Proceedings of the 2nd International Conference on Education, Science, and Technology (ICEST 2017)

A Comparative Study on Tensile Strength, Hardness, and Microstructure at ST.42 Steel Plate Welded with Electric and Acetylene Welding

Authors
Badaruddin Anwar
Corresponding Author
Badaruddin Anwar
Available Online September 2017.
DOI
10.2991/icest-17.2017.76How to use a DOI?
Keywords
tensile strength, hardness, microstructure,electric, acetylene welding
Abstract

This study aims to determine the physical and mechanical properties of the steel plate welded ST.42 after using electric and acetylene welding. It is also to know the difference in tensile strength, hardness, and microstructure on ST.42 steel plate welded in both welding process. The research data was obtained with experimental methods by comparing the tensile strength, hardness, and microstructure for both welding process and was tested by using universal testing tool such as Vickers hardness test and digital microscope. Data were analyzed with descriptive statistics and inferential statistics. The object of this study was ST.42 steel available in the market. Results of the data analysis showed that there is no significant difference between the tensile strength, Vickers hardness numbers, and the microstructure of the steel grain pearlite and ferrite results for both electric and acetylene welding on steel plate ST.42. The magnitude of the tensile strength of electric welding had maximum tensile strength of 361.1460 kg/mm2 with a maximum tensile force of 115.5667 N. The amount of tensile strength through Oxyacetylene welding had a maximum tensile strength of 58.2500 kg/mm2 with a maximum tensile force of 18.6400 N. The magnitude of Vickers hardness number of electric welding was in average of 936.5443 HV. On the other hand, Vickers hardness number of Oxyacetylene was in average of 902.5220 HV. The results of microstructure through electric welding were 66.8496 m for steel grain pearlite and 29.3485 m for steel grain pearlite. The amount of those of Oxyacetylene welding were 58.5267 m for steel grain pearlite and 29.3585 m for grain ferrite steel.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2nd International Conference on Education, Science, and Technology (ICEST 2017)
Series
Advances in Social Science, Education and Humanities Research
Publication Date
September 2017
ISBN
10.2991/icest-17.2017.76
ISSN
2352-5398
DOI
10.2991/icest-17.2017.76How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Badaruddin Anwar
PY  - 2017/09
DA  - 2017/09
TI  - A Comparative Study on Tensile Strength, Hardness, and Microstructure at ST.42 Steel Plate Welded with Electric and Acetylene Welding
BT  - Proceedings of the 2nd International Conference on Education, Science, and Technology (ICEST 2017)
PB  - Atlantis Press
SP  - 234
EP  - 236
SN  - 2352-5398
UR  - https://doi.org/10.2991/icest-17.2017.76
DO  - 10.2991/icest-17.2017.76
ID  - Anwar2017/09
ER  -