Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)

<Previous Article In Volume
Next Article In Volume>

Hot Stamping of Zn-Coated PHS Steel Using Atomization Precooling Technology

Authors
H. Y. Xie1, *, B. Q. An1, Y. Z. Geng1, Y. P. Sun1, H. H. Yang1, Y. H. Zhao1, W. D. Zhu1, Y. X. Xia1, Z. Y. Han2
1PHS Branch Institute of Lingyun Central Research Institute, Yantai, Shandong, China
2E-Mobility Tech. R&D Branch of Lingyun Central Research Institute, Shanghai, China
*Corresponding author. Email: xiehuanyang@lygf.com
Corresponding Author
H. Y. Xie
Available Online 2 March 2023.
DOI
10.2991/978-94-6463-114-2_28How to use a DOI?
Keywords
Zn-coated PHS; Liquid metal induced embrittlement; Atomization; Hot stamping
Abstract

In this paper, hot stamping of Zn-coated PHS was introduced. Targeting to control or eliminate the liquid metal induced embrittlement phenomenon, a self-make atomization precooling apparatus was developed to solidification the melted coating during the former heating process. The key role of the apparatus was to provide foggy environment around the heated blank to lower its temperature both rapidly and homogeneously. The relationship between atomization intensity and properties of the hot stamping parts was studied. Low medium flow condition of 50 L/h and high medium flow condition of 100L/h were adopted with the same other test parameters. Mechanical properties and microstructure as well as LME were detected. The results show that under low medium flow condition, no qualified products can be deserved while with high medium flow condition, qualified products can be achieved.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)
Series
Atlantis Highlights in Material Sciences and Technology
Publication Date
2 March 2023
ISBN
10.2991/978-94-6463-114-2_28
ISSN
2590-3217
DOI
10.2991/978-94-6463-114-2_28How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - H. Y. Xie
AU  - B. Q. An
AU  - Y. Z. Geng
AU  - Y. P. Sun
AU  - H. H. Yang
AU  - Y. H. Zhao
AU  - W. D. Zhu
AU  - Y. X. Xia
AU  - Z. Y. Han
PY  - 2023
DA  - 2023/03/02
TI  - Hot Stamping of Zn-Coated PHS Steel Using Atomization Precooling Technology
BT  - Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)
PB  - Atlantis Press
SP  - 211
EP  - 216
SN  - 2590-3217
UR  - https://doi.org/10.2991/978-94-6463-114-2_28
DO  - 10.2991/978-94-6463-114-2_28
ID  - Xie2023
ER  -