Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)

<Previous Article In Volume
Next Article In Volume>

Effects of Different Baking Temperature on Three-Point Bending Properties of 1800 MPa Al-Si Coating Hot Stamping Steel

Authors
B. M. Zhang1, *, D. C. Xu1, H. F. Zhao1, H. X. Teng1
1Research Institute of Technology of Shougang Group Co., Ltd., Beijing, 100043, China
*Corresponding author. Email: DiamanteZBM@163.com
Corresponding Author
B. M. Zhang
Available Online 2 March 2023.
DOI
10.2991/978-94-6463-114-2_8How to use a DOI?
Keywords
1800 MPa hot stamping steel; Three-point properties; Microstructure
Abstract

To study the effects of baking temperature on the three-point bending properties of 1800 MPa hot stamping steel, cold-rolled 1800 MPa hot stamping steel with Al-Si coating was used. The heating condition was 930 ℃ for 300 s, after hot stamping, the samples were baking under 140 ℃, 170 ℃, 200 ℃, 230 ℃ and 260℃ respectively. SEM were used to analysis the microstructure of the samples. The bending tests were carried out according to VDA 238-100. The results show that baking process can effectively improve the bending properties of 1800 MPa hot stamping steel. After baking under 260 ℃, the bending angle increased by 43%. After baking, the microstructure is martensite, tempered martensite and carbides. In conclusion, baking process can improve the three-point bending properties of 1800 MPa hot stamping steel.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)
Series
Atlantis Highlights in Material Sciences and Technology
Publication Date
2 March 2023
ISBN
10.2991/978-94-6463-114-2_8
ISSN
2590-3217
DOI
10.2991/978-94-6463-114-2_8How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - B. M. Zhang
AU  - D. C. Xu
AU  - H. F. Zhao
AU  - H. X. Teng
PY  - 2023
DA  - 2023/03/02
TI  - Effects of Different Baking Temperature on Three-Point Bending Properties of 1800 MPa Al-Si Coating Hot Stamping Steel
BT  - Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)
PB  - Atlantis Press
SP  - 53
EP  - 58
SN  - 2590-3217
UR  - https://doi.org/10.2991/978-94-6463-114-2_8
DO  - 10.2991/978-94-6463-114-2_8
ID  - Zhang2023
ER  -