Proceedings of the International Conference on Current Problems in Engineering and Applied Sciences (ICCPEAS 2025)
346 authors
- Maharramova, M. H.
- Technological Basis of Conversion of Plant Wastes to Into Food Products
- Mahmud, Maisha
- Feature Ranking for Predicting Occupant Visual Comfort in Hospital Lobby Using Artificial Neural Networks (ANNs)
- Majnunlu, Umide
- Study on the Biochemical Composition of Defatted Residues Derived from Grape Seeds in the Winemaking Industry
- Mamiş, M. Salih
- Electromagnetic Fault Analysis of a Power Transformer Using Ansys@ Maxwell
- Mamiş, M. Salih
- Integrated Maxwell–Twin Builder Co-Simulation for Transformer Fault and Reclosing Analysis
- Mammadli, Arzu
- Study of the Radiation Resistance of Silicon Photomultipliers
- Mammadov, A. A.
- Liquid-Phase Catalytic Oxidation of Alkenyl and Cycloalkenyl Aromatic Hydrocarbons with Hydrogen Peroxide
- Mammadov, Adil
- Future Challenges in Water Control to Ensure the Long-term Development of Oilfield Assets
- Mammadov, Bahruz
- Future Challenges in Water Control to Ensure the Long-term Development of Oilfield Assets
- Mammadov, Ruslan
- Exploring Hybrid Energy Systems for Demand-Responsive Coordination Between Solar and Conventional Power Sources
- Mammadova, Aynur
- Effect of Nano-Fillers on the Mechanical, Thermal, and Morphological Properties of Elastomer Composites: A Comparative Study of Silica, Graphene, Nano-Clay and Carbon Nanotubes
- Mammadova, Aynur
- Reactive Compatibilization of EPDM/NBR Blends via Glycidyl Methacrylate Grafting: Effect on Interfacial Adhesion and Mechanical Performance
- Mammadova, Aynur
- Development of Biodegradable PLA-Based Colorimetric Films Incorporating Red Cabbage Anthocyanin for Real-time Food Freshness Monitoring
- Mammadova, Chinare A.
- Azo Derivative of Pyrogallol as a New Reagent for Spectrophotometric Determination of Molybdenum
- Mammadova, Guljannat
- Influence of SBR Content on the Mechanical, Thermal, and Morphological Behavior of NR–SBR Rubber Composites
- Mammadova, H. I.
- Structural and Optical Properties of P-type Cuprous Oxide (p-Cu₂O) Thin Films Prepared by Chemical Deposition
- Mammadova, Halila
- Safety and Risk Management in Wine Production
- Mammadova, Khadija
- The Impact of Climate Change on Vineyard Altitude
- Mammadova, Rasmiyya
- Effect of Nano-Fillers on the Mechanical, Thermal, and Morphological Properties of Elastomer Composites: A Comparative Study of Silica, Graphene, Nano-Clay and Carbon Nanotubes
- Mammadova, Turan
- Peer-Review Statements
- Mammadova, Ulduz
- Optimization of Semiconductor Monitoring via Residual-Based Computational and Statistical Methods
- Mammadzada, Rahim
- Exploring Hybrid Energy Systems for Demand-Responsive Coordination Between Solar and Conventional Power Sources
- Maqsudova, Sevil A.
- Azo Derivative of Pyrogallol as a New Reagent for Spectrophotometric Determination of Molybdenum
- Mehdizade, M. V.
- The Interplay of Cathodic Protection Failure and Hydro-Abrasive Wear in Offshore Electrical Submersible Pumps: A Disassembly-Based Analysis
- Mehrabova, Matanat
- Effects of Bentonite on the Dielectric Properties of High- Pressure Polyethylene
- Mekhrabov, Amdulla
- Peer-Review Statements
- Mekhtiyeva, S. I.
- Structural and Optical Properties of P-type Cuprous Oxide (p-Cu₂O) Thin Films Prepared by Chemical Deposition
- Mikayilov, Vugar
- Study on the Biochemical Composition of Defatted Residues Derived from Grape Seeds in the Winemaking Industry
- Minare, Hasanova
- Impact of Environmental Factors on ex situ Phanerophytes
- Mirzayev, G.
- Macrozoobenthos of the Coastal Waters of the Azerbaijani Sector of the South Caspian
- Mohammed, Belhadj
- Maximizing PV Efficiency:A Combined Approach Using Reflectors and Heat Exchanger
- Mohammed, Qusay H.
- A Review on: Enhancement of Mechanical Properties of Al₂O₃-TiO₂/Epoxy Nano Composites
- Moni, Mahabuba Porosh
- Feature Analysis and Predictive Modeling for Occupant-Centric Thermal Comfort in Naturally Ventilated University Cafeterias Using Advanced Machine Learning Models
- Mony, Mim
- Feature Analysis and Predictive Modeling for Occupant-Centric Thermal Comfort in Naturally Ventilated University Cafeterias Using Advanced Machine Learning Models
- Movlayev, Ibrahim
- Effect of Nano-Fillers on the Mechanical, Thermal, and Morphological Properties of Elastomer Composites: A Comparative Study of Silica, Graphene, Nano-Clay and Carbon Nanotubes
- Movlayev, Ibrahim
- Influence of SBR Content on the Mechanical, Thermal, and Morphological Behavior of NR–SBR Rubber Composites
- Mugalova, Gulshen. R.
- Azo Derivative of Pyrogallol as a New Reagent for Spectrophotometric Determination of Molybdenum
- Mukhtar, Aliyev Elman
- Performance Improvement of Cream Churning Using a Topologically Modified Dual Möbius Strip Working Body
- Mukhtarova, Sevinc
- Bridging Experiment and Computation: In Silico Admet, Protox-III, and Target-Guided Docking of Nitro-Substituted Dichlorodiazadienes
- Mukib, Md Al Hossain
- Predicting Indoor Air Quality in University Laboratories Using Classification-Based Machine Learning Models
- Muradov, P. Z.
- Technological Basis of Conversion of Plant Wastes to Into Food Products
- Musaev, M. A.
- Influence of Impurities on Liminescence Spectrum of ZnSe:Fe at Low Temperatures
- Musaev, M. A.
- Frequency-Dependent Electrical Conductivity of CVD-Grown ZnSe Polycrystals: Analysis Based on Jonscher’s Universal Power Law
- Musayeva, E.
- Influence of Fertilization Regimes on Productivity and Agro-Economic Indicators of Technical Grape Varieties (Vitis vinifera L.) in Karabakh
- Musayeva, E. S.
- Liquid-Phase Catalytic Oxidation of Alkenyl and Cycloalkenyl Aromatic Hydrocarbons with Hydrogen Peroxide
- Naghiyev, Tural
- Peer-Review Statements
- Naghiyeva, Nurana
- Future Challenges in Water Control to Ensure the Long-term Development of Oilfield Assets
- Nagiyev, T. G.
- Bulk Nanostructured Extruded Material Based on Bi₂Te₂.₇Se₀.₃ Solid Solution for Thermoelectric Converters
- Najafova, Aida
- The Impact of Climate Change on Vineyard Altitude
- Natiq, Shahla Yusifzadeh
- Prospects for Producing a Protein Additive with Antifreeze Properties from Germinated Faba vulgaris Moench Seeds Through Low-Temperature Bioactivation
- Nigmetzianov, Artur
- Selection of an Efficient Solvent for Asphalt-Resin-Paraffin Deposits Using Model and Actual Field Samples
- Niyazova, Ayten
- Bridging Experiment and Computation: In Silico Admet, Protox-III, and Target-Guided Docking of Nitro-Substituted Dichlorodiazadienes
- Nizami, Sevinc Guliyeva
- Application of Artificial Intelligence in Green Pyrolysis Technologies for Carbon Footprint Minimization
- Noroozicharandabi, Vahid
- Metal Recycling from the Cathode of Lithium-Ion Battery in the Aqueous Environment
- Nurgaliev, Danis
- Modern Technologies for Ranking Territories by Hydrocarbon Prospectivity Using Machine Learning
- Nurmuhammed, Mustafa
- Sustainable Public Transport for Urban Mobility: A Case Study on Replacing Internal Combustion Vehicles to Electric Buses
- Omarova, Nargiz
- Evaluation of Antioxidant Activity and Total Phenolic Content of Selected Cereal and Legume Samples
- Oyshi, Nowshin Nowyer
- Feature Analysis and Predictive Modeling for Occupant-Centric Thermal Comfort in Naturally Ventilated University Cafeterias Using Advanced Machine Learning Models
- Ozcan, H. Kurtulus
- Sustainable Office Water Strategies: Quantitative Analysis of Bottled, Filtered, and Tap Water Systems
- Panah, Muradov
- Impact of Environmental Factors on ex situ Phanerophytes
- Panahov, Geylani M.
- Technological Aspects for Viscoelastic Compositions Applications in Hydrocarbons Recovery and Transportation
- Pashabayli, N. A.
- Synthesis of Nitrogen-, Oxygen-, and Sulfur-Containing Derivatives of C₅–C₆ Alicyclic Olefins and Study of Their Bactericidal Activity
- Pimenov, Andrei
- Selection of an Efficient Solvent for Asphalt-Resin-Paraffin Deposits Using Model and Actual Field Samples
- Pimenov, А.
- Synthesis of Polyoxyalkylene Glycol-ether Active Bases for Demulsifying Compounds
- Pirieva, T. I.
- Bulk Nanostructured Extruded Material Based on Bi₂Te₂.₇Se₀.₃ Solid Solution for Thermoelectric Converters
- Pobon, Md. Mashnur Hossain
- Feature Ranking for Predicting Occupant Visual Comfort in Hospital Lobby Using Artificial Neural Networks (ANNs)
- Poptsov, Alexander
- Biologically Active Usaturated α,β-Ketones Containing a Cycloacetal Fragment
- Ragimova, N. A.
- Photoelectric Energy Conversion at a Metal-CdxHg₁-xTe Contact Under Conditions of Heating of Current Carriers by a Strong Electric Field
- Rahimli, A. M.
- Thermal Characterization of PS/TiO₂ and HDPE/TiO₂ Nanocomposites: Effects of TiO₂ Concentration on Dispersion and Thermal Stability
- Rahimova, Firangiz
- Influence of SBR Content on the Mechanical, Thermal, and Morphological Behavior of NR–SBR Rubber Composites
- Rahman, Md. Naziur
- Predicting Indoor Air Quality in University Laboratories Using Classification-Based Machine Learning Models
- Ramiz, Huseynov Nijat
- Investigation of Dynamic Modes of Smart Technology-Based Distribution Electric Networks
- Rana, Siddra
- Numerical Study of Porous Medium Effects in Thermal Radiation Influenced MHD Flow Around Stretching Cylinders
- Rasulov, E. A.
- Photoelectric Energy Conversion at a Metal-CdxHg₁-xTe Contact Under Conditions of Heating of Current Carriers by a Strong Electric Field
- Rizvi, Saadat Ali
- Impact of Turning Parameters on AISI 420 Stainless Steel by CNC Machining
- Rong, Yu
- Application of Phase Change Materials (PCM) in Solar Greenhouse Drying Systems
- Rzayev, R. F.
- Effect of Neutron Irradiation on the Structure and Atomic Dynamics of Y₂O₃ Nanoparticles
- Rzayev, Rovnag
- Peer-Review Statements
- Rzayev, Rovnag
- Investigation of the Effect Of Morphology, Electric Field, and Cooling Regime on the Mechanical Lifetime of Isotactic Polypropylene (iPP)-based SiO₂ Nanocomposites
- Rzayeva, Aysel Asif
- Modeling and Optimization of the Process of Separation of Heavy Metal Ions from Wastewater Aimed at Protecting the Ecosystem in Non-Stationary Conditions
- Sabirov, Xabibullo
- Determining External and System Effects on Reducing Waste Output of Photovoltaic Batteries Using PVsyst Software
- Sabzalieva, Ch. E.
- Structural and Optical Properties of P-type Cuprous Oxide (p-Cu₂O) Thin Films Prepared by Chemical Deposition
- Sadigov, Rafig
- Effects of Bentonite on the Dielectric Properties of High- Pressure Polyethylene
- Sadigov, Ramil Ali
- Geo-information Modeling and Spatial Analysis of Environmental and Infrastructure Parameters in the Shusha Region Using Satellite Imagery and GIS Technologies
- Sadygov, O. A.
- Synthesis of Nitrogen-, Oxygen-, and Sulfur-Containing Derivatives of C₅–C₆ Alicyclic Olefins and Study of Their Bactericidal Activity
- Safin, Timur
- Modern Technologies for Ranking Territories by Hydrocarbon Prospectivity Using Machine Learning
- Salimgareev, R.
- An Economic and Geographical Analysis of Solar Power Plant Potential in Russian Federation Regions
- Salimov, V.
- Influence of Fertilization Regimes on Productivity and Agro-Economic Indicators of Technical Grape Varieties (Vitis vinifera L.) in Karabakh
- Sarıgül, Ismail
- Electromagnetic Fault Analysis of a Power Transformer Using Ansys@ Maxwell
- Sarıgül, İsmail
- Integrated Maxwell–Twin Builder Co-Simulation for Transformer Fault and Reclosing Analysis
- Shafieva, R. N.
- Сomparatıve Analysis of Natural Perlite and Natural Mordenite as Catalysts
- Shafiyeva, B. F.
- Сomparatıve Analysis of Natural Perlite and Natural Mordenite as Catalysts
- Shahid, Saba
- Numerical Study of Porous Medium Effects in Thermal Radiation Influenced MHD Flow Around Stretching Cylinders
- Shamil, Ibrahimov Famil
- Investigation of Dynamic Modes of Smart Technology-Based Distribution Electric Networks
- Shamsiyeva, N. Sh.
- Assessment of Terry Towels Strength
- Shikhaliyev, Namiq
- Bridging Experiment and Computation: In Silico Admet, Protox-III, and Target-Guided Docking of Nitro-Substituted Dichlorodiazadienes
- Shirinova, Gulnar
- Development of Biodegradable PLA-Based Colorimetric Films Incorporating Red Cabbage Anthocyanin for Real-time Food Freshness Monitoring
- Shovon, S. K. F. Alam
- Development of a Cost-Effective Smart Wearable ECG Watch for Enhanced Cardiovascular Health Monitoring
- Shukurov, Azamat
- Determination of Final Energy Consumption in the Residential Sector of Uzbekistan
- Shukurov, Azamat
- Assessment of Energy Flexibility of Residential Buildings with Phase Change Materials in Uzbekistan Using the Flexibility Evaluation Tool