/10
TI  - Feasibility of Cladding Ti to Carbon Steel by Diffusion Bonding Followed by Hot-rolling
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 1961
EP  - 1965
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.363
DO  - 10.2991/icadme-15.2015.363
ID  - Ke2015/10
ER  -